F-219 (Rev 23JAN19)
TFM11502LS
TFM11002LDLC
TFM11001LDRE1WT
TFML11502LDK
(1.27 mm) .050"
SMT & THROUGH-HOLE HEADER
Shrouded body
for blind mating
TFM Board Mates: (1.27 mm x 1.27 mm)
SPECIFICATIONS
SFM, SFMC .050" x .050"
micro pitch
For complete specifications and
TFM Cable Mates:
recommended PCB layouts
SFSD
see www.samtec.com?TFM or
www.samtec.com?TFML
TFML Board Mates:
Insulator Material:
SFML
Black Liquid Crystal Polymer
Terminal Material:
TFM-DH Board Mates:
APPLICATIONS
Phosphor Bronze
SFM (-DH), SFMC
Plating:
Au or Sn over 50 (1.27 m) Ni
TFM-DH Cable Mates:
Current Rating (TFM/SFM):
SFSDX (-S, -D, -SR, -DR)
3.2 A per pin
(2 pins powered)
Voltage Rating:
250 VAC mated with SFM
Operating Temp Range: TFM-DH to SFM-DH SHOWN
10 YEAR MFG
Surface mount or
-55 C to +125 C
WITH 30 GOLD
RoHS Compliant:
through-hole tails
EXTENDED LIFE
Yes
PRODUCT
HIGH-SPEED CHANNEL PERFORMANCE
HIGH MATING
CYCLES
PROCESSING
Rating based on Samtec reference
channel. For full SI performance data
Lead-Free Solderable:
visit Samtec.com or contact 8
Yes
Gbps TFM to SFM-SH SHOWN
SIG@samtec.com
SMT Lead Coplanarity:
(0.10 mm) .004" max (05-25)
(0.15 mm) .006" max (30-50)*
TYPE NO. PINS PLATING
*(.004" stencil solution
LEAD STYLE
1
may be available; contact
STRIP PER ROW OPTION
IPG@samtec.com)
RECOGNITIONS
Specify
L
For complete scope 03, 04, 06, 08
of recognitions see = 15 (0.38 m)
(TFM 01 & 02 only) LEAD STYLE
TFM
www.samtec.com/quality
Gold on post,
from chart
= Standard
Matte Tin on tail
05, 07, 10, 15, 20,
(Call Samtec for
FILE NO. E111594
E.L.P. plating option)
25, 30, 35, 40, 45, 50
TFML
(Standard sizes)
= Locking
(01 & 02
lead style only) OTHER SOLUTIONS
(1.27) .050 x
MATED HEIGHTS
Lower cost plating options.
No. of Positions + (3.18) .125
(2.79)
LEAD STYLE See TFC Series.
MATED .110
HEIGHT*
TFM SFM
(4.45)
(6.35) .250 .175
02
LEAD
12 (8.13) .320
01
STYLE B C
02
LEAD
SINGLE ROW
(9.91) .390
22 (T/H)
(1.14)
STYLE A
(See website for DS & WT OAL) .045
(11.81) .465 01 (5.59) .220 (1.97) .078 (SMT)
32
REX = (1.27) .050 x
LEAD STYLE (5.59) .220 (2.77) .109 02 (5.72) .225
MATED 03*
No. of Positions + (6.68) .263
HEIGHT* (1.27)
TFM SFM
12* (7.49) .295
11* (7.37) .290 (1.97) .078 02 (1.27)
.050
(5.97) .235 .050
01 (9.27) .365
(7.37) .290 (2.77) .109 22*
13*
DIA
A
(5.97) .235 (5.72)
03 32* (11.18) .440
21* (9.14) .360 (1.97) .078
(SMT or TH)
.225
(7.75) .305 * N/A with 07, -DH or
11 23* (9.14) .360 (2.77) .109
-S row option
13 01 (7.75) .305 (11.05) .435 (1.97) .078
31*
01
(1.27) .050
(9.53) .375 * Not Available with 07 or -S row option
21 DOUBLE ROW
(0.46) .018 DIA
(9.53) .375
23
(11.43) .450
31
(1.40)
*Processing conditions will .055
B A
affect mated height.
(2.35)
(1.42)
(0.64) .093
C (0.36) .014 .056
.025
Note:
LC WT
THROUGH-HOLE SURFACE MOUNT
Some sizes, styles and
(SMT or TH) (01 & 02 ONLY)
options are non-standard,
non-returnable.
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
All parts within this catalog are built to Samtecs specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.TFM10501LDRA
TFML15001LDLC
TFM12501LDWT
TFM11002LDH
TFM11002LDDS
TFM, TFML SERIES
SMT & THROUGH-HOLE HEADER
Shrouded body for
(1.27 mm) blind mating
.050" pitch
Passes 10 Year MFG
Locking option
Surface mount or
Locking clip option
through-hole tails
Weld tab option
Mates with SFM for
Screw down
Screw down option
coplanar mating Weld tab
option
option
ROW
OPTION
OPTION
Specify only RA, RE1 or RE2 Specify only A, LC, DS or WT SMT lead styles only
S
Not available with RA, RE1 and RE2 Specify only K or P
= Single Row
RA
unless otherwise noted.
(TFM only)
= Right-angle K
(Lead style 01 only) A = Polyimide Film Pick & Place Pad
= Alignment Pin
D
= Double Row
RE1 P
= Right-angle Elevated for (1.58 mm) .062" PCB LC = Plastic Pick & Place Pad
(Requires TFM lead style 01, D row and WT) = Locking Clip (5 positions minimum)
DH*
(Manual Placement required) (Not available with
= Double Horizontal
5 position with WT)
(TFM lead style 02 only)
RE2
(05 thru 50 positions only)
= Right-angle Elevated for (2.36 mm) .093" PCB DS
Specify TR last
(TR option only
(Requires TFM lead style 01, D row and WT) = Dual Screw Down for
available)
(1.60 mm) .062" PCB TR
(05, 07, 10, 15, 20, 25, 30, = Tape & Reel
Note: The recommended -REX PCB board layout
is different from the -RA. Contact IPG@samtec.com 35, 40 positions only) (Not available with DS)
before designing your board for specifications.
(TFM lead styles 01 and 02 only)
(Requires D row option)
(Mates with SFMDS option and
SFSD/SFSDT SS and DS option only)
(Not available with A, LC,
(0.76)
WT, K, P, TR)
.030
(1.91)
(2.26)
.075
.089
WT
(1.27)
DH* (0.51) .020
= Weld Tab
.050 ALSO AVAILABLE
RA
(TFM lead styles 01 and 02 only)
(MOQ Required)
(Required callout for RE1 & RE2)
(Mates to SFSS/SFSD SR and Solder nail option
DR option only)
Other sizes
(6.48)
(05, 07, 10, 15, 20, 25, 30, 35,
.255
Other platings
40, 45, 50 positions only)
(1.99)
.079
(3.81)
* Note:
.150
Weld tab is standard on DH option.
(1.91)
(0.51) .020
No need to specify WT.
DS .075
(D, 01 & 02 ONLY) RE1 & RE2
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
All parts within this catalog are built to Samtecs specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.