COST-EFFECTIVE & DUAL WIPE SOCKETS 8 Gbps (2.00 mm) .0787 PITCH TLE/CLT SERIES TLE NO. PINS PLATING OPTION Mates: TLE 1 01 DV - PER ROW - - OPTION - - TMMH, TMM, MTMM, MMT, TW, LTMM, ZLTMM, TCMD, TSH 02 thru 50 G A = 10 (0.25 m) = Alignment Pin Gold (3 positions minimum) CLT Mates: K TMM, TMMH, MTMM, = (5.00 mm) .197 DIA MMT, TW, TSH Polyimide Film Pick & Place Pad No. of positions x (3 positions minimum) (2.00) .0787 SPECIFICATIONS P = Metal Pick & Place Pad (4.00) TLE (4 positions minimum) .157 Insulator Material: Black Liquid Crystal Polymer TR Contact Material: = Tape & Reel Packaging A Option Phosphor Bronze (2-37 positions only) Plating: Au over 50 (1.27 m) Ni -FR Current Rating (TLE/TMMH): = Full Reel Tape & Reel (4.32) 3.2 A per pin (4.50) (must order maximum .170 (2 pins powered) .177 quantity per reel contact Operating Temp Range: P Option Samtec for quantity breaks) -55 C to +125 C (5.51) (2-37 positions only) Insertion Depth: .217 (2.08 mm) .082 to (4.37 mm) .172 with (0.38 mm) .015 wipe, pass-through, or (3.35 mm) .132 min for bottom entry NO. PINS LEAD PLATING OTHER CLT 1 D - PER ROW - STYLE - OPTION - - OPTIONS CLT Same as TLE except: Plating: Sn or Au over 50 (1.27 m) Ni All options require 02 thru 50 01 F Current Rating (TMMH/CLT): Style 02 = Through- = Gold flash 4.1 A per pin hole on contact, (2 pins powered) BE Matte Tin on tail Insertion Depth: = Bottom Entry Top Entry= 02 (Required for bottom (1.40 mm) .055 minimum = Surface L entry applications) Bottom Entry= Mount = 10 (0.25 m) (2.57 mm) .101 minimum ALSO AVAILABLE Gold on contact, (add board thickness for A Matte Tin on tail 03 correct post OAL) = Alignment Pin Other Platings = Through- Max Cycles: (3 positions minimum) (MOQ Required) hole G 100 with 10 (0.25 m) Au Metal or plastic at = 10 (0.25 m) No. of positions x Samtecs discretion Gold on contact, (2.00) .0787 Gold flash on tail PROCESSING K = (5.00 mm) .197 DIA (4.00) Polyimide Film TLE .157 Pick & Place Pad LeadFree Solderable: (04 thru 50 only) Yes SMT Lead Coplanarity: (2.13) (0.10 mm) .004 max (02-26) P .084 (0.15 mm) .006 max (27-50)* = Pick & Place Pad *(.004 stencil solution (4 positions minimum) (2.27) may be available contact (Not always necessary .090 ipg samtec.com) for auto placement.) (5.16) A CLT A Option .203 Same as TLE except: (3.02) TR SMT Lead Coplanarity: .119 02 = Tape & Reel (0.10 mm) .004 max (02-25) (36 positions max) 01 or 03 (0.15 mm) .006 max (26-34)* (0.20 mm) .008 max (35-50)* FR *(.004 stencil solution = Full Reel Tape & Reel LEAD STYLE A may be available contact (must order maximum P Option ipg samtec.com) quantity per reel 01 (2.16) .085 contact Samtec for Note: 03 (2.95) .116 quantity breaks) Some lengths, styles and (36 positions max) options are non-standard, non-returnable. F-221 Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Headers & Wire Housings category: Click to view products by Samtec manufacturer: Other Similar products are found below : 892-18-020-10-001101 58102-G61-06LF 582553-1 0009485154 009176003701906 0050291907 LY20-4P-DT1-P1E-BR 02.125.8002.8 609-3404 61062-3 61082-181009 622-3653LF 63453-116 636-1030 636-1427 636-3427 636-4007 641938-9 641991-4 644827-2 65817- 010LF 65817-015LF 65863-015LF 66207-023LF 67095-007LF 67601157 68645-018 68648-049 70.362.1628.0 70-4210 70-4226B 70- 4853B 707-5020 707-5028 71.350.2428.0 71918-208LF 71961-016LF 733-134 733-162 754199-000 760-3052 79531-3000 FCN- 360C032-B FCN-367T-T012/H FCN-723D010/2 80.063.4001.1 800-90-001-10-001000 800-90-010-10-002000 801-43-002-10-013000 801-43-006-10-002000