TMMH-105-01-L-D-004 Samtec

F-219 TMMH11604L6 TMMH12504FDEP (2.00 mm) .0787 FLEXIBLE THROUGH-HOLE HEADER Choice of 2, 3, 4, 5 and 6 rows on (2.00 mm) Board Mates: .0787 pitch (2.00 mm) SPECIFICATIONS CLT, SQT, SQW, ESQT, .0787 TLE, SMM, MMS For complete specifications see www.samtec.com TMMH Cable Mates: Insulator Material: 10 YEAR MFG TCSD WITH 30 GOLD Black Liquid Crystal Polymer Terminal Material: EXTENDED LIFE Phosphor Bronze PRODUCT Plating: HIGH MATING Sn or Au over CYCLES 50 (1.27 m) Ni Current Rating (TMMH/ESQT): 4.5 A per pin (2 pins powered) APPLICATION Current Rating (TMMH/SQT): 5.1 A per pin (2 pins powered) Operating Temp Range: Through-hole -55 C to +105 C with Tin -55 C to +125 C with Gold Voltage Rating: 281 VAC mated with SQW (2.00 mm) 250 VAC mated with SQT .0787 ALSO AVAILABLE RoHS Compliant: (MOQ Required) Yes Retention Clip Option (RC) LeadFree Solderable: Yes Other platings RECOGNITIONS NO. PINS LEAD PLATING For complete scope 1 TMMH of recognitions see PER ROW STYLE OPTION www.samtec.com/quality FILE NO. E111594 Specify F Note: LEAD STYLE = Gold flash Some lengths, styles and 03 thru 50 from chart on post, options are non-standard, Matte Tin on tail non-returnable. LEAD A B C L Other Solutions OPTION STYLE Z = 10 (0.25 m) (7.67) (3.20) (2.46) Gold on post, (2.92) 01 06 300 Press-fit ES .302 .126 .097 .115 Matte Tin on tail See PTT Series. No. of (6.45) (1.91) (2.57) (4.70) rows 04 EC .254 .075 .101 .185 x T (5.94) (1.65) (2.29) (2.00) (6.10) 05 EP & EPC = Matte Tin Surface .234 .065 .090 .0787 .240 Mount (8.74) (3.20) (3.53) 01 295 (4.45) EL & EBC 06 See previous page344 .126 .139 .175 (2.00) (2.00) .0787 .0787 Low Profile No. of positions x (2.00) .0787 + Z (2.00) 100 02 See TMM Series0787 B (6.35) A .250 Right-angle C Four Row 01 (Shrouded option requires -D) 99 See TMM Series. T Q D No. of positions x (2.00) .0787 (2.00) .0787 (2.00) .0787 Shrouded (2.00) Four Row .0787 B Vertical & A Right-angle See TMMS Series. C Paste In Hole (PIH) processing. (0.50) .020 5 6 (2.00) .0787 Contact Samtec ASP Group for SQ part customization. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.TMMH12504FDRAES TMMH11804TDEL TMMH11004LD TMMH12001LDRA TMMH10901LD TMMH SERIES FLEXIBLE THROUGH-HOLE HEADER Right-angle FLEX SHROUD OPTIONS option EL OPTION EBC OPTION ES OPTION APPLICATIONS SQT TMMH Optional EP OPTION end shrouds EPC OPTION HORIZONTAL ROW OTHER TAIL OPTION FLEX SHROUD OPTIONS OPTION OPTIONS Flex Shroud requires -D row & 9 pins/row minimum XXX D RA (For board-to-board interfaces. Will not mate with TCSD) = Polarized Position = Double Row = Right-angle (Specify position (Required for (Double & Triple Row only) ES of omitted pin) Flex Shroud (ES, EP, EL Double Row only) = End Shroud option) (EC, EBC and EPC not available) (06 Lead style not available) RC EC = Retention Clip T = End Shroud with Locking Clip (Mates to TCSD) = Triple Row B (1.27) (Manual placement required) (Double row only, .050 minimum position 4 Q and available only EP = Four Row 06 lead style) = End Shroud with Guide Post (2.62) .103 (3.20) 5 (2.00) .126 EL = Five Row .0787 D RA = End Shroud with Board Lock T RA (Boards are positively locked and cannot be unmated) 6 (Lead style 01 only) = Six Row EBC LEAD = End Shroud with Board Lock and Locking Clip X Y STYLE (Boards are positively locked and cannot be unmated) D (5.84) (4.45) 01 .230 .175 E EPC LEAD D RA ES 04 & (4.50) (3.02) RC D E = End Shroud with Guide Post and Locking Clip (RA also available with .177 .119 05 STYLE (Manual placement required) other flex shroud options) (2.34) (6.60) (4.00) 01 .092 .260 (1.17) .157 (3.20) .046 (2.62) (5.26) (1.91) .126 04 .103 .207 .075 Y Y DIA (3.12) (5.26) 05 (2.03) .123 .207 (1.83) (2.44) (1.83) .080 .072 .096 (1.83) .072 X .072 (2.29) .090 (1.41) .056 (1.41) (1.41) .056 D EL D ES .056 D EBC D EC D EPC D EP Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.