NOTES: TMMH-1XX-XX-XX-DV-XXX-XX REVISION CG 1. REPRESENTS A CRITICAL DIMENSION.C 2. MEASURED AT BEND RADIUS, NOT AT END OF PIN. No OF POS OPTION 3. TUBE ONLY -05 THROUGH -50 POSITIONS. -02 THRU -50 -TR: TAPE & REEL PACKAGING 4. GOLD PLATING TO BE ON POST, TIN PLATING ON TAIL. (PER ROW) (36 POS MAX CONTACT SAMTEC FOR LARGER POSITIONS) 5. PARTS MAY BE CUT TO POSITION. DO NOT 6. MINIMUM PUSHOUT FORCE: 1.0 LB. SCALE FROM LEAD STYLE 7. SURFACE MOUNT TAILS TO BE SHEARED TO OPTIONS ** THIS PRINT -01: .126 3.20 DIMENSION ON STYLE -05 ONLY. -M: PICK & PLACE PAD (USE PPP-10) (USE T-1S13-07-XX-2) (SEE FIG 3 5 POS MIN) 8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE -04: .075 1.91 -ES: END SHROUDS (SEE FIG 4, SHT 2, 9 POS MIN) NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH (USE T-1S13-04-XX-2) -EC: LOCKING CLIP (SEE FIG 6, SHT 3, 9 POS MIN, DO NOT USE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL -05: .065 1.65 MIN -A OR -LC, SEE NOTE 8) PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC, (USE T-1S13-20-XX-2) -EP: GUIDE POST (SEE FIG 9, SHT 4, 9 POS MIN) -EC, -EBC AND -EPC OPTIONS. -EL: BOARD LOCK (SEE FIG 5, SHT 3, 9 POS MIN) PLATING -LC: FLEX MOLD LOCKING CLIP (USE LC-09-TM, SEE FIG 2, SHEET 2, -L: 15 LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL 5 POS MIN, SEE NOTE 8) -F: 3 FLASH GOLD IN CONTACT AREA, MATTE TIN ON TAIL -A: ALIGNMENT PIN (USE TMMH-50-D-A-XX, SEE FIG 2, SHEET 2 -S: 30 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL 3 POS MIN) -G: 20 GOLD IN CONTACT AREA, 3 MIN GOLD ON TAIL -EBC: BOARD LOCK WITH LOCKING CLIP (SEE FIG 8 SHT 4, 9 POS MIN -T: MATTE TIN ON CONTACT AND TAIL NOT AVAILABLE WITH -A OR -LC, SEE NOTE 8) -H: 30 HEAVY GOLD IN CONTACT AREA, 3 MIN GOLD ON TAIL -EPC: GUIDE POST WITH LOCKING CLIP (SEE FIG 7, SHT 3, 9 POS MIN -TM: MATTE TIN CONTACT AND TAIL NOT AVAILABLE WITH -A OR -LC, SEE NOTE 8) -LM: 15 LIGHT SECLECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -XXX: POLARIZATION (SPECIFY POS -XXX TO BE OMITTED -SM: 30 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -FM: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL +.005 .13 (No OF POS x .07874 2.000 ) -.015 .38 ROW OPTION -DV: DOUBLE VERTICAL .03937 1.000 (No OF POS x .07874 2.000 ) - .07874 2.000 ** ALL OPTIONS EXCEPT THE -EX / -A / -LC OPTIONS (USE TMMX-50-D-X-XX) USE THE TMMC-50-D-X-XX REF REF -EX / -A / -LC OPTIONS USE THE TMMH-50-D-XX-XX 02 100 .157 3.99 .07874.0040 2.000.10 C REF TMMX-XX-D-X 01 99 2 MAX SWAY (EITHER DIRECTION) 2 MAX SWAY .020 0.50 SQ 2 MAX SWAY (EITHER DIRECTION) (EITHER DIRECTION) REF T-1S13-XX-XX-2 CONTACT AREA (SEE NOTE 4) 903 C +.005 +0.13 .099 2.51 .0790 2.007 REF -.002 -0.05 (SEE NOTE 2) .004 0.10 .277 7.04 REF (SEE NOTE 7) .06 1.5 REF FIG 1 PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, (TMMH-150-XX-XX-DV SHOWN) THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 0.3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY CRITICAL DIMENSION INSPECTION INSTRUCTION TABLE .XXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 0.051 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 IN-PROCESS INSPECTION ASSEMBLY OPERATION MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 1:1 DESCRIPTION: BODIES: LCP, UL 94 VO FILL C1 2MM X 2MM TERMINAL STRIP ASSEMBLY COLOR: BLACK REPRESS C2 TERMINAL: DWG. NO. PHOSPHOR BRONZE, ALLOY TMMH-1XX-XX-XX-DV-XXX-XX-ASM MAX. CUT FLASH: .020 .51 BY: PURVIS 10/08/1996 SHEET OF1 5 C: EnterpriseVault DWG MISC MKTG TMMH-1XX-XX-XX-DV-XXX-XX-MKT.SLDDRWREVISION CG .125.010 3.180.25 .020 0.51 (SEE NOTE 7) IN-PROCESS 4 IN-PROCESS IN-PROCESS 3 IN-PROCESS 1 FOR STYLE -05 (No OF POS x .07874 2.000 ) - .15784 4.000 .060 1.52 .075 1.90 .400 10.16 REF .056 1.42 REF (NO OF POS x .07874 2.000 LC-09-TM .043 1.09 -.4000 10.160 )/2 -A -LC .020 .51 FIG 2 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) PPP-10 (No OF POS x .07874 2.000 ) + .115 2.92 .008 FIG 3 -M (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) TMMH-ES-XX .250 6.35 .387 9.83 REF PROPRIETARY NOTE * * REF THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REF 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 DO NOT SCALE DRAWING DESCRIPTION: 2MM X 2MM TERMINAL STRIP ASSEMBLY FIG 4 DWG. NO. -ES (DIFFERENT AS SHOWN, TMMH-1XX-XX-XX-DV-XXX-XX-ASM OTHERWISE SAME AS FIG 1) C: EnterpriseVault DWG MISC MKTG TMMH-1XX-XX-XX-DV-XXX-XX-MKT.SLDDRW BY: PURVIS 10/08/1996 SHEET OF2 5