NOTES: TMMH-1XX-XX-XX-DV-XXX-TR REVISION CE 1. REPRESENTS A CRITICAL DIMENSION. 2. MEASURED AT BEND RADIUS, NOT AT END OF PIN. No OF POS OPTION 3. TUBE ONLY -05 THROUGH -50 POSITIONS. -02 THRU -50 -TR: TAPE & REEL PACKAGING 4. GOLD PLATING TO BE ON POST, TIN PLATING ON TAIL. (PER ROW) (36 POS MAX CONTACT SAMTEC FOR LARGER POSITIONS) 5. PARTS MAY BE CUT TO POSITION. 6. MINIMUM PUSHOUT FORCE: 1.0 LB. 7. SURFACE MOUNT TAILS TO BE SHEARED TO LEAD STYLE DIMENSION ON STYLE -05 ONLY. OPTIONS ** -01: .126 3.20 8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE -M: PICK & PLACE PAD (USE PPP-10) (USE T-1S13-07-XX-2) NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH (SEE FIG 3 5 POS MIN) -04: .075 1.91 AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL -ES: END SHROUDS (SEE FIG 4, SHT 2, 9 POS MIN) (USE T-1S13-04-XX-2) PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC, -EC: LOCKING CLIP (SEE FIG 6, SHT 3, 9 POS MIN, DO NOT USE WITH -05: .065 1.65 MIN -EC, -EBC AND -EPC OPTIONS. -A OR -LC, SEE NOTE 8) (USE T-1S13-20-XX-2) -EP: GUIDE POST (SEE FIG 9, SHT 2, 9 POS MIN) PLATING -EL: BOARD LOCK (SEE FIG 5, SHT 3, 9 POS MIN) -L: 15 LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -LC: FLEX MOLD LOCKING CLIP (USE LC-09-TM, SEE FIG 2, SHEET 2, -F: 3 FLASH GOLD IN CONTACT AREA, MATTE TIN ON TAIL 5 POS MIN, SEE NOTE 8) -S: 30 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -A: ALIGNMENT PIN (USE TMMH-50-D-A-XX, SEE FIG 2, SHEET 2 -G: 20 GOLD IN CONTACT AREA, 3 MIN GOLD ON TAIL 3 POS MIN) -T: MATTE TIN ON CONTACT AND TAIL -EBC: BOARD LOCK WITH LOCKING CLIP (SEE FIG 8 SHT 4, 9 POS MIN -H: 30 HEAVY GOLD IN CONTACT AREA, 3 MIN GOLD ON TAIL NOT AVAILABLE WITH -A OR -LC, SEE NOTE 8) -TM: MATTE TIN CONTACT AND TAIL -EPC: GUIDE POST WITH LOCKING CLIP (SEE FIG 7, SHT 3, 9 POS MIN -LM: 15 LIGHT SECLECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL NOT AVAILABLE WITH -A OR -LC, SEE NOTE 8) -SM: 30 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -XXX: POLARIZATION (SPECIFY POS -XXX TO BE OMITTED -FM: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL +.005 .13 (No OF POS x .07874 2.000 ) -.015 .38 ROW OPTION -DV: DOUBLE VERTICAL .03937 1.000 (No OF POS x .07874 2.000 ) - .07874 2.000 DO NOT ** ALL OPTIONS EXCEPT THE -EX / -A / -LC OPTIONS (USE TMMX-50-D-X-XX) USE THE TMMC-50-D-X-XX SCALE FROM REF REF -EX / -A / -LC OPTIONS USE THE TMMH-50-D-XX-XX THIS PRINT 02 100 C .157 3.99 .07874.0040 2.000.10 REF TMMX-XX-D-X 01 99 2 MAX SWAY (EITHER DIRECTION) 2 MAX SWAY .020 0.50 SQ 2 MAX SWAY (EITHER DIRECTION) (EITHER DIRECTION) REF T-1S13-XX-XX-2 903 C CONTACT AREA (SEE NOTE 4) +.005 +0.13 .099 2.51 .0790 2.007 REF -.002 -0.05 (SEE NOTE 2) .004 .10 .277 7.04 REF (SEE NOTE 7) .06 1.5 REF FIG 1 UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE (TMMH-150-XX-XX-DV SHOWN) DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS CRITICAL DIMENSION INSPECTION INSTRUCTION TABLE .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN .XXXX: .0020 .051 CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 ASSEMBLY OPERATION IN-PROCESS INSPECTION MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 1:1 DESCRIPTION: BODIES: LCP, UL 94 VO FILL C1 2MM X 2MM TERMINAL STRIP ASSEMBLY COLOR: BLACK TERMINAL: DWG. NO. REPRESS C2 PHOSPHOR BRONZE, ALLOY TMMH-1XX-XX-XX-DV-XXX-TR-ASM MAX. CUT FLASH: .020 .51 BY: PURVIS 10/08/1996 SHEET OF1 5 F: DWG MISC MKTG TMMH-1XX-XX-XX-DV-XXX-TR-ASM-MKT.SLDDRWREVISION CE .125.010 3.180.25 (SEE NOTE 7) .045 1.14 IN-PROCESS 4 IN-PROCESS IN-PROCESS 3 IN-PROCESS 1 FOR STYLE -05 (No OF POS x .07874 2.000 ) - .15784 4.000 .060 1.52 .075 1.91 .400 10.16 REF .056 1.42 REF (NO OF POS x .07874 2.000 LC-09-TM .043 1.09 -.4000 10.160 )/2 -A -LC .020 .51 FIG 2 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) PPP-10 (No OF POS x .07874 2.000 ) + .115 2.92 .008 FIG 3 -M (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) TMMH-ES-XX .250 6.35 .387 9.83 REF PROPRIETARY NOTE REF THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY REF 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN PHONE: 812-944-6733 FAX: 812-948-5047 CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 DO NOT SCALE DRAWING DESCRIPTION: 2MM X 2MM TERMINAL STRIP ASSEMBLY FIG 4 DWG. NO. -ES (DIFFERENT AS SHOWN, TMMH-1XX-XX-XX-DV-XXX-TR-ASM OTHERWISE SAME AS FIG 1) F: DWG MISC MKTG TMMH-1XX-XX-XX-DV-XXX-TR-ASM-MKT.SLDDRW BY: PURVIS 10/08/1996 SHEET OF2 5