DO NOT
SCALE FROM
THIS PRINT
NOTES:
REVISION DK
C
1. REPRESENTS A CRITICAL DIMENSION.
TSM-1XX-XX-XXX-XX-X-XXX-X
2. MAXIMUM POST HEIGHT VARIATION: .005[0.13].
3. LOAD PARTS POS 1 IN SAME DIRECTION AS ARROW.
4. TUBE POSITIONS 03 THRU 50.
No OF POSITIONS
5. TAPE & REEL AVAILABLE ON POSITION 02 THRU 28 ONLY.
OPTION #3
-02 THRU -50
LEADS MAY NOT BE VISIBLE FOR CUSTOMER'S VISUAL
(NOT AVAILABLE WITH -TV & -TM MOUNT STYLES)
INSPECTION ON SMALLER POSITIONED PARTS WHEN USED
-P: PICK AND PLACE PAD
WITH THE -P OR -M OPTIONS.
(USE PPP-06, SEE FIG 4, SHT 2)
6. MEASURE AT BEND RADIUS. LEAD STYLE
(AVAILABLE ON POS -04 THRU -36, -50)
7. MINIMUM PUSHOUT FORCE: 3 LBS.
(SEE TABLE 1)
(AVAILABLE ON POS -02 & -03 WITH -TR
8. FOR -TV USE T-31724-01.
OPTION ONLY, SEE NOTE 5)
9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,
PLATING SPECIFICATION
THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. -M: METAL PICK AND PLACE PAD
*
-T: MATTE TIN ON ENTIRE PIN. * FOR EXISTING CUSTOMERS ONLY
SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL
-S: 30" SELECTIVE GOLD IN CONTACT AREA,
ASSEMBLIES WITH THE -LC OPTION. (USE LMP-01, SEE FIG 5, SHT 2)
10. ONLY AVAILABLE ON -01-DV OPTION, MATES ONLY WITH MATTE TIN ON TAIL.
(NOT RECOMMENDED WITH -T OR -TM PLATING)
SSM, SSW, SSQ, BCS, ESW AND ESQ. -G: 10" SELECTIVE GOLD IN CONTACT AREA,
(LEAD STYLES -01 & -04 ONLY)
11. MAXIMUM CUT FLASH: .005[0.13]
3" SELECTIVE GOLD ON TAIL.
(AVAILABLE ON POS 04 THRU 36)
12. THIS DIMENSION TO BE MEASURED RELATIVE TO DATUM -Z-. -L: 10" SELECTIVE GOLD IN CONTACT AREA,
(AVAILABLE ON POS 02 AND 03 WITH -TR
MATTE TIN ON TAIL.
OPTION ONLY, SEE NOTE 5)
-TL: TIN/LEAD (90/10) ON ENTIRE PIN.
-TR: TAPE AND REEL (SEE FIG 8, SHT 3)
-STL: 30" SELECTIVE GOLD IN CONTACT AREA,
(02 THRU 28 POS)
TIN/LEAD (90/10) ON TAIL.
OPTION #2
-F: 3" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
POLARIZED POSITION
-H: 30" SELECTIVE GOLD IN CONTACT AREA,
SPECIFY OMITTED PIN
3" SELECTIVE GOLD ON TAIL.
-TM: MATTE TIN ON ENTIRE PIN.
OPTION #1
-SM: 30" SELECTIVE GOLD IN CONTACT AREA,
(AVAILABLE FOR -DV MOUNT STYLE ONLY)
MATTE TIN ON TAIL.
-LC: LOCKING CLIP (SEE FIG 2, SHT 2)
-LM: 10" SELECTIVE GOLD IN CONTACT AREA,
(USE LC-05-TM)
MATTE TIN ON TAIL.
(-03 THRU -36 POS, USE 2 PER STRIP)
C
-FM: 3" SELECTIVE GOLD IN CONTACT AREA,
(-02 POS, USE 1 PER STRIP)
+.000[0.00]
MATTE TIN ON TAIL.
(NO OF POS x .100[2.54])
(USE RTSM-XX-DVU)
-.015[0.38]
-SS: 30" STRIPE SELECTIVE GOLD IN CONTACT AREA,
(SEE NOTE 9)
MATTE TIN ON TAIL. (SEE NOTE 10)
-A: ALIGNMENT PIN (SEE FIG 3, SHT 2)
(NO OF POS -1) x .100[2.54]
(FOR MOLDED TO POSITION, USE RTSM-XX-DVU-XX BODY)
C
RTSM-50-DVU (FOR STAKED, USE RTSM-50-DVU BODY, 5 POS MIN)
02
(LEAVE BLANK FOR NO HOLD DOWN OPTION)
C USE RTSM-50-DVU SEE FIG 1, CAN BE CUT TO POSITION) MAX .200 5.08
MOUNT STYLE
(SEE TABLE 1) REF
-DV: DOUBLE VERTICAL
-TV: TRIPLE VERTICAL (-02 THRU -30 ONLY)
*
(USE HTSW-50-T-LCP, SEE NOTE 8)
01 03
-TM: TRIPLE MIXED TECHNOLOGY (-02 THRU -30 ONLY)
2 MAX SWAY
(USE HTSW-50-T-LCP, AVAILABLE ON -01 LEAD STYLE ONLY)
5 MAX SWAY
(EITHER DIRECTION)
(EITHER DIRECTION)
* = FOR EXISTING CUSTOMERS ONLY
.100 2.54
.025 0.64 SQ
2 MAX SWAY
REF (TYP)
(EITHER DIRECTION)
C (SEE TABLE 1
(SEE TABLE 1 & NOTE 2)
& NOTE 2)
.100 2.54 REF 3 (SEE NOTE 12)
-Z-
SEE TABLE 5
.050.010 1.270.25 (TYP)
C
FIG 1 IN-PROCESS
5 (SEE NOTE 12) (SEE NOTE 6)
TSM-1XX-XX-XXX-DV SHOWN -DV MOUNT STYLE
PROPRIETARY NOTE
* *
UNLESS OTHERWISE SPECIFIED,
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
DIMENSIONS ARE IN INCHES.
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
TOLERANCES ARE:
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
DECIMALS ANGLES
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
.XX: .01 [.3] 2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
.XXX: .005 [.13]
PHONE: 812-944-6733 FAX: 812-948-5047
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
.XXXX: .0020 [.051]
e-Mail info@SAMTEC.com code 55322
WRITTEN CONSENT OF SAMTEC, INC.
MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1
DESCRIPTION:
INSULATOR: LCP, UL94VO, COLOR: BLACK
DOUBLE ROW GULLWING ASM
TERMINAL: PHOS BRONZE
DWG. NO.
TSM-1XX-XX-XXX-XX-X-XXX-X
SHEET OF
BY: BRYANT 04/24/1991 1 3
F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRWREVISION DK
(SEE TABLE 3)
.045 1.14
REF
.110 2.79
.063 1.60 REF
LC-05-TM
(NO OF POS -2) x .100[2.54]
.048 1.21 REF
(NO OF POS -2) x .100[2.54]
2 MAX SWAY
(EITHER DIRECTION)
2 MAX SWAY
FIG 2
FIG 3
(EITHER DIRECTION)
-LC: LOCKING CLIP
-A: ALIGNMENT PIN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) .020[0.51].020[0.51]
.164 4.17
.225 5.72 REF
.390 9.91
REF
.0790 2.007
.270 6.86.010[0.13]
REF
FIG 5
-M: METAL PICK AND PLACE PAD
FIG 4
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
-P: PICK AND PLACE PAD=((NO OF POS x .100[2.54]) - .225[5.72]) / 2
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
NOTE: = ((NO OF POS x .100[2.54]) - .390[9.91])/2
HAND FILL USE LMP-01
MACHINE FILL USE LMP-01
PROPRIETARY NOTE
* *
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
PHONE: 812-944-6733 FAX: 812-948-5047
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
e-Mail info@SAMTEC.com code 55322
WRITTEN CONSENT OF SAMTEC, INC.
DESCRIPTION:
DO NOT SCALE DRAWING
DOUBLE ROW GULLWING ASM
DWG. NO.
SHEET SCALE: 2:1
TSM-1XX-XX-XXX-XX-X-XXX-X
F:\DWG\MISC\MKTG\TSM-1XX-XX-XXX-XX-X-XXX-X-MKT.SLDDRW SHEET OF
BY: BRYANT 04/24/1991 2 3