TSM-105-01-T-DH-P Samtec

F-219 TSM11602SDVLC 10 YEAR MFG WITH 30 GOLD EXTENDED LIFE PRODUCT TSM12101TSV HIGH MATING CYCLES (2.54 mm) .100 SMT .025 SQ POST HEADER Board Mates: ROW NO. PINS LEAD PLATING SSW, SSQ, SSM, BSW, ESW, TSM 1 OPTION ESQ, BCS, SLW, CES, HLE PER ROW STYLE OPTION Cable Mates: IDSS, IDSD 02 thru 36 F = Gold flash on post, SPECIFICATIONS Matte Tin on tail For complete specifications and recommended PCB layouts .230 (5.84 mm) Post Height see www.samtec.com TSM = L 01 (Mates with SSW, BCS, SSM, IDSS, IDSD) = 10 (0.25 m) Gold on post, Insulator Material: Matte Tin on tail Black Liquid Crystal Polymer .320 (8.13 mm) Post Height Terminal Material: = 02 Post (Mates with SSM -DH) Phosphor Bronze Height S Plating: = 30 (0.76 m) Gold on post, Au or Sn over .420 (10.67 mm) Post Height Matte Tin on tail = 50 (1.27 m) Ni 03 (For Bottom Mount & Pass Through) Operating Temp Range: -55 C to +105 C with Tin -55 C to +125 C with Gold T .120 (3.05 mm) Post Height = 04 Voltage Rating: = Matte Tin (Mates with SLW, CES, HLE) 475 VAC -SV/-DV mated with BCS or SSM RoHS Compliant: Yes CURRENT RATING MATES (PER PIN) SV DV TSM/SSW 4.7 A = Single Row Vertical Pin = Double Row Vertical Pin TSM/SSM 5.4 A TSM/HLE 4.1 A (2.54) .100 x No. of positions 36 2 PINS POWERED (2.54) .100 (1.14) (2.54) 01 PROCESSING .045 .100 (0.64) REF .025 LeadFree Solderable: Yes SQ -DH/-SH Lead Coplanarity: Post Height (0.15 mm) .006 max (02-36)* -DV/-SV Lead Coplanarity: (2.54) (3.81) (0.10 mm) .004 max (02-05) .100 .150 (0.13 mm) .005 max (06-10)* (0.15 mm) .006 max (11-36)* *(.004 stencil solution APPLICATIONS may be available contact IPG samtec.com) SSM TSM SH DH RECOGNITIONS = Single Row = Double Row Horizontal Pin Horizontal Pin (Style 01, 02 or 03 only) For complete scope of recognitions see HORIZONTAL www.samtec.com/quality (2.54) .100 x No. of positions (1.78) (1.40) .070 36 01 FILE NO. E111594 .055 (3.05) .120 ALSO AVAILABLE Optional Alignment Pin (A) (1.58) (MOQ Required) .062 (No. of positions x (2.54) .100) (5.08) .200 DIA Edge Mount and (2) (0.64) Locking Clips for SV .025 SQ Solder Locks for DH and Post Shrouds for DV Height Other platings (2.54) (2.03) .100 .080 01= (4.57) .180 Note: Some lengths, 02, 03, 04 = (4.82) .190 styles and options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.TSM11501TSHA TSM11001TDV TSM12602LDHK TSM SERIES SMT .025 SQ POST HEADER OTHER OPTIONS (4.06) A K TR P .160 = Alignment Pin = Tape & Reel Packaging = (6.50 mm) .256 DIA = Plastic Pick & Place Pad metal or plastic Polyimide Film SV = 02-22 positions (DV: 4 positions minimum (6.86) at Samtec discretion Pick & Place Pad .270 without TR 2 & 3 positions DV = 02-28 positions (Not available (SH: 4 positions available with TR) SH = 02-30 positions with TM or MT) minimum without TR (SH: 4 positions (02 positions min.) DH = 02-29 positions 2 & 3 positions minimum without TR (Not available with LC) available with TR) Not available with MT or TM 2 & 3 positions SV (DH: 4 positions available with TR) LC minimum (DH: 5 positions (13.27) = Locking Clip without TR) .050 (6.35) minimum without TR) (Not available with TM) .250 (3 positions min.) (SV: 4 positions (Not available with A) minimum without TR XXX (Manual placement 2 & 3 positions = Polarized SH & DH required) available with TR) Position DV TM = Double Row Vertical Pin = Triple Row Vertical Mixed Technology (Style 01 only) (2.54) .100 x No. of positions 02 02 thru 30 positions only 72 (2.54) (5.08) (2.54) .100 X No. of positions .100 .200 03 90 (1.14) .045 71 REF 01 (2.54) .100 (0.64) .025 SQ Post (2.54) Height .100 (7.62) Post .300 Height (2.54) 01 88 (3.56) (3.81) .100 (2.54) .100 .140 .150 (0.64) .025 SQ (2.54) (2.79) (11.43) .100 .110 .450 (1.58) .062 DIA (No. of positions -2) x (2.54) .100) A Option LC Option DH MT = Double Row Horizontal Pin = Mixed Technology Pin (Style 01, 02 or 03 only) (Style 01, 02 or 03 only) (2.54) .100 x No. of positions (2.54) .100 x No. of positions Optional 02 72 Alignment 02 72 Pin (A) (2.54) (6.10) (2.54) (6.10) .100 .240 .100 .240 71 01 (1.58) 71 01 .062 DIA(2) (1.78) (1.78) .070 (No. of positions x (1.40) .070 (2.54) .100) (5.08) .200 .055 (2.54) (0.64) (2.54) .100 (0.64) .025 .100 .025 (2.54) Post .100 Post Height Height (1.52) .060 (2.54) (2.54) .100 .100 (3.68) .145 (7.87) (7.87) .310 .310 (1.16) .046 (1.16) .046 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.