TSM-107-01-H-DV-003-P-TR Samtec

F-219 (Rev 26MAY20) TSM11602SDVLC 10 YEAR MFG WITH 30 GOLD EXTENDED LIFE PRODUCT TSM12101TSV HIGH MATING CYCLES (2.54 mm) .100 SMT .025 SQ POST HEADER Board Mates: ROW NO. PINS PLATING SSW, SSQ, SSM, BSW, ESW, TSM 1 LEAD STYLE OPTION ESQ, BCS, SLW, CES, HLE PER ROW OPTION Cable Mates: IDSS, IDSD 02 thru 36 APPLICATIONS SPECIFICATIONS 01 = .230 (5.84 mm) Post Height TSM SSM For complete specifications (Mates with SSW, BCS, SSM, IDSS, IDSD) and recommended PCB layouts Gold flash on post, see www.samtec.com TSM = F 02 Matte Tin on tail Insulator Material: = .320 (8.13 mm) Post Height Black Liquid Crystal Polymer (Mates with SSM -DH) 10 (0.25 m) HORIZONTAL Terminal Material: = Gold on post, Phosphor Bronze L Matte Tin on tail Plating: 03 Au or Sn over = .420 (10.67 mm) Post Height 50 (1.27 m) Ni HIGH-SPEED CHANNEL PERFORMANCE 30 (0.76 m) (For Bottom Mount & Pass Through) Operating Temp Range: = Gold on post, S Rating based on Samtec reference -55 C to +105 C with Tin Matte Tin on tail channel. For full SI performance data -55 C to +125 C with Gold 04 8 visit Samtec.com or contact Voltage Rating: =.120 (3.05 mm) Post Height Gbps SIG samtec.com = 475 VAC -SV/-DV mated with Matte Tin (Mates with SLW, CES, HLE) T BCS or SSM RoHS Compliant: Yes CURRENT RATING MATES (PER PIN) SV DV TSM/SSW 4.7 A = Single Row Vertical Pin = Double Row Vertical Pin TSM/SSM 5.4 A TSM/HLE 4.1 A (2.54) .100 x No. of positions 36 2 PINS POWERED (2.54) .100 (1.14) PROCESSING (2.54) 01 .045 .100 (0.64) REF .025 LeadFree Solderable: Yes SQ -DH/-SH Lead Coplanarity: Post (0.15 mm) .006 max (02-36)* Height -DV/-SV Lead Coplanarity: (2.54) (0.10 mm) .004 max (02-05) (3.81) .100 .150 (0.13 mm) .005 max (06-10)* (0.15 mm) .006 max (11-36)* *(.004 stencil solution may be available contact IPG samtec.com) SH DH RECOGNITIONS = Single Row = Double Row Horizontal Pin Horizontal Pin (Style 01, 02 or 03 only) For complete scope of recognitions see www.samtec.com/quality (2.54) .100 x No. of positions (1.78) (1.40) .070 36 01 FILE NO. E111594 .055 (3.05) .120 ALSO AVAILABLE Optional Alignment Pin (A) (1.58) (MOQ Required) .062 (No. of positions x (2.54) .100) (5.08) .200 DIA (2) Edge Mount and (0.64) .025 Locking Clips for SV SQ Solder Locks for DH and Post Height Shrouds for DV Other platings (2.54) (2.03) .100 .080 Note: 01= (4.57) .180 Some lengths, styles and 02, 03, 04 = (4.82) .190 options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.TSM11501TSHA TSM11001TDV TSM12602LDHK TSM SERIES SMT .025 SQ POST HEADER OTHER OPTIONS (4.06) A K P .160 TR = Alignment Pin = (6.50 mm) .256 DIA = Plastic Pick & Place Pad = Tape & Reel Packaging metal or plastic Polyimide Film (DV: 4 positions minimum (6.86) SV: 02-22 positions, DV:02-28 positions, at Samtec discretion Pick & Place Pad .270 without TR 2 & 3 positions (Not available SH: 02-30 positions, DH: 02-29 positions (SH: 4 positions available with TR) with TM or MT) (Not available with MT or TM) minimum without TR (SH: 4 positions (02 positions min.) 2 & 3 positions minimum without TR (Not available with LC) available with TR) 2 & 3 positions SV (DH: 4 positions available with TR) FR LC minimum = Full Reel Tape & Reel (DH: 5 positions (13.27) = Locking Clip without TR) .050 (must order maximum quantity per reel (6.35) minimum without TR) (Not available with TM) .250 contact Samtec for quantity breaks) (3 positions min.) (SV: 4 positions SV: 02-22 positions, DV:02-28 positions, (Not available with A) minimum without TR XXX SH: 02-30 positions, DH: 02-29 positions (Manual placement 2 & 3 positions = Polarized (Not available with MT or TM) SH & DH required) available with TR) Position DV TM = Double Row Vertical Pin = Triple Row Vertical Mixed Technology (Style 01 only) (2.54) .100 x No. of positions 02 02 thru 30 positions only 72 (2.54) (5.08) (2.54) .100 X No. of positions .100 .200 03 90 (1.14) .045 71 REF 01 (2.54) .100 (0.64) .025 SQ Post (2.54) Height .100 (7.62) Post .300 Height (2.54) 01 88 (3.81) (3.81) .100 (2.54) .100 .150 .150 (0.64) .025 SQ (2.54) (2.79) (11.43) .100 .110 .450 (1.58) .062 DIA (No. of positions -2) x (2.54) .100) A Option LC Option DH MT = Double Row Horizontal Pin = Mixed Technology Pin (Style 01, 02 or 03 only) (Style 01, 02 or 03 only) (2.54) .100 x No. of positions (2.54) .100 x No. of positions Optional 02 72 Alignment 02 72 Pin (A) (2.54) (6.10) (2.54) (6.10) .100 .240 .100 .240 71 01 (1.58) 71 01 .062 DIA(2) (1.78) (1.78) .070 (No. of positions x (1.40) .070 (2.54) .100) (5.08) .200 .055 (2.54) (0.64) (2.54) .100 (0.64) .025 .100 .025 (2.54) Post .100 Post Height Height (1.52) .060 (2.54) (2.54) .100 .100 (3.68) .145 (7.87) (7.87) .310 .310 (1.16) .046 (1.16) .046 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.