TSM-107-01-L-DV-TR Samtec

SURFACE MOUNT .025 SQ POST HEADER 8 Gbps (2.54 mm) .100 PITCH TSM SERIES TSM NO. PINS PER ROW LEAD STYLE TSM 1 Board Mates: - - - SSW, SSQ, SSM, BSW, ESW, ESQ, BCS, SLW, CES, HLE Cable Mates: Specify 02 thru 36 IDSS, IDSD LEAD STYLE from chart SPECIFICATIONS Insulator Material: Black Liquid Crystal Polymer (2.54) .100 x No. of positions Terminal Material: Phosphor Bronze (2.54) Plating: .100 Au or Sn over 50 (1.27 m) Ni Operating Temp Range: -55 C to +105 C with Tin -55 C to +125 C with Gold Post Voltage Rating: Height 475 VAC -SV/-DV mated with (2.54) BCS or SSM (3.81) .100 .150 LEAD POST MATES PROCESSING STYLE HEIGHT WITH SV Row Option (5.84) SSW, BCS, LeadFree Solderable: 01 .230 SSM, IDSS, IDSD Yes -DH/-SH/-SV Lead Coplanarity: (8.13) 02 SSM -DH (0.15 mm) .006 max (02-36)* .320 -DV Lead Coplanarity: (0.10 mm) .004 max (02-05) (10.67) Bottom Mount & 03 (2.54) .100 x No. of positions (0.13 mm) .005 max (06-10)* .420 Pass Through (0.15 mm) .006 max (11-36)* (3.05) (3.05) *(.004 stencil solution 04 SLW, CES, HLE .120 .120 may be available contact ipg samtec.com) (No. of positions x (2.54) .100) (5.08) .200 CURRENT RATING MATES (PER PIN) Post 4.7 A TSM/SSW Height 5.4 A TSM/SSM (2.54) .100 TSM/HLE 4.1 A 2 POSITIONS POWERED 01= (4.57) .180 02, 03, 04 = (4.82) .190 SH Row Option (2.54) .100 x No. of positions (5.08) .200 Post Height (2.54) (3.81) .100 .150 (No. of positions -2) x (2.54) .100) Note: Some lengths, styles and DV Row Option options are non-standard, non-returnable. F-221 (Rev 15SEP21) samtec.com TSM Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.PLATING OPTION ROW OPTION OTHER OPTIONS - - - F SV XXX = Gold flash on post, Matte Tin on tail = Single Row Vertical Pin = Polarized Position L DV A = 10 (0.25 m) Gold on post, = Double Row Vertical Pin = Alignment Pin Matte Tin on tail metal or plastic at Samtec discretion (Not available with TM or MT) SH (02 positions minimum) S = Single Row Horizontal Pin (Not available with LC) = 30 (0.76 m) Gold on post, Matte Tin on tail DH LC = Double Row Horizontal Pin = Locking Clip T (Style 01, 02 or 03 only) (Not available with TM) = Matte Tin (3 positions minimum) TM (Not available with A) = Triple Row Vertical Mixed Technology (Manual placement required) (Style 01 only) (02 thru 30 positions only) K = (6.50 mm) .256 DIA MT Polyimide Film Pick & Place Pad = Mixed Technology Pin (SH: 4 positions minimum without TR (Style 01, 02 or 03 only) 2 & 3 positions available with TR) (DH: 4 positions minimum without TR) (2.54) .100 x No. of positions P = Plastic Pick & Place Pad (6.10) .240 (DV: 4 positions minimum without TR 2 & 3 positions available with TR) (SH: 4 positions minimum without TR (No. of positions x 2 & 3 positions available with TR) (2.54) .100) (5.08) .200 (DH: 5 positions minimum without TR) (SV: 4 positions minimum without TR 2 & 3 positions available with TR) Post Height TR = Tape & Reel (2.54) SV: 02-22 positions, DV: 02-28 positions, .100 (3.68) SH: 02-30 positions, DH: 02-29 positions .145 (Not available with MT or TM) (7.87) .310 FR (1.16) .046 = Full Reel Tape & Reel (must order maximum quantity per reel DH Row Option contact Samtec for quantity breaks) SV: 02-22 positions, DV: 02-28 positions, SH: 02-30 positions, DH: 02-29 positions (Not available with MT or TM) (2.54) .100 x No. of positions (2.54) .100 x No. of positions (6.10) (7.62) .240 .300 Post Post Height Height (1.52) (2.54) .060 (2.54) .100 .100 (7.87) .310 TM Row Option (1.16) .046 MT Row Option F-221 (Rev 15SEP21) samtec.com TSM Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.