SHROUDED .025 SQ POST IDC HEADERS (2.54 mm) .100 PITCH TST/HTST/ZST SERIES TST/HTST/ZST NO. PINS LEAD PLATING ROW OTHER SERIES 1 Mates: - PER ROW - STYLE - OPTION - OPTION - OPTION IDSD, HCSD Surface Mount Specify TST 05, 07, 08, 10, F D SPECIFICATIONS (lead style LEAD = Cable Strip = Gold flash = Double Row 12, 13, 15, 17, 01 only) STYLE on post, Through-hole Insulator Material: (HTST only) 20, 25, 32, 36 Matte Tin (lead style 01, from HTST TST, ZST=Black Glass (Standard sizes) on tail 02 & 03 only) = High Temp chart Filled Polyester P (Not available Cable Strip HTST=Natural LCP = Pick & on DV) DV Insulation Resistance: Place Pad = Double Row 5000 M min L Surface Mount Terminal Material: THROUGH- TR = 10 (lead style Phosphor Bronze LEAD HOLE = Tape & Reel (0.25 m) 01 only) Plating: STYLE (A) Gold on post, (HTST only) Au or Sn over (2.54) .100 x No. of Positions + (7.62) .300 Matte Tin 50 (1.27 m) Ni FR 01 (2.92) .115 on tail Current Rating (IDSD/TST): = Full Reel DRA (2.54) .100 x No. of Positions + (5.08) .200 3.4 A per pin 02 (4.19) .165 Tape & Reel = Double Row (2 pins powered) (must order max. T Right-angle 03 (14.35) .565 Operating Temp Range: quantity per reel = Matte Tin (lead style 04 -55 C to +125 C with Gold contact Samtec & 05 only) -55 C to +105 C with Tin for quantity (9.27) Voltage Rating:: breaks) .365 425 VAC/600 VDC PROCESSING D DV DRA LeadFree Solderable: B HTST=Yes TST, ZST= No, Lead Wave only RIGHT- (8.89) (10.16) LEAD SMT Lead Coplanarity: ANGLE .350 .400 STYLE (0.10 mm) .004 max (05-15) (B) (0.15 mm) .006 max (17-36)* A 04 (3.30) .130 *(.004 stencil solution (11.18) .440 may be available contact D 05 (5.84) .230 DV DRA ipg samtec.com) (HTST ONLY) NO. PINS LEAD PLATING BODY ZST 1 D - - - - - PER ROW STYLE OPTION HEIGHT ALSO AVAILABLE MOQ Required Other platings & sizes Specify 05, 07, 08, 10, F XXXX Alignment Pins LEAD = Gold flash on post, = Body Height 12, 13, 15, 17, STYLE Matte Tin on tail Single Row 20, 25, 32, 36 from Locking Leads (Standard sizes) chart L LEAD C MAX BODY Polarized = 10 (0.25 m) STYLE (OAL) HEIGHT Gold on post, Matte Tin on tail 01 (16.00) .630 (13.72) .540 (2.54) .100 x No. of Positions + (7.62) .300 02 (18.54) .730 (16.26) .640 T (2.54) .100 x No. of Positions + (5.08) .200 = Matte Tin 03 (21.08) .830 (18.80) .740 04 (23.62) .930 (21.34) .840 (9.27) .365 05 (26.16) 1.030 (23.88) .940 06 (28.70) 1.130 (26.42) 1.040 07 (31.24) 1.230 (28.96) 1.140 08 (33.78) 1.330 (31.50) 1.240 (8.89) BODY 09 (36.32) 1.430 34.04) 1.340 .350 HEIGHT (2.29) C .090 Note: (OAL) MIN For added mechanical stability, Samtec Note: recommends mechanical board spacers Some lengths, styles and be used in applications with gold or (2.54) options are non-standard, selective gold plated connectors. Contact .100 non-returnable. ZST is ipg samtec.com for more information. non-standard, non-returnable. F-221 (Rev 01Mar21) samtec.com TST, samtec.com HTST or samtec.com ZST Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Headers & Wire Housings category: Click to view products by Samtec manufacturer: Other Similar products are found below : 892-18-020-10-001101 58102-G61-06LF 582553-1 0009485154 009176003701906 0050291907 LY20-4P-DT1-P1E-BR 02.125.8002.8 609-3404 61062-3 61082-181009 622-3653LF 63453-116 636-1030 636-1427 636-3427 636-4007 641938-9 641991-4 644827-2 65817- 010LF 65817-015LF 65863-015LF 66207-023LF 67095-007LF 67601157 68645-018 68648-049 70.362.1628.0 70-4210 70-4226B 70- 4853B 707-5020 707-5028 71.350.2428.0 71918-208LF 71961-016LF 733-134 733-162 754199-000 760-3052 79531-3000 FCN- 360C032-B FCN-367T-T012/H FCN-723D010/2 80.063.4001.1 800-90-001-10-001000 800-90-010-10-002000 801-43-002-10-013000 801-43-006-10-002000