TSW-107-08-G-T-NA Samtec

F-215 (Rev 22DEC15) HTSW11611GS TSW20909FSRA HTSW11505LQ (2.54 mm) .100 THROUGH-HOLE .025 SQ POST HEADER Mates with: NO. PINS SSW, SSQ, SSM, ESW, ESQ, TYPE STRIP PIN CENTERS PER ROW BCS, BSW, CES, SLW, IDSD, IDSS, SMSD, SMSS SPECIFICATIONS .100 (2.54 mm) Centers, .200 (5.08 mm) Centers, Standard = = = 2 1 All Positions Filled Every Other Position Filled TSW Strip For complete speci cations see www.samtec.com TSW (2.54) (5.08) or www.samtec.com HTSW .100 .200 Hi-Temp = Insulator Material: HTSW Strip TSW: Black Glass Filled Polyester HTSW: Natural Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: (2.54) .100 x No. of Positions Au or Sn over 50 (1.27 m) Ni (2.54) .100 Operating Temp Range: Straight (2.54) (2.48) S .100 .098 -55 C to +125 C with Gold Pin (2.54) 01 -55 C to +105 C with Tin 50 .100 Voltage Rating: 02 100 Versions 550 VAC mated with SSW 500 VAC mated with (5.08) (2.54) (5.02) .200 .100 .198 D BCS or ESQ 450 VAC -RA/-RE mated with 01 99 BCS or SSM 03 150 400 VAC mated with CES RoHS Compliant: Yes (2.54) LeadFree Solderable: .100 (7.62) (5.08) (7.56) HTSW: Yes .300 .200 .298 T TSW: No, Lead Wave Only CURRENT RATING 01 148 (PER PIN) 03 150 TSW mated with 01 ESW SSW SLW SSQ SSM BCS SNT (7.62) (5.08) (7.56) .200 .298 .300 thru Q 5.2 A 5.7 A 5.2 A 6.3 A 5.2 A 4.6 A 4.3 A 50 1 POSITION POWERED PER ROW 01 148 = .100 (2.54 mm) TSW HTSW Center Version RECOGNITIONS Right (2.54) .100 x No. of Positions (2.54) .100 For complete scope Angle (3.02) (3.09) (1.78) S of recognitions see (1.78) .119 .122 Versions .070 .070 www.samtec.com/quality 01 02 100 02 APPLICATIONS thru FILE NO: 090871 0 000 50 (2.54) (6.10) (5.56) D .100 .240 .219 BCS TSW 25 (1.78) (1.78) = .200 (5.08 mm) .070 .070 01 99 Center Version 03 150 (2.54) HORIZONTAL .100 (5.08) (8.12) (8.10) T .200 .320 .319 (1.78) (1.78) .070 .070 ALSO AVAILABLE 01 148 (MOQ Required) 03 150 Other platings (5.08) Contact Samtec. (8.12) (8.10) Q .200 .320 .319 (1.78) (1.78) .070 .070 01 148 TSW HTSW Note: Some lengths, styles and options are non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.TSW10910FDRA TSW11416GSRE HTSW12013TD TSW11207GT TSW, HTSW SERIES LEAD PLATING ROW OTHER OPTIONS STYLE OPTION OPTION S F LC RA or RE = Single = Gold ash on post, Matte Tin on tail = Locking Clip = Right Angle Row (Styles 08 thru 13 & 22 only) L NA D = 10 (0.25 m) Gold on post, Matte Tin on tail IDSS or IDSD = Right Angle STRIP ASSEMBLY = Double (using straight body for coplanar Row LOCKING .025 SQ CLIP mating with SSW-RA series) TERMINAL G STRIP (TSW) PC = 10 (0.25 m) Gold on post, Gold ash on balance BOARD T Requires 4 pin minimum = Triple (1.27) (NA with -T,-Q,-RA or -RE) T Row .050 = Matte Tin LA LL Q = RA Option = Double = Locking Lead OTHER SOLUTIONS with LL Option Row Two leads per strip crimped in (5.08 mm) Elevated Right Angle option opposite directions on or near centerline. See charts for available .200 Shunts styles. N/A with single row 1 or 2 XXX row positions. Recommended hole size = Polarized Position Contact Samtec space (1.02 mm 0.03 mm) .040 .001 Straight Pin Versions Right Angle Versions (Specify LEAD STYLE from chart) (Specify LEAD STYLE from chart and select RA or RE from other options) STYLE A B C STYLE A B C SINGLE ( S) RE LEAD SINGLE RA LEAD DOUBLE ( D) TRIPLE (T & Q) C STYLE A STYLE (3.30) (8.51) (2.67) (23.62) (18.29) A C A A 18 05 .130 .335 .105 .930 .720 (2.29) (2.29) (2.29) * * (4.83) 08 09 (2.41) (2.67) (26.16) (20.83) (7.62) .090 .090 .090 19 .190 06 .095 .105 (2.79) 1.030 .820 .300 (7.37) (7.37) (7.37) * * (7.37) .110 09 10 (31.24) (25.91) (2.54) (10.92) .290 .290 .290 20 .290 07 1.230 1.020 .100 .430 (9.91) (9.91) (9.91) (5.84) * * (9.91) 10 11 (36.32) (30.99) (5.84) (5.08) (13.46) .390 .390 .390 .230 21 .390 08 1.430 1.220 .230 .200 .530 (12.45) (12.45) (12.45) * * (12.45) 11 12 (7.62) (16.00) (10.16) (18.54) .490 .490 .490 22 .490 09 .300 .630 .400 .730 (5.84) (14.99) (14.99) (14.99) * (17.53) 12 13 (11.30) .230 (12.70) (21.08) .590 .590 .590 (5.84) 23 .690 10 .445 .500 .830 .230 (2.92) (20.07) (20.07) * (2.54) (8.13) 13 N/A 16 (12.15) (6.73) (15.24) (23.62) .115 .790 .790 24 .100 .320 11 .480 .265 .600 .930 (5.08) (8.13) (5.08) (5.08) * (22.61) 16 21 (17.78) (5.33) (16.00) (8.13) (26.16) .200 .320 .200 .200 25 .890 12 * .700 .210 .630 .320 1.030 * (25.15) (2.29) 21 N/A N/A 22 (22.86) (31.24) (3.20) (11.58) (5.84) (5.84) .990 26 .090 13 .900 1.230 .126 .456 .230 .230 (4.83) (4.83) (4.83) (20.07) 22 27 (13.46) (8.13) (25.40) (33.78) (5.84) .190 .190 27 .190 .790 14 * (2.79) .530 .320 1.000 1.330 .230 (2.54) (8.13) (2.54) (2.54) (14.99) .110 25 28 (13.21) (20.32) (28.70) .100 .320 .100 .100 28 .590 15 * (18.54) .520 .800 1.130 (22.61) * .730 27 N/A (7.87) (8.13) (23.11) (33.78) *Available with LA .890 (5.84) 16 29 .310 .320 .910 1.330 (8.13) (17.53) .230 (17.53) (Locking Lead) Option * 28 (18.03) (28.70) .320 (2.79) (21.08) (15.74) .690 .690 17 30 N/A .710 1.130 .110 .830 .620 (20.32) * 29 (0.89) (9.27) (5.84) N/A .800 (8.13) 41 * Available with LL + .035 .365 .230 .320 (15.24) (15.24) 30 (1.27) (11.94) (8.13) (Locking Lead) Option .600 .600 42 + .050 .470 .320 (0.64) .025 SQ Post + Style 41 & 42 available (1.78) with HTSW only070 C C C Except: Style 26 A A (0.46) .018 DIA Tail B (2.54) (2.54) LEAD .100 .100 B STYLE B (2.54) (1.52) A RA .060 .100 (2.54) (0.64) .025 SQ Tail (4.06) RE .100 .160 Specify -07 for best mate with IDXX Series IDC Cable WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.