TSW-110-08-F-T-NA Samtec

THROUGH-HOLE .025 SQ POST HEADER (2.54 mm) .100 PITCH TSW/HTSW SERIES TSW/HTSW PIN CENTERS NO. PINS PER ROW LEAD STYLE SERIES Board Mates: - - - - SSW, SSQ, SSM, ESW, ESQ, BCS, BSW, CES, SLW Cable Mates: Specify TSW 1 01 thru 50 IDSD, IDSS LEAD STYLE = Standard Strip = .100 (2.54 mm) Centers, = .100 (2.54 mm) (All positions filled) Center Version from chart HTSW SPECIFICATIONS = Hi-Temp Strip 2 02 thru 25 = .200 (5.08 mm) Centers, = .200 (5.08 mm) Insulator Material: (Every other position filled) Center Version TSW: PBT HTSW: Natural LCP Terminal Material: Phosphor Bronze (2.54) .100 x No. of Positions A Plating: Au or Sn over 50 (1.27 m) Ni (2.54) (2.48) S .100 .098 Operating Temp Range: C B -55 C to +125 C with Gold -55 C to +105 C with Tin A Voltage Rating: 550 VAC mated with SSW (5.08) 500 VAC mated with (5.02) D .200 .198 BCS or ESQ 450 VAC -RA/-RE mated with C B BCS or SSM 400 VAC mated with CES A LeadFree Solderable: HTSW: Yes TSW: No, Lead Wave Only (7.56) (7.62) T .298 .300 CURRENT RATING (PER PIN) C B TSW mated with A ESW SSW SLW SSQ SSM BCS SNT 5.2 A 5.7 A 5.2 A 6.3 A 5.2 A 4.6 A 4.3 A (7.62) (7.56) Q .298 .300 2 POSITIONS POWERED C B TSW HTSW ALSO AVAILABLE Straight Pin Versions Other Platings (MOQ Required) STRAIGHT PIN VERSIONS STRAIGHT PIN VERSIONS LEAD LEAD A B C A B C STYLE STYLE OTHER SOLUTIONS *19 (26.16) 1.030 (20.83) .820 *05 (8.51) .335 (3.30) .130 (2.67) .105 (2.79) .110 Elevated Right-angle option * 06 (7.62) .300 (2.41) .095 (2.67) .105 * 20 (31.24) 1.230 (25.91) 1.020 Shunts * 07 (10.92) .430 (2.54) .100 * 21 (36.32) 1.430 (2.79) .110 (30.99) 1.220 * 08 (13.46) .530 (5.08) .200 * 22 (16.00) .630 (7.62) .300 (5.84) .230 09 (18.54) .730 (10.16) .400 * 23 (11.30) .445 (2.92) .115 10 (21.08) .830 (12.70) .500 (5.84) .230 * 24 (12.15) .480 (6.73) .265 11 (23.62) .930 (15.24) .600 * 25 (16.00) .630 (5.33) .210 (8.13) .320 12 (26.16) 1.030 (17.78) .700 26 (11.58) .456 (3.20) .126 13 (31.24) 1.230 (22.86) .900 27 (33.78) 1.330 (25.40) 1.000 (5.84) .230 14 (13.46) .530 (8.13) .320 28 (28.70) 1.130 (20.32) .800 (2.79) .110 *15 (13.21) .520 29 (33.78) 1.330 (23.11) .910 (8.13) .320 (18.54) .730 30 (28.70) 1.130 (18.03) .710 *16 (7.87) .310 (8.13) .320 *17 (21.08) .830 (15.74) .620 + 41 (9.27) .365 (0.89) .035 (5.84) .230 (2.79) .110 *18 (23.62) .930 (18.29) .720 + 42 (11.94) .470 (1.27) .050 (8.13) .320 * Available with LL (Locking Lead) Option Style 41 & 42 available with HTSW only. Note: + Specify -07 for best mate with IDXX Series IDC Cable Except: Style 26 (0.46) .018 DIA Tail Some lengths, styles and options are non-standard, non-returnable. F-221 samtec.com TSW or samtec.com HTSW Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.PLATING OPTION ROW OPTION OTHER OPTION - - - F S RA or RE = Gold flash on post, Matte Tin on tail = Single Row = Right-angle L D NA = 10 (0.25 m) Gold on post, Matte Tin on tail = Double Row = Right-angle (Using straight body for coplanar mating with SSW-RA series) G T = 10 (0.25 m) Gold on post, Gold flash on balance = Triple Row LL = Locking Lead T Q See charts for available styles. = Matte Tin = Double Row Not available with single row (5.08 mm).200 row space 1 or 2 positions. Recommended hole size (2.54) .100 x No. of Positions C D (1.02 mm 0.03 mm) .040 .001) (3.02) (3.09) S .119 .122 LC = Locking Clip (Styles 08 thru 13 & 22 only) E (Requires 4 pin minimum) (Not available with T, Q, RA orRE) C LA (6.10) = RA Option with LL Option (5.56) D .240 .219 XXX = Polarized Position E C (8.12) (8.10) T .320 .319 E C (8.12) (8.10) Q .320 .319 RIGHT-ANGLE VERSIONS DOUBLE TRIPLE SINGLE (S) -RA (D) (T & Q) LEAD C E STYLE TSW HTSW E E E 08 (2.29) .090 (2.29) .090 (2.29) .090 Right-Angle Versions 09 (7.37) .290 (7.37) .290 (7.37) .290 10 (9.91) .390 (9.91) .390 (9.91) .390 (5.84) .230 11 (12.45) .490 (12.45) .490 (12.45) .490 RIGHT-ANGLE VERSIONS LEAD D 12 (14.99) .590 (14.99) .590 (14.99) .590 STYLE -RE SINGLE 13 (20.07) .790 (20.07) .790 N/A RA (1.52) .060 LEAD C E STYLE *16 (8.13) .320 (5.08) .200 (5.08) .200 (5.08) .200 RE (4.06) .160 09 (4.83) .190 21 (25.15) .990 N/A N/A 10 (7.37) .290 (5.84) .230 * 22 (4.83) .190 (4.83) .190 (4.83) .190 11 (5.84) .230 (9.91) .390 12 (12.45) .490 * 25 (8.13) .320 (2.54) .100 (2.54) .100 (2.54) .100 13 (17.53) .690 27 (22.61) .890 N/A 16 (8.13) .320 (2.54) .100 (5.84) .230 28 (17.53) .690 (17.53) .690 21 (22.61) .890 N/A 29 (20.32) .800 N/A 22 (2.29) .090 (5.84) .230 (8.13) .320 27 (20.07) .790 30 (15.24) .600 (15.24) .600 28 (14.99) .590 * Available with LA (Locking Lead) Option F-221 samtec.com TSW or samtec.com HTSW Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.