ULTRA MICRO POWER SYSTEM (2.00 mm) .0787 PITCH UMPT/UMPS compared to another small form factor power solution Terminals shown actual size at 4 positions FEATURES & BENEFITS mPower Up to 18 A per blade (1 blade powered) Design flexibility as a power-only system or a two-piece system for power/signal applications Traditional Power Solutions Use with Samtecs high-speed connector systems for a unique power/signal system (see chart page 197) Choice of 2 to 10 positions CREEPAGE & CLEARANCE 5 mm to 12 mm stack heights available (up to 20 mm in development) UMPT/UMPS Tin or 10 Gold plated power blades 30 Gold plating available to meet specific regulations CREEPAGE 2.20 mm Optional weld tabs CLEARANCE 1.65 mm Cable-to-board and cable-to-cable systems in development Selectively loading contacts achieves customer specific creepage and clearance requirements. KEY SPECIFICATIONS STACK INSULATOR CONTACT VOLTAGE LEAD-FREE PITCH PLATING OPERATING TEMP RANGE HEIGHTS MATERIAL MATERIAL RATING SOLDERABLE -55 C to +105 C with Tin 5, 6, 7, 8 Sn or Au over 460 VAC/ 2.00 mm Black LCP Copper Alloy Yes and 10 mm 50 (1.27 m) Ni 650 VDC -55 C to +125 C with Gold F-221 (Rev 21MAY21) samtec.com/mPOWER Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.MAX 18 Amps ULTRA MICRO POWER TERMINAL NO. OF LEAD PLATING WELD LATCH UMPT V S XR - POSITIONS - STYLE - OPTION - - - TAB - OPTION - (Leave blank (Leave blank 02, 01.5 L TR for no for no latch) = (01.5 mm) .059 = 10 (0.25 m) = Tape & Reel 03, 04, weld tab) (Only available on Gold on contact, 02.5 lead style) 05, 06, Matte Tin on tail 02.5 FR (Weld tab W 07, 08, = (02.5 mm) .098 = Full Reel required) = Weld Tab S Tape & Reel 09, 10 UMPT Through-hole = 30 (0.76 m) (must order 06.5 P Board Mates: Gold on contact, max. quantity = (06.5 mm) .256 = Plastic Gold flash on tail per reel UMPS top latch contact Cable Mates: 07.5 Samtec T = (07.5 mm) .295 UMPC* M for quantity = Matte Tin = Metal (*UMPT requires -P or breaks) 12.5 side latches -M option for mating) = (12.5 mm) .492 A B A B NO. OF A POSITIONS (P & No latch) (M latch) 02 (11.30) .445 (9.70) .382 (13.30) .524 (11.60) .457 LEAD C STYLE (7.60) 03 (13.30) .524 (11.70) .460 (15.30) .602 (13.60) .535 .299 (4.80) 01.5 04 (15.30) .602 (13.70) .539 (17.30) .681 ( 1 5 . 60) .614 .189 (5.80) 05 (17.30) .681 (15.70) .618 (19.30) .760 (17.60) .693 02.5 .228 06 (19.30) .760 (17.70) .697 (21.30) .839 (19.60) .772 (9.55) 06.5 .376 07 (21.30) .839 (19.70) .776 (23.30) .917 (21.60) .850 C (10.80) 07.5 08 (23.30) .917 (21.70) .854 (25.30) .996 (23.60) .929 .425 09 (25.30) .996 (23.70) .933 (27.30) 1.075( 25.60) 1.007 (15.80) B 12.5 Note: .622 10 (27.30) 1.075 (25.70) 1.012 (29.30) 1.154( 27.60) 1.087 UMPT0401.5X-VSW SHOWN Some lengths, styles and options are non-standard, non-returnable. View complete specifications at: samtec.com UMPT NO. OF PLATING WELD LATCH UMPT 01 RA XR - - - - - - - POSITIONS OPTION TAB OPTION (Leave blank 02, 03, 04, L WT TR for no latch) = 10 (0.25 m) = Weld Tab = Tape & Reel 05, 06, 07, Gold on contact, Through-hole 08, 09, 10 P Matte Tin on tail FR = Plastic = Full Reel top latch S Tape & Reel = 30 (0.76 m) (must order max. UMPT-RA M Gold on contact, quantity per reel Board Mates: = Metal Matte Tin on tail contact Samtec for side latches quantity breaks) UMPS T Cable Mates: = Matte Tin UMPC* (*UMPT requires NO. OF B B A (P & No latch) (M latch) POSITIONS -P or -M option (13.60) (11.10) (11.55) for mating) 02 .535 .437 .455 (9.75) (15.60) (13.10) (13.55) .384 03 .614 .516 .533 (17.60) (15.10) (15.55) 04 .693 .594 .612 A (19.60) (17.10) (17.55) 05 .772 .673 .691 (21.60) (19.10) (19.55) 06 (13.30) .850 .752 .770 .524 (9.65) (23.60) (21.10) (21.55) 07 .380 .929 .831 .848 (25.60) (23.10) (23.55) 08 1.008 .909 .927 (27.60) (25.10) (25.55) 09 1.087 .988 1.006 B UMPT0401XRAWTP SHOWN (29.60) (27.10) (27.55) 10 UMPT0401XRAWTM SHOWN 1.165 1.067 1.085 Note: Some lengths, styles and options are non-standard, non-returnable. View complete specifications at: samtec.com UMPT-RA F-221 (Rev 21MAY21) samtec.com/mPOWER Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.