CHIP TYPES SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Upgrade Chip type, Extremely Low Impedance Long Life Series CM Low Impedance Solvent Proof Chip type, low impedance temperature range up to 105 C Designed for surface mounting on high density PC board Applicable to automatic insertion machine using carrier tape Complied to the RoHS directive Item Characteristics Operating temperature range -55 ~ +105 C Leakage current max. I = 0.01CV or 3 A whichever is greater (after 2 minutes) Capacitance tolerance 20% at 120Hz, 20 C WV 6.3 10 16 25 35 50 63 ~ 100 Dissipation factor max. (at 120Hz, 20 C) tan 0.26 0.19 0.16 0.14 0.13 0.12 0.10 WV 6.3 10 16 25 35 50 ~ 100 Low temperature characteristics 2 2 Z-25 C/Z+20 C 2 2 2 2 (Impedance ratio at 120Hz) 3 3 Z-55 C/Z+20 C 4 4 4 3 Leakage current Less than specified value Capacitance change Within 30% of initial value Load life tan Less than 250% of specified value (after application of the rated voltage for 5000 hours at 105 C) D D 6.3, 86.2mmL D 8 Life time 3000 hours 5000 hours After 1000 hours no load test, leakage current, capacitance and tan are same as load life value. Shelf life (at 105 C) The measurement shall be performed at 20 C by the KS C IEC 60384 - 4 The following specifications shall be satisfied when the capacitors are restored to 20 C after exposing them at 250 C for 10 seconds. Leakage current Less than specified value Resistance to soldering heat Capacitance change Within 10% of initial value tan Less than specified value Unit : mm DRAWING -Series code of CM is M 6.3 86.2) DL R A B C E 6.35.8 0.5~0.8 2.4 6.6 6.6 2.2 6.37.7 0.5~0.8 2.4 6.6 6.6 2.2 86.2 0.5~0.8 3.3 8.3 8.3 2.3 810 0.8~1.1 2.9 8.3 8.3 3.1 1010 0.8~1.1 3.2 10.3 10.3 4.5 12.5 13.5 0.8~1.4 4.6 12.8 12.8 4.5 Voltage mark for 6.3V is 6 810, 10 10) 12.5) 73 J J SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS CM series DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT WV 6.3 10 16 25 35 50 F 10 0.86 170 6.35.8 15 6.35.8 0.86 170 22 6.35.8 0.86 170 0.66 280 6.37.7 6.35.8 33 6.35.8 0.43 240 6.35.8 0.43 240 0.43 240 0.63 300 86.2 6.37.7 0.66 280 47 6.35.8 0.43 240 6.35.8 0.43 240 6.35.8 0.43 240 6.35.8 0.43 240 86.2 0.63 300 6.35.8 0.39 240 6.35.8 0.39 240 6.37.7 68 6.35.8 0.39 240 6.35.8 0.39 240 0.32 290 810 0.32 350 6.37.7 0.32 290 100 6.35.8 0.39 240 6.35.8 0.39 240 6.35.8 0.39 240 810 0.16 600 0.16 700 1010 86.2 0.26 300 6.35.8 0.39 240 6.35.8 0.39 240 150 6.37.7 0.32 290 810 0.16 600 8 10 0.16 600 6.37.7 0.36 290 6.37.7 0.32 290 220 6.35.8 0.39 240 810 0.16 600 10 10 0.08 850 86.2 0.26 300 86.2 0.26 300 6.37.7 0.32 290 330 810 0.16 600 810 0.16 600 10 10 0.1 850 86.2 0.26 300 Ripple current (mA rms) at 105 C, 100kHz 470 810 0.16 600 810 0.16 600 1010 0.08 850 810 0.16 600 680 1010 0.08 850 Impedance () at 20 C, 100kHz Case size D X L (mm) 1000 1010 0.08 850 WV 63 80 100 F 10 2 80 2.4 60 2 100 6.37.7 6.37.7 810 22 6.37.7 1.2 120 810 1.3 130 810 2 140 33 810 0.65 250 810 1.3 130 1010 0.8 330 47 0.65 250 0.7 200 0.45 500 810 10 10 12.513.5 68 0.35 400 0.32 500 0.45 500 1010 12.5 13.5 12.513.5 100 1010 0.35 400 12.5 13.5 0.32 500 150 0.16 800 0.32 500 12.513.5 12.5 13.5 220 0.16 800 12.513.5 FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT Frequency 50Hz 120Hz 300Hz 1kHz 10kHz Coefficient 0.35 0.5 0.64 0.83 1.00 74