109-1000M40 Sanyo Denki

DC AC Resin filter kits Dimensions (unit: mm) Material Guard, cover: Resin (PPE+PS) UL file no. E82268 94V-0 Filter: Polyurethane foam UL file no. E74916 (S) 94HF-1 PPI: Particles Per Inch Indicates the number of holes per inch. Note that the higher the number, the finer the grain of the sponge. 120 mm sq. type Model no. Mass (g) 109-1000F13 (13 PPI) 109-1000F20 (20 PPI) 44 109 1000 30 30 - F ( PPI) 109-1000F40 (40 PPI) Replacement filter model no. Quantity 109-1000M13 (13 PPI) 109-1000M20 (20 PPI) 5 109-1000M30 (30 PPI) 109-1000M40 (40 PPI) 10.510.50.50.5 12412411 444.34.30.30.3 104.8104.80.30.3 4411110.50.5 44220.50.5 Airflow - Static pressure characteristics Mounting example Filter replacement (example) Measured with our double chamber Replacement filters can be replaced by measuring device (120 mm sq. type) taking off the front part of the filter kit. Pa Hexagonal There is no need to remove the screws. 160 nuts (4) Fan unit 140 9G1212G101 120 * With lter kit 100 (109-1000F20) equipped * With lter kit 80 (109-1000F40) equipped Fan 60 40 20 Chassis 0 3 1234 5 Filter kits m /min Air ow Small pan-head screws (4) Replacement lters Applied voltage: 12 VDC * Filter kit is attached on air inlet side of fan. Filter kit is one of the option to keep air in the chassis clean filtering dust in external atmosphere when pulling-air cooling is implemented. The filter kit is hooked up through mounting hole of fan frame with screw as well as finger guard. Some performances (airflow & static pressure) of the fan motor decreases when filter kit is hooked up. This Filter Kit is composed of 3 components, including a guard, a filter and a cover. It is delivered as a finished product at delivery, saving assembly time when mounting. It can be mounted by inserting a screw in the apertures of the cover. The filter and cover can be easily removed from the guard with one touch. There is no need for fan removal when undertaking maintenance. Operating temperature limit is between -10 to +60C. (non condensing) The filter will deteriorate with age, and the level of deterioration will vary upon usage conditions. Please be aware that the filter has a greater tendency to deteriorate under high temperature and humidity. For long-term storage, please store under the temperature range of 10 to 30C, humidity range of 20 to 65%. Usage and storage period is approximately 2 years. Cooling ability decreases with filter contamination due to clogging. Filter replacement is recommended approximately every six months of usage. Please replace the filter if deterioration or clogging is seen at inspection. When replacing the filter, please use genuine SANYO DENKI filters. Do not water-wash the filter. Avoid use and storage under high temperature or humidity, direct sunlight or exposure to ultraviolet light, or in corrosive gas. No nuts or screws for use in attachment included. Static pressure 12412411 104.8104.80.30.3X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Fan Accessories category: Click to view products by Sanyo Denki manufacturer: Other Similar products are found below : LZ31 LZ32P-1 63070-2-4013 64442-1-7612 71882-2-4053 73816-2-3634 95778-1-5171 99485901 1247-4-6254 RF119 2151-4-7320 27453.32262 95779-1-5171 9614-2-4013 99485906 F92-B 2170-4-7320 27453.32241 R88ACPU001M1 R88ACPU001M2 31570-2-4013 LZ215 LZ22-2 LZ24-1 LZ24B LZ30-9 LZ37-2 450-20-0025 525-00-0009 420-05-0276 450-20-0017 450-20-0020 04.846.1353.0 04.846.1453.0 055032 08121 08188 08195 08196 09576-2-4013 54476-2-4013 71883-2-4053 52545-2-4037 63071-2-4013 52544-2-4037 64445-1-7612 66786-4-7320 88601-2-2929 08164 4013-2-4039