ACDC Fan 92 92 38 mm San Ace 92AD 9AD type General Specifications Material Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0) Expected life See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60C, rated voltage) Motor structure Brushless DC motor Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 547. Dielectric strength 50/60 Hz, 1500 VAC, for 1 minute (between input terminal and frame, and between sensor output and frame) Insulation resistance 10 M or more with a 500 VDC megger Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -30 to +75C (Non-condensing) Mass 250 g Do not solder wires directly to AC input terminals. Specifications The models listed below have ribs and no sensors. For models without ribs, append1 to the end of model numbers. Rated voltage Operating voltage range Frequency Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. -1 V V Hz A W min m/min CFM Pa inchH O dB (A) C h 9AD0901H12 0.08 4.5 3850 1.5 53.0 90 0.36 40 100 to 240 90 to 264 50/60 -20 to +75 60000/60C 9AD0901M12 0.06 3.0 3100 1.18 41.7 56 0.22 33 The models listed below have ribs and low-speed sensors. For models without ribs, append1 to the end of model numbers. Rated voltage Operating voltage range Frequency Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. -1 V V Hz A W min m/min CFM Pa inchH O dB (A) C h 9AD0901H1H 0.08 4.5 3850 1.5 53.0 90 0.36 40 100 to 240 90 to 264 50/60 -20 to +75 60000/60C 9AD0901M1H 0.06 3.0 3100 1.18 41.7 56 0.22 33 Set Models Fan, finger guard, plug cord, screws, etc. can be purchased in one package. For details, please refer to p. 594. Set items Order no. Fan Voltage Low-speed sensor Plug cord Finger guards Mounting screws ST1-9AD0901H12 9AD0901H12 489-1635-L10 109-099E ST1-9AD0901M12 9AD0901M12 489-1635-L10 109-099E 100 to M455 mm (4 screws) ST1-9AD0901H1H 240 V 9AD0901H1H 489-1635-L10 109-099E ST1-9AD0901M1H 9AD0901M1H 489-1635-L10 109-099E Airflow - Static Pressure Characteristics 9AD0901H12, 9AD0901H1H 9AD0901M12, 9AD0901M1H 2 2 (inch H O) (Pa) (inch H O) (Pa) 100 60 0.4 50 0.20 80 0.3 100 to 240 V 50/60 Hz 100240 V 50/60 Hz 100 to 240 V 50/60 Hz 100240 V 50/60 Hz 40 0.15 60 30 0.2 0.10 40 20 0.1 0.05 20 10 0 0 3 3 (m /min) 0 0.4 0.8 1.2 1.6 0 0.4 0.8 1.2 1.6 (m /min) (CFM) (CFM) 0 10 20 30 40 50 0 10 20 30 40 50 Airflow Airflow 476 Static pressure Static pressure (unit: mm) Dimensions (With ribs) without Sensor with Low-speed sensor Lead wire AWG24 4-4.30.3 AWG24 4-4.30.3 Mounting hole UL 1007 UL 1007 Mounting hole (4) (4) 82.50.3 (4) (4) 380.5 82.50.3 380.5 920.5 920.5 Rotating direction Airflow direction Rotating direction Airflow direction Tyco Electronics 171822-2 Connector: Tyco Electronics 171822-2 Pin.1Pin.2 - (Pin1 Sensor output: Yellow Pin2 -: Black) Tyco Electronics 170262-1 Contact: Tyco Electronics 170262-1 * Recommended connectors and contacts are listed below. Tyco Electronics 172211-2 Connector: Tyco Electronics 172211-2 Tyco Electronics 170376-1 Contact: Tyco Electronics 170376-1 Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side Outlet side 90.5 90.5 4-4.5 4-4.5 82.50.3 82.50.3 Wiring Diagram without Sensor with Low-speed sensor FAN 10 mA max. Yellow Photocoupler Pull-up resistor +27.6 V max. FAN Senser output Black GND (0 V) 477 105 97 AC power supply 90.5 920.5 82.50.3 AC power supply 82.50.3 90.5 920.5 82.50.3 82.50.3 10010 ACDC Fan 92 mm sq. AC