9GA0912P4J031 Sanyo Denki

DC Fan 92 92 25 mm San Ace 92 9GA type Low Power Consumption Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0) Expected life See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 547. Dielectric strength 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 10 M or more with a 500 VDC megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -30 to +70C (Non-condensing) Sensor Control Lead wire Red Black Yellow Brown (For models without PWM control function, there is no speed control wiring.) Mass 125 g Specifications The models listed below have ribs and pulse sensors with PWM control function. For models without ribs, append1 to the end of model numbers. PWM duty Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. -1 V V cycle* % A W min m/min CFM Pa inchH O dB (A) C h 100 0.39 4.68 5000 2.2 77.7 105 0.42 43 9GA0912P4J03 0 0.06 0.72 1500 0.65 23.3 9.4 0.04 14 100 0.28 3.36 4400 1.93 68.2 81 0.33 39 9GA0912P4G03 12 10.2 to 13.8 0 0.06 0.72 1500 0.65 23.3 9.4 0.04 14 100 0.2 2.4 3800 1.67 59.0 60.6 0.24 35 9GA0912P4S03 0 0.06 0.72 1500 0.65 23.3 9.4 0.04 14 -20 to +70 60000/60C 100 0.2 4.8 5000 2.2 77.7 105 0.42 43 9GA0924P4J03 0 0.04 0.96 1500 0.65 23.3 9.4 0.04 14 100 0.15 3.6 4400 1.93 68.2 81 0.33 39 9GA0924P4G03 24 20.4 to 27.6 0 0.04 0.96 1500 0.65 23.3 9.4 0.04 14 100 0.12 2.88 3800 1.67 59.0 60.6 0.24 35 9GA0924P4S03 0 0.04 0.96 1500 0.65 23.3 9.4 0.04 14 * PWM frequency: 25 kHz The following sensor and control options are available for selection. Available for all models. Without sensor Pulse sensor Differs according to the model. Refer to the table on p. 572. Lock sensor The models listed below have ribs and pulse sensors. For models without ribs, append1 to the end of model numbers. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. -1 V V A W min m/min CFM Pa inchH O dB (A) C h 9GA0912H401 0.19 2.28 3300 1.45 51.2 45.6 0.18 31 9GA0912F401 0.14 1.68 2800 1.23 43.5 32.9 0.13 28 10.2 to 13.8 9GA0912M401 12 0.11 1.32 2400 1.05 37.1 24 0.096 24 9GA0912L401 0.09 1.08 2000 0.87 30.7 16.7 0.067 21 9GA0912W401 7 to 16 0.19 2.28 3300 1.45 51.2 45.6 0.18 31 -20 to +70 60000/60C 9GA0924H401 20.4 to 27.6 0.09 2.16 3300 1.45 51.2 45.6 0.18 31 9GA0924F401 16 to 27.6 0.08 1.92 2800 1.23 43.5 32.9 0.13 28 9GA0924M401 24 0.05 1.2 2400 1.05 37.1 24 0.096 24 14 to 27.6 9GA0924L401 0.03 0.72 2000 0.87 30.7 16.7 0.067 21 9GA0924W401 12 to 28.8 0.09 2.16 3300 1.45 51.2 45.6 0.18 31 The following sensor and control options are available for selection. Available for all models. Without sensor Lock sensor 142 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9GA0912P4J03 With pulse sensor with PWM control function PWM duty cycle Operating voltage range PWM duty - Speed characteristics example Voltage: DC12 V12 VDC 2 (inch H2O) (Pa) (inch H O) (Pa) PWM duty cycle 100% -1 1DC12 V2 VDC PWM100% (min ) PWM frequency: 25 kHzPWM25 kHz 120 140 -1 5000 5000 min 0.5 120 0.4 100 13.8 V 4000 PWM PWM duty cycle 0.4 100 100% 80 12 V 0.3 3000 80 10.2 V 0.3 60 60 0.2 50% 2000 0.2 40 -1 40 1500 min 0.1 1000 0% 0.1 20 20 0 0 0 0 3 3 0.5 1.0 1.5 2.0 2.5 (m /min) 0.5 1.0 1.5 2.0 2.5 (m /min) 0 100 (%) PWM duty cycle (CFM) (CFM) PWM 0 20 40 60 80 0 20 40 60 80 Airflow Airflow 9GA0912P4G03 With pulse sensor with PWM control function PWM duty cycle Operating voltage range PWM duty - Speed characteristics example Voltage: 12 VDC DC12 V (inch H2O) (Pa) (inch H2O) (Pa) PWM duty cycle 100% -1 PWM frequency: 25 kHz 1DC12 V2 VDC PWM100% (min ) PWM25 kHz 0.4 100 0.4 100 5000 -1 4400 min 80 80 13.8 V 4000 0.3 0.3 PWM PWM duty cycle 12 V 100% 60 60 3000 10.2 V 0.2 0.2 40 40 2000 50% -1 1500 min 0.1 0.1 20 0% 20 1000 0 0 3 3 0 0 0.5 1.0 1.5 2.0 (m /min) 0.5 1.0 1.5 2.0 2.5 (m /min) 0 100 (%) (CFM) PWM PWM duty cycle 0 20 40 60 0 20 40 60 80 (CFM) Airflow Airflow 9GA0912P4S03 With pulse sensor with PWM control function PWM duty cycle Operating voltage range PWM duty - Speed characteristics example Voltage: 12 VDC DC12 V (inch H2O) (Pa) (inch H2O) (Pa) PWM duty cycle 100% -1 PWM frequency: 25 kHz 12 VDC PWM100% DC12 V (min ) PWM25 kHz 80 80 5000 0.3 0.3 13.8 V 4000 -1 60 3800 min 60 PWMPWM duty cycle 12 V 0.2 0.2 100% 3000 10.2 V 40 40 2000 0.1 50% 0.1 -1 1500 min 20 20 0% 1000 0 0 3 0 (m /min) 3 0.5 1.0 1.5 2.0 0 0.5 1.0 1.5 2.0 (m /min) 0 100 (%) (CFM) PWM duty cycle PWM 0 20 40 60 (CFM) 0 20 40 60 Airflow Airflow 9GA0924P4J03 With pulse sensor with PWM control function PWM duty cycle Operating voltage range PWM duty - Speed characteristics example Voltage: DC24 V24 VDC (inch H2O) (Pa) (inch H2O) (Pa) PWM duty cycle 100% -1 24 VDCDC24 V PWM100% (min ) PWM frequency: 25 kHzPWM25 kHz 140 120 -1 5000 min 5000 0.5 120 0.4 100 27.6 V 4000 PWMPWM duty cycle 0.4 100 100% 80 24 V 0.3 80 3000 0.3 20.4 V 60 60 0.2 50% 2000 0.2 40 -1 40 1500 min 0.1 0.1 1000 0% 20 20 0 0 0 3 0 3 0.5 1.0 1.5 2.0 2.5 (m /min) 0.5 1.0 1.5 2.0 2.5 (m /min) 0 100 (%) PWM PWM duty cycle (CFM) 0 20 40 60 80 (CFM) 0 20 40 60 80 Airflow Airflow 143 Static pressure Static pressure Static pressure Static pressure Static pressure Static pressure Static pressure Static pressure Fan speed Fan speed Fan speed Fan speed DC Fan 92 mm sq. DC