9WL0812P4J001 Sanyo Denki

Splash Proof Fan IP68 80 80 25 mm San Ace 80W 9WL type General Specifications Material Frame: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 547. Dielectric strength 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 10 M or more with a 500 VDC megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -30 to +70C (Non-condensing) Sensor Control Lead wire Red Black Yellow Brown (For models without PWM control function, there is no speed control wiring.) Mass 150 g Ingress protection IP68 Specifications The models listed below have pulse sensors with PWM control function. PWM duty Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. -1 V V % A W min m/min CFM Pa inchH O dB (A) C h cycle* 100 0.6 7.2 7400 2.07 73.0 177 0.71 49 9WL0812P4J001 20 0.06 0.72 1800 0.5 17.6 10.4 0.04 16 100 0.3 3.6 5500 1.54 54.3 98 0.39 43 9WL0812P4G001 12 10.8 to 13.2 25 0.05 0.6 1400 0.39 13.7 6.3 0.02 14 100 0.12 1.44 3700 1.03 36.3 44 0.17 31 9WL0812P4H001 25 0.04 0.48 1100 0.3 10.5 3.9 0.01 13 -20 to +70 180000/60C 100 0.28 6.72 7400 2.07 73.0 177 0.71 49 9WL0824P4J001 20 0.05 1.2 2400 0.67 23.6 18.6 0.07 22 100 0.14 3.36 5500 1.54 54.3 98 0.39 43 9WL0824P4G001 24 21.6 to 26.4 20 0.02 0.48 1200 0.33 11.6 4.6 0.01 13 100 0.05 1.2 3700 1.03 36.3 44 0.17 31 9WL0824P4H001 30 0.02 0.48 1100 0.3 10.5 3.9 0.01 13 * PWM frequency: 25 kHz. Fan does not rotate when PWM duty cycle is 0%. The following sensor and control options are available for selection. Differs according to the model. Refer to the table on p. 579. Without sensor Pulse sensor Lock sensor The models listed below have pulse sensors. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. -1 V V A W min m/min CFM Pa inchH O dB (A) C h 9WL0812L4001 12 8 to 13.2 0.06 0.72 2300 0.64 22.6 17 0.068 22 -20 to +70 180000/60C 9WL0824F4001 24 12 to 26.4 0.045 1.08 3300 0.92 32.5 35 0.14 29 The following sensor and control options are available for selection. Available for all models. Without sensor 279 Splash Proof Fan 80 mm sq. DC Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9WL0812P4J001 With pulse sensor with PWM control function PWM duty cycle Operating voltage range PWM duty - Speed characteristics example Voltage: 12 VDC DC12 V 2 (inch H O) (Pa) (inch H2O) (Pa) -1 (min ) 12 VDC PWM duty cycle 100% DC12 V PWM100% PWM frequency: 25 kHzPWM25 kHz 200 200 0.8 0.8 8000 -1 PWMPWM duty cycle 7400 min 180 180 0.7 0.7 7000 100% 160 160 13.2 V 0.6 0.6 6000 140 140 12 V 0.5 0.5 5000 120 120 10.8 V 100 100 0.4 0.4 4000 80 80 0.3 0.3 3000 60% 60 60 0.2 0.2 2000 40 40 0.1 0.1 20% 1000 20 20 0 0 3 3 (m /min) 0 0.5 1.0 1.5 2.0 2.5 0 0.5 1.0 1.5 2.0 2.5 (m /min) 0 100 (%) PWM (CFM) PWM duty cycle 0 20 40 60 80 0 20 40 60 80 (CFM) Airflow Airflow 9WL0812P4G001 With pulse sensor with PWM control function PWM duty cycle Operating voltage range PWM duty - Speed characteristics example Voltage: DC12 V12 VDC (inch H2O) (Pa) (inch H2O) (Pa) -1 (min ) 1DC12 V2 VDC PWM duty cycle 1PWM100%00% PWM frequency: 25 kHzPWM25 kHz 120 120 6000 0.45 0.45 -1 110 110 5500 min PWM duty cyclePWM 0.40 100 0.40 100 5000 100% 90 90 0.35 0.35 13.2 V 80 80 4000 0.30 0.30 12 V 70 70 0.25 0.25 10.8 V 60 60 3000 0.20 50 0.20 50 40 40 2000 0.15 0.15 60% 30 30 0.10 0.10 20 20 1000 0.05 25% 0.05 10 10 0 0 3 3 (m /min) (m /min) (%) 0 0.5 1.0 1.5 2.0 0 0.5 1.0 1.5 2.0 0 100 PWM PWM duty cycle (CFM) (CFM) 0 10 20 30 40 50 60 70 0 10 20 30 40 50 60 70 Airflow Airflow 9WL0812P4H001 With pulse sensor with PWM control function PWM duty cycle Operating voltage range PWM duty - Speed characteristics example Voltage: DC12 V12 VDC 2 (inch H2O) (Pa) (inch H O) (Pa) -1 (min ) PWM duty cycle 100% 1DC12 V2 VDC PWM100% PWM frequency: 25 kHzPWM25 kHz 60 0.24 60 0.24 4000 -1 0.22 55 0.22 55 3700 min 3500 50 0.20 50 0.20 PWM duty cyclePWM 0.18 45 0.18 45 3000 100% 13.2 V 40 0.16 40 0.16 12 V 2500 0.14 35 0.14 35 30 10.8 V 0.12 30 0.12 2000 0.10 25 0.10 25 1500 0.08 20 0.08 20 60% 0.06 15 0.06 15 1000 0.04 0.04 10 10 25% 500 0.02 5 0.02 5 0 0 3 3 (m /min) 0 0.2 0.4 0.6 0.8 1.0 1.2 (m /min) 0 0.2 0.4 0.6 0.8 1.0 1.2 0 100 (%) PWM PWM duty cycle 0 5 10 15 20 25 30 35 40 (CFM) 0 5 10 15 20 25 30 35 40 (CFM) Airflow Airflow 9WL0824P4J001 With pulse sensor with PWM control function PWM duty cycle Operating voltage range PWM duty - Speed characteristics example Voltage: 24 VDC DC24 V 2 2 -1 (inch H O) (Pa) (inch H O) (Pa) (min ) PWM duty cycle 100% 24 VDCDC24 V PWM100% PWM frequency: 25 kHz PWM25 kHz 200 200 0.8 0.8 8000 -1 180 180 7400 min 0.7 PWM duty cycle 0.7 PWM 7000 160 100% 160 26.4 V 0.6 0.6 6000 140 140 24 V 0.5 0.5 5000 120 120 21.6 V 0.4 100 0.4 100 4000 80 80 60% 0.3 0.3 3000 60 60 0.2 0.2 2000 40 40 20% 0.1 0.1 1000 20 20 0 0 3 3 (m /min) (m /min) 0 0.5 1.0 1.5 2.0 2.5 0 0.5 1.0 1.5 2.0 2.5 0 100 (%) PWM duty cycle PWM (CFM) (CFM) 0 20 40 60 80 0 20 40 60 80 Airflow Airflow 280 Static pressure Static pressure Static pressure Static pressure Static pressure Static pressure Static pressure Static pressure Fan speed Fan speed Fan speed Fan speed