9WPA0924P4G201 Sanyo Denki

1. DIMENSIONS AND PARTS LIST <DIMENSIONS> 25.20.5 920.5 4-4.50.3 LABEL(NOTE 1-1) (4) (4) 82.50.3 +50 300 0 (10) AIRFLOW DIRECTION ROTATING DIRECTION NOTE 1-1. PRINT PRODUCT NAME, MODEL No., MANUFACTURER, AND MANUFACTURED DATE ETC. 1-2. ALL ELECTRICAL PARTS IN THIS FAN MOTOR HAVE BEEN <LEAD WIRE CONNECTION TABLE> COATED WITH A LAYER OF RESIN. FAN SIGNAL LEAD WIRE COLOR ECN No. Title + UL1430 AWG26 RED E0204681 Unit New Design GND UL1430 AWG26 BLACK C.KURASHIMA mm 20-10-30 PWM UL1430 AWG26 BROWN Scale Dwg. No. Rev. SENSOR UL1430 AWG26 YELLOW - 9WPA0924P4G201 B Approved By Checked By Designed By TE.YAMAZAKI A.NAKAYAMA M.AUTIDA 20-11-14 20-11-14 20-11-13 Group User Page D12 E0 1/4 82.50.3 920.52. DESCRIPTION AND AIRFLOW-STATIC PRESSURE CHARACTERISTICS EXAMPLE <DESCRIPTION> <AIRFLOW-STATIC PRESSURE CHARACTERISTICS EXAMPLE> ITEM UNIT DESCRIPTION inchH O Pa 2 24 V DC 140 PWM DUTY CYCLE % 100 20 0 RATED VOLTAGE V DC 24 0.5 120 OPERATING VOLTAGE RANGE V DC 21.6 ~ 26.4 3 m /min MAX. AIRFLOW 2.45 0.52 - 100 0.4 PWM DUTY CYCLE (NOTE 2-2) (CFM) (86.5) (18.4) - 100 % 80 MAX. STATIC PRESSURE Pa 126 6 - 0.3 (NOTE 2-2) (inchH O) (0.51) (0.02) - 2 60 RATED CURRENT 0.2 A 0.25 0.03 0.03 MAX. 40 (NOTE 2-2) PWM DUTY CYCLE -1 20 % 0.1 RATED SPEED min 5700570 1200360 NO ROTATION 20 INSULATION RESISTANCE - 10 M MIN. AT 500 V DC (NOTE 2-3) 0 3 0 0.5 1.0 1.5 m min 2.0 2.5 3.0 DIELECTRIC STRENGTH - 1 MINUTE AT 500 V AC, 50/60 Hz CFM 0 20 40 60 80 100 (NOTE 2-3) AIRFLOW OPERATING TEMPERATURE -40 ~ 70 NOTE 2-1. VALUES FOR EACH CHARACTERISTIC ARE AT ROOM STORAGE TEMPERATURE -40 ~ 70 TEMPERATURE AND NORMAL HUMIDITY. 40,000 h / 60 (L10, CONTINUOUS OPERATION) EXPECTED LIFE - SOUND PRESSURE LEVEL 2-2.UNSPECIFIED VALUE IS THE NOMINAL VALUE. dB(A) 47 11 - (NOTE 2-2, 2-4) g MASS APPROX. 135 2-3.MEASURED BETWEEN LEAD WIRE CONDUCTORS AND FRAME. FRAME, IMPELLER : PLASTICS MATERIAL - BEARING SYSTEM - 2 BALL BEARINGS 2-4.MEASURED AT 1 m FROM THE AIR INLET. 1 m - SOURCE CURRENT: 1 mA MAX. AT CONTROL VOLTAGE 0 V 2-5.MOTOR IS PROTECTED FROM DAMAGE OF LOCKED ROTOR CONTROL TERMINAL - SINK CURRENT : 1 mA MAX. AT CONTROL VOLTAGE 5.25 V CONDITION AT THE OPERATING VOLTAGE. CONTROL TERMINAL VOLTAGE : 5.25 V MAX. (OPEN CIRCUIT) - DO NOT LOCK ROTOR OUTSIDE OF OPERATING VOLTAGE. IP68 (IEC 60529:2001) IP CODE - ECN No. Title E0204681 Unit New Design C.KURASHIMA mm 20-10-30 Scale Dwg. No. Rev. - 9WPA0924P4G201 B Approved By Checked By Designed By TE.YAMAZAKI A.NAKAYAMA M.AUTIDA 20-11-14 20-11-14 20-11-13 Group User Page D12 E0 2/4 STATIC PRESSURE