9WS0812M4021 Sanyo Denki

Splash Proof Fan IP54 80 80 25 mm San Ace 80WS 9WS type General Specifications Material Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 547. Dielectric strength 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 10 M or more with a 500 VDC megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -30 to +70C (Non-condensing) Sensor Lead wire Red Black or Blue Yellow Mass 120 g Ingress protection IP54 Specifications The models listed below have ribs and pulse sensors. For models without ribs, append1 to the end of model numbers. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. -1 V V A W min m/min CFM Pa inchH O dB (A) C h 9WS0812H401 0.16 1.92 3100 0.94 33.2 45.1 0.181 32 9WS0812F401 12 10.2 to 13.8 0.13 1.56 2700 0.83 29.3 34.3 0.138 28 9WS0812M401 0.1 1.2 2200 0.65 23.0 23.5 0.094 23 -20 to +70 40000/60C 9WS0824H401 0.09 2.16 3100 0.94 33.2 45.1 0.181 32 9WS0824F401 24 20.4 to 27.6 0.07 1.68 2700 0.83 29.3 34.3 0.138 28 9WS0824M401 0.05 1.2 2200 0.65 23.0 23.5 0.094 23 The following sensor and control options are available for selection. Available for all models. Without sensor Differs according to the model. Refer to the table on p. 581. Lock sensor Airflow - Static Pressure Characteristics 9WS0812H401 With pulse sensor 9WS0812F401 With pulse sensor 9WS0812M401 With pulse sensor Operating voltage range Operating voltage range Operating voltage range (inch H2O) (Pa) (inch H2O) (Pa) (inch H2O) (Pa) 0.25 60 50 50 0.20 0.20 13.8 V 50 0.20 40 40 0.15 0.15 13.8 V 13.8 V 12 V 40 0.15 30 30 12 V 30 10.2 V 12 V 0.10 0.10 10.2 V 0.10 20 20 10.2 V 20 0.05 0.05 0.05 10 10 10 0 0 0 0 0 0 3 3 3 (m /min) (m /min) 0.5 1.0 1.5 0.5 1.0 1.0 (m /min) 0.5 0 10 20 30 40 50 (CFM) 0 10 20 30 40 (CFM) 0 10 20 30 40 (CFM) Airflow Airflow Airflow 285 Static pressure Static pressure Static pressure Splash Proof Fan 80 mm sq. DC Airflow - Static Pressure Characteristics 9WS0824H401 With pulse sensor 9WS0824F401 With pulse sensor 9WS0824M401 With pulse sensor Operating voltage range Operating voltage range Operating voltage range 2 2 (inch H O) (Pa) (inch H O) (Pa) (inch H2O) (Pa) 0.25 60 50 50 0.20 0.20 27.6 V 0.20 50 40 40 0.15 0.15 27.6 V 27.6 V 24 V 40 0.15 30 30 24 V 30 0.10 20.4 V 24 V 0.10 20.4 V 0.10 20 20 20.4 V 20 0.05 0.05 0.05 10 10 10 0 0 0 0 0 0 3 3 3 0.5 1.0 1.5 (m /min) (m /min) (m /min) 0.5 1.0 0.5 1.0 0 10 20 30 40 50 (CFM) 0 10 20 30 40 (CFM) 0 10 20 30 40 (CFM) Airflow Airflow Airflow Dimensions (unit: mm) (With ribs) 4-4.30.3 Mounting hole +30 300 0 (10) Lead wire AWG24 (4) (4) UL 1007 71.50.3 250.5 800.5 Rotating direction Airflow direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 71.50.3 4-4.5 78.5 Options page: p. 532 page: p. 539 Finger guards Resin finger guards Model no.: 109-049E, 109-049H, 109-049C Model no.: 109-1002G 286 90 78.5 800.5 Static pressure 71.50.3 71.50.3 Static pressure Static pressure