SCAPA 2759 Scapa

Scapa 2759 PVC Adhesive Tape DESCRIPTION Scapa 2759 is a plasticised PVC tape, single coated with a rubber based adhesive. Scapa 2759 is available in black. APPLICATIONS Wrapping of automotive electrical wiring harnesses Hand application o Product designed for applications which require a temperature resistance, class T1 class A (85 C) PRODUCT BENEFITS Very flexible and conformable Easy and smooth unwind Easy hand application Good chemical resistance Good electrical insulation Self-extinguishing on harness Lead free DOP free Conforms to European Directive 2000/53/EC for End of Vehicle Life (ELV) recycling (does not contain heavy metals) Operating temperature between 40C to +85C Issue: 4 Date: 19/12/2012 Page 1 of 2 2759.doc TECHNICAL PROPERTIES Unit Nominal Value Test Method Thickness mm 0.09 AFERA 5006 AFERA 5004 Tensile Strength N/cm 17 ASTM D1000 AFERA 5004 Elongation at Break % 150 ASTM D1000 AFERA 5001 Peel Adhesion to Steel N/cm 1.4 (1 min./19mm width) AFERA 5001 1.3 (1 min./19mm width) Peel Adhesion to Backing N/cm 1.6 ASTM D1000 B D45 1333 / Type Flame Resistance on Harness Self-extinguishing FMVSS302 STANDARD PRESENTATION Roll length: 33metres Roll width: 9, 12, 15, 19 and 25mm 38mm Scapa branded cardboard core Core: Cardboard Towerpack Packaging: Colours: Black RECOMMENDATIONS Rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. The storage temperature should be between +5C and +25C. A strict use-by date of 24 months from the date of manufacture is recommended. The tape should be applied with sufficient tension and a minimum of two layers with a half overlap to ensure optimum bonding. The final layer should be wrapped with a lower tension to prevent flagging effects. Surfaces should be clean, dry and free of dust, grease, oil or other contaminants. Issue: 4 Date: 19/12/2012 Page 2 of 2 2759.doc