2763 PVC Adhesive Tape DESCRIPTION Scapa 2763 is a plasticized PVC tape, single coated with a rubber adhesive. Scapa 2763 is available in black and yellow. APPLICATIONS Wrapping of automotive electrical wiring harnesses Hand application Product designed for applications which require a good temperature resistance, class T2 (105C) PRODUCT BENEFITS Tough, flexible and conformable Easy and smooth unwind Self-extinguishing on harness Lead free Conforms to European Directive 2000/53/EC for End of Vehicle Life (ELV) recycling (does not contain heavy metals) Operating temperature between 30C to +105C Issue: 8 Date: 27/02/2009 Page 1 of 2 2763.doc TECHNICAL PROPERTIES Unit Nominal Value Test Method mm 0.11 AFERA 5006 Thickness N/cm 25 AFERA 5004 Tensile Strength % 180 AFERA 5004 Elongation at Break N/cm 1.5 AFERA 5001 Peel Adhesion to Steel N/cm 1.5 AFERA 5001 Peel Adhesion to Backing Self-extinguishing / RENAULT/PSA Flame Resistance Type B STANDARD PRESENTATION Roll length: 33metres Roll width: 9, 12, 19, 25 and 30mm 38mm Scapa branded cardboard core Core: Cardboard Towerpack Packaging: Colours: Black and yellow RECOMMENDATIONS Rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. The storage temperature should be between +5C and +25C. A strict use-by date of 24 months from the date of manufacture is recommended. The tape should be applied with sufficient tension and a minimum of two layers with a half overlap to ensure optimum bonding. The final layer should be wrapped with a lower tension to prevent flagging effects. Surfaces should be clean, dry and free of dust, grease, oil or other contaminants. Issue: 8 Date: 27/02/2009 Page 2 of 2 2763.doc