FN2010-6-07 Schaffner

DATASHEET Single-Stage Filters FN2010 General Purpose AC/DC EMI Filter Rated currents from 1 to 60 A Approvals & Compliances General purpose filtering performance Optional medical versions (B type) Optional safety versions (A type) Optional enhanced performance versions Optional DC optimized versions Features and benefits FN 2010 filters are designed for easy and fast chassis Performance indicators mounting FN 2010 B versions without capacitors to earth comply to 1MOP for ME (medical equipment) acc. IEC 60601-1 FN 2010 A versions with low capacitance to earth for safety critical applications with necessity for low leakage currents FN 2010 filters are also available as enhanced performance and DC optimized versions. With higher attenuation in very compact housing (M, N1,N types) All filters provide a general purpose conducted attenuation performance, based on chokes with Technical specifications high saturation resistance and excellent thermal behavior Rated voltage* 250 VAC, 50/60 Hz 250 VDC FN 2010 filters can be used to cover a broad range Operating frequency DC to 400 Hz of usage and they offer a good size/amperage ratio Rated currents 1 to 60 A 40C max. Various terminal options allow you to select the High potential test voltage P > PE 2000 VAC for 2 sec (equiv. cap <88 nF) desired connection style P > PE 2550 VDC for 2 sec (equiv. cap >88 nF) P > PE 2500 VAC for 2 sec (B types) P > N 1100 VDC for 2 sec Typical applications Temperature range (operation and storage) -25 C to +100 C (25/100/21)** Electrical and electronic equipment UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 (applies to Certified to Consumer goods AC and DC applications) Flammability corresponding to Terminal plastic for -06/-08 version: UL 94 V-0 Household equipment Laces for -07 version: UL 94 VW-1 Medical equipment Grommet for -07 version: UL 94 V-0 Office automation equipment Overvoltage category II acc. IEC 60664-1 Datacom equipment Pollution degree 2 acc. IEC 60664-1 Altitude 2000m (above derating applies)** MTBF 40C/230 V (Mil-HB-217F) 1,250,000 hours Typical electrical schematic 3,200,000 hours (B types) ** maximum RMS operating voltage at rated frequency or the maximum DC operating voltage ** for dedicated requests exceeding this specification (e.g. -40 C or higher altitude) please contact your local Schaffner sales office2 EMC/EMI Products Schaffner Group Datasheets 09 Dec 2021 Filter selection table Inductance*** Filter* Buy Rated current Leakage current** Power loss Capacitance*** Resistance*** Input/Output Weight 40C (25C) 250 VAC/50 Hz 25C/DC L Cx Cy R connections ( 120 VAC/60 Hz) A mA W mH F nF k g FN2010-1-.. 1 (1.15) 0.66 (0.38) 0.8 12 0.1 4.7 1000 -06 -07 65 FN2010-3-.. 3 (3.45) 0.66 (0.38) 1.1 2.5 0.1 4.7 1000 -06 -07 65 FN2010-6-.. 6 (6.9) 0.66 (0.38) 1.7 1 0.1 4.7 1000 -06 -07 65 FN2010-10-.. 10 (11.5) 0.66 (0.38) 2.5 0.8 0.1 4.7 1000 -06 -07 85 FN2010-12-.. 12 (13.8) 0.66 (0.38) 3.6 0.7 0.1 4.7 1000 -06 -07 85 FN2010-16-.. 16 (18.4) 0.66 (0.38) 2.5 0.7 0.1 4.7 1000 -06 -07 -08 140 FN2010-20-.. 20 (23) 0.66 (0.38) 3.8 0.6 0.1 4.7 1000 -06 -07 -08 210 FN2010-30-08 30 (34.5) 0.79 (0.46) 6.3 0.7 0.47 10 1000 -08 470 FN2010-60-24 60 (69) 0.79 (0.46) 14.7 1 1.5 10 330 -24 1100 FN2010A-1-.. 1 (1.15) 0.07 (0.04) 0.8 12 0.1 0.47 1000 -06 -07 65 FN2010A-3-.. 3 (3.45) 0.07 (0.04) 1.1 2.5 0.1 0.47 1000 -06 -07 65 FN2010A-6-.. 6 (6.9) 0.07 (0.04) 1.7 1 0.1 0.47 1000 -06 -07 65 FN2010A-10-.. 10 (11.5) 0.07 (0.04) 2.5 0.8 0.1 0.47 1000 -06 -07 85 FN2010A-12-.. 12 (13.8) 0.07 (0.04) 3.6 0.7 0.1 0.47 1000 -06 -07 85 FN2010A-16-.. 16 (18.4) 0.07 (0.04) 2.5 0.7 0.1 0.47 1000 -06 -07 -08 140 FN2010A-20-.. 20 (23) 0.07 (0.04) 3.8 0.6 0.1 0.47 1000 -06 -07 -08 210 FN2010A-30-08 30 (34.5) 0.07 (0.04) 6.3 0.7 0.47 0.47 1000 -08 470 FN2010A-60-24 60 (69) 0.07 (0.04) 14.7 1 1.5 0.47 330 -24 1100 FN2010B-1-.. 1 (1.15) 0.00 0.8 12 0.1 1000 -06 -07 65 FN2010B-3-.. 3 (3.45) 0.00 1.1 2.5 0.1 1000 -06 -07 65 FN2010B-6-.. 6 (6.9) 0.00 1.7 1 0.1 1000 -06 -07 65 FN2010B-10-.. 10 (11.5) 0.00 2.5 0.8 0.1 1000 -06 -07 85 FN2010B-12-.. 12 (13.8) 0.00 3.6 0.7 0.1 1000 -06 -07 85 FN2010B-16-.. 16 (18.4) 0.00 2.5 0.7 0.1 1000 -06 -07 -08 140 FN2010B-20-.. 20 (23) 0.00 3.8 0.6 0.1 1000 -06 -07 -08 210 FN2010B-30-08 30 (34.5) 0.00 6.3 0.7 0.47 1000 -08 470 FN2010B-60-24 60 (69) 0.00 14.7 1 1.5 330 -24 1100 Enhanced performance FN2010N1-1-06 1 (1.15) 5.34 (3.08) 0.8 12 0.1 68 1000 -06 70 FN2010N1-3-06 3 (3.45) 5.34 (3.08) 1.1 2.5 0.1 68 1000 -06 70 FN2010N1-6-06 6 (6.9) 5.34 (3.08) 1.7 1 0.1 68 1000 -06 70 FN2010N1-10-06 10 (11.5) 5.34 (3.08) 2.5 0.8 0.1 68 1000 -06 85 FN2010N1-12-06 12 (13.8) 3.69 (2.13) 3.6 0.7 0.1 47 1000 -06 85 FN2010M-16-.. 16 (18.4) 3.69 (2.13) 2.5 0.7 0.1 47 1000 -06 -08 140 FN2010M-20-.. 20 (23) 3.69 (2.13) 3.8 0.6 0.1 47 1000 -06 -08 220 FN2010N-30-08 30 (34.5) 7.85 (4.52) 6.3 0.7 0.47 100 1000 -08 400 FN2010N-60-24 60 (69) 7.85 (4.52) 14.7 1 1.5 100 330 -24 1120 *** To compile a complete part number, please replace the -.. with the required I/O connection style (e.g. FN 2010-30-08, FN 2010B-10-06). The different letters code the used Cy values in the filter type (A = 0.47nF M = 47nF N1 = 47nF N = 100nF) *** Maximum leakage under usual AC operating conditions (acc. IEC 60939-3). Note: if the neutral line is interrupted, worst case leakage could reach twice this level. *** Tolerances apply: Inductance: -30/+50%, Capacitance: 20%, Resistance: 10%