DATASHEET Single-Stage Filters FN 2410 and FN 2412 EMC/RFI Filters for Industrial Electronics Excellent filter performance for applications Approvals with high interference levels Filters for two-phase supply up to 2x 520 VAC (P-P) available Fast and comfortable snap-in installation on popular TS 35 DIN-rails up to 45 A Industrial grade terminal blocks for unsurpassed electrical safety Features and benefits FN 2410 filters up to 100 A are designed for traditional chassis mounting For extra fast installation, FN 2412 filters up to 45 A Performance indicators can comfortably be snapped-in on popular TS 35 DIN-rails which are common in most electrical cabinets Both FN 2410 and FN 2412 are also avail- able as H versions. These are ideally suitable for an operation on two phases in a three-phase power network, handling voltages up to 520 VAC All filters provide an exceptional conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior. Thus, all filters retain the expected filter performance even in very noisy applications and under full load conditions Touch-safe industrial grade terminal blocks provide maximum electrical safety and protect humans from undeliberate contact with life conductors. They help to fulfill the most demanding installation Technical specifications standards Maximum continuous operating voltage 1x 250 VAC (FN 2410/FN 2412) Typical applications 2x 520/300 VAC (FN 2410 H/FN 2412 H) Small to medium-sized machines and industrial Operating frequency DC to 400 Hz equipment Rated currents 8 to 100 A 50C (FN 2410) 8 to 45 A 50C (FN 2412) High-end single-phase power supplies High potential test voltage P > E 2000 VAC for 2 sec Single-phase variable speed motor drives, inverters P > N 1100 VDC for 2 sec and converters P > E 2700 VDC for 2 sec (H types) DIN-rail filter versions are ideal for panel building P > P 2250 VDC for 2 sec (H types) and electrical cabinets Protection category IP 20 Various noisy applications with higher power single- 4x rated current at switch on, Overload capability 1.5x rated current for 1 minute, once per hour phase or two-phase supply Temperature range (operation and storage) -25C to +100C (25/100/21) UL 94 V-2 or better Flammability corresponding to Typical electrical schematic Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 MTBF 50C/250 V (Mil-HB-217F) 1,200,000 hours 250,000 hours (H types)2 EMC/EMI Products Schaffner Group Datasheets 23 Apr 2020 Filter selection table Filter Rated current Leakage current* Power loss Input/Output Weight 50C (40C) 250 VAC /50 Hz 25C/50 Hz connections ( 120 VAC /60 Hz) A mA W kg FN 2410-8-44 8 (8.8) 2.60 (1.49) 2.6 -44 0.4 FN 2410-16-44 16 (17.5) 2.60 (1.49) 3.5 -44 0.5 FN 2410-25-33 25 (27.4) 2.60 (1.49) 5.5 -33 0.6 FN 2410-32-33 32 (35.0) 2.60 (1.49) 5.6 -33 0.7 FN 2410-45-33 45 (49.3) 2.60 (1.49) 7.4 -33 0.7 FN 2410-60-34 60 (65.7) 2.60 (1.49) 5.5 -34 1.8 FN 2410-80-34 80 (87.6) 2.60 (1.49) 9.9 -34 1.8 FN 2410-100-34 100 (109.5) 2.60 (1.49) 15.4 -34 1.8 FN 2410 H-8-44 8 (8.8) 2.60 (1.49) 2.6 -44 0.5 FN 2410 H-16-44 16 (17.5) 2.60 (1.49) 3.5 -44 0.6 FN 2410 H-25-33 25 (27.4) 2.60 (1.49) 5.5 -33 0.7 FN 2410 H-32-33 32 (35.0) 2.60 (1.49) 5.6 -33 0.8 FN 2410 H-60-34 60 (65.7) 2.60 (1.49) 5.5 -34 1.9 FN 2410 H-80-34 80 (87.6) 2.60 (1.49) 9.9 -34 1.9 FN 2410 H-100-34 100 (109.5) 2.60 (1.49) 15.4 -34 1.9 FN 2412-8-44 8 (8.8) 2.60 (1.49) 2.6 -44 0.4 FN 2412-16-44 16 (17.5) 2.60 (1.49) 3.5 -44 0.6 FN 2412-25-33 25 (27.4) 2.60 (1.49) 5.5 -33 0.7 FN 2412-32-33 32 (35.0) 2.60 (1.49) 5.6 -33 0.8 FN 2412-45-33 45 (49.3) 2.60 (1.49) 7.4 -33 0.8 FN 2412 H-8-44 8 (8.8) 2.60 (1.49) 2.6 -44 0.5 FN 2412 H-16-44 16 (17.5) 2.60 (1.49) 3.5 -44 0.7 FN 2412 H-25-33 25 (27.4) 2.60 (1.49) 5.5 -33 0.8 FN 2412 H-32-33 32 (35.0) 2.60 (1.49) 5.6 -33 0.9 * Maximum leakage under normal operating conditions (acc. to IEC60939-3). Note: if the neutral line is interrupted, worst case leakage could reach twice this level. Typical filter attenuation Per CISPR 17 A=50 /50 sym B=50 /50 asym C=0.1 /100 sym D=100 /0.1 sym 8 to 45 A types 60 to 100 A types