Single-Phase Filters FN2500 DATA SHEET Low Profile - High performance, EMC/EMI filter Excellent EMC filter for robotics, datacenters Approvals & Compliances and a variety of other applications Available terminals: Fast-on, wire leads, bolt and clamps Voltage rating up to 277 VAC / 400 VDC Fits within 1 height unit (HU) of a 19 rack application 50C operating temperature Certifications FN2520 pending Features and Benefits FN2500 / FN2520 series fits perfectly within 1HU height for rack mount The filters are built to perform perfectly in datacenter and audio video equipment Performance indicators The shape allows convenient and space-saving installation Fulfills the requirements in IEC/EN 62040-1 - very high standard high Uninterruptible power systems (UPS) Fulfills the requirements in IEC 62368-1 - Audio/ Video, Information and Communication Rated current A Technology Equipment Fulfills the requirements in IEC/EN 60335-1 - Household and similar appliances 10 32 Typical Applications Datacenter (at 400 VDC) Building technology with DC power distribution Technical Specifications Robotics, collaborative robots, autonomous machines 277 VAC / 400 VDC (CQC: 250 VAC / 250 VDC) Rated operating voltage Audio and video equipment DC to 60 Hz Operating frequency UPS - Uninterruptible power supplies 10 to 32 A 50C Rated currents 1.5 x rated current for 1 minute once per hour Overload capability Typical electrical schematic Natural cooling AN Cooling 40/100/21 acc. IEC60068-1 Climatic category UL 94 V0 Flammability corresponding to 2 kV Ph-Ph / 4 kV Ph-PE (Level 4) Surge withstand P(DC+) > N(DC-) 1500 VDC for 2 sec* High potential test voltage P(DC+)/N(DC-) > PE 2500 VDC for 2 sec* Derating above 2000 m Altitude UL/IEC 60939-3, CSA 22.2 No. 8-13, GB/T 15287 Certified to > 300,000 h MTBF IP00 / IP20 for -103 terminals Protection category 2 acc. IEC 60664-1 Pollution degree 3M12 acc. IEC 60721-3-3 Vibration and shock II acc. IEC 60664-1 Overvoltage category -40C to +100C (with derating >50C) Temperature range (operation and storage)2 Single-Phase Filters Schaffner Group DATA SHEET 04. Jul 2022 Filter Selection Table Rated Power Weight Filter Leakage current* Inductance** Capacitance** Resistance** Connections*** current loss max**** 50C 277 VAC/50 Hz 25C L1 Cx1 Cx2 Cy1 R line side/load side ( 40C) ( 120 VAC/60 Hz) A mA W mH F F nF k kg Single-stage 10 (11) 0.87 (0.45) 5.4 8.3 1 0.47 10 680 -05 -07 -08 -103 0.3 FN2500-10-yy-C13 15 (17) 0.87 (0.45) 6.4 4.0 1 0.47 10 680 -05 -07 -08 -103 0.3 FN2500-15-yy-C13 FN2500-20-yy- 20 (22) 0.87 (0.45) 6.2 2.4 1 0.47 10 680 -05 -07 -08 -103 0.3 C13 FN2500-25-yy- 25 (27) 0.87 (0.45) 8.0 1.5 1 0.47 10 680 n.a -07 -08 -103 0.3 C13 FN2500-32-yy- 32 (35) 0.87 (0.45) 11.6 1.5 1 0.47 10 680 n.a -07 -08 -103 0.4 C13 * Maximum leakage current under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage current could reach twice this level. ** Tolerances apply: Inductance: -30/+50%, Capacitance: 20%, Resistance: 10%. ***Standard parts have same input and output connections. For combinations, please contact your sales representative. ****Weight depending on choice of connectors. Product selector FN25tt-xx-yy-C13 13 Y-capacitor option 13: 10 nF yy Line / load terminal types 05: fast-on 6.3 x 0.8 mm (up to 20 A only) 07: wire leads 08: M4 screw 103: push-in terminal xx Rated current 10-32: 10 A 32 A tt Product family 00: Single-stage filter L1