FN2560-2-04-C11 Schaffner

DATASHEET Single-Phase Filters FN2560 EMC/EMI line filter for lighting applications Excellent EMC filter for lighting applications Approvals & Compliances Choice between 3 different leakage ratings C00/C11/C16: -C00: no leakage current, medical applications -C11: low leakage current, safety applications -C16: standard version, best filter performance Voltage rating up to 300 VAC Choice between 4 current ratings: 1 A, 2 A, 5 A and 8 A Compact, space-saving design Cable outlets with enhanced length give Features and benefits freedom for flexible installation Versions without X-capacitor available - FN2564 Very high differential mode attenuation Suitable for AC and DC applications Offering a very high differential and common mode performance in low profile housing Easy installation with single strand wires Voltage rating according to high voltage LED lighting market Performance indicators Typical applications Lighting equipment high very high standard LED driver and displays Street lamps and signage Industrial and architectural lighting Rated current A Fluorescent ballasts Other applications with high demand for differential mode performance Technical specifications Typical electrical schematic - FN2560 Rated operating voltage 300 VAC / 300 VDC Rated currents 1 A, 2 A, 5 A and 8 A 60C L1 L2 Operating frequency DC to 60 Hz -40C to 100C (40/100/21)* Temperature range (operation and storage) Climatic class 40/100/21 Cooling AN Flammability corresponding to Plastic material: UL-94V-0 Laces: UL94- VW1 High potential test voltage P(DC+) > PE 3000 VDC for 2 sec P(DC+) > N(DC-) 1500 VDC for 2 sec Typical electrical schematic - FN2564 (no X-cap) Altitude 2000m (above derating applies)* Certified to UL 60939-3, IEC/EN 60939-3, GB/T 15287 L1 L2 Design corresponding to IEC 61347-1 - Lamp controlgear IEC 61547 - Equipment for general lighting purposes Protection category IP20 Pollution degree 2 acc. IEC 60664-1 MTBF > 1.800.000 h Vibration and shock 3M4 (operation) 2M2 (transport) acc. to IEC 60721-3-3 IEC 60721-3-2 Overvoltage category III acc. IEC 60664-1 Terminals Single strand solid wires AWG16 / AWG18 * for dedicated requests exceeding this specification, please contact your local Schaffner sales office2 EMC/EMI Products Schaffner Group Datasheets 15 Apr 2021 Filter selection table Filter Rated current Leakage current* Inductance** Capacitance** Dis. Resistor** Weight Typ. Dissipation 60C 300 VAC/60 Hz L1 L2 Cx Cy R m P A mA mH uH F nF k g W FN2560-1-04-C00 1 0.0 4.0 198 0.470 - 1000 119 0.54 FN2560-1-04-C11 1 0.4 4.0 198 0.470 2 x 4.7 1000 119 0.54 FN2560-1-04-C16 1 3.1 4.0 198 0.470 2 x 33 1000 119 0.54 FN2560-2-04-C00 2 0.0 2.0 98 0.470 - 1000 125 1.52 FN2560-2-04-C11 2 0.4 2.0 98 0.470 2 x 4.7 1000 125 1.52 FN2560-2-04-C16 2 3.1 2.0 98 0.470 2 x 33 1000 125 1.52 FN2560-5-04-C00 5 0.0 1.0 51 0.470 - 1000 130 2.65 FN2560-5-04-C11 5 0.4 1.0 51 0.470 2 x 4.7 1000 130 2.65 FN2560-5-04-C16 5 3.1 1.0 51 0.470 2 x 33 1000 130 2.65 FN2560-8-04-C00 8 0.0 0.5 26 0.470 - 1000 135 3.45 FN2560-8-04-C11 8 0.4 0.5 26 0.470 2 x 4.7 1000 135 3.45 FN2560-8-04-C16 8 3.1 0.5 26 0.470 2 x 33 1000 135 3.45 * Maximum leakage under usual AC operating conditions (acc. IEC 60939-3), calculated at 50Hz. If the neutral line is interrupted, worst case leakage could reach twice this level. ** Tolerances apply: Inductance: -30/+50%, Capacitance: 20%, Resistance: 10% Performance adaptations available Series for reduced reactive currents: FN2564 All FN2560 designations can also be ordered without X-capacitor. For example: FN2564-1-04-C00 - Pro: Lower reactive currents P (DC+) and N(DC-) - Con: Lower differential mode attenuation performance Options with adapted leakage currents (on request) Additionally to the existing C00, C11 and C16 options, 10 other Y-capacitor options (0.47 - 22 nF) are available. For FN2560 and FN2564 series - Pro: Fine adaptation of leakage current between 0.00 mA and 3.11 mA - Con: - Mechanical data 1 A - 5 A: Single strand solid wire 18 AWG 8 A : Single strand solid wire 16 AWG All dimensions in mm 1 inch = 25.4 mm Tolerances according: ISO 2768-m/EN 22768-m