Standard Performance Single-Phase DATA SHEET Filters FN2560 EMC/EMI line filter for lighting applications Excellent EMC filter for lighting applications Approvals & Compliances Choice between 3 different leakage ratings C00/C11/C16: -C00: no leakage current, medical applications -C11: low leakage current, safety applications -C16: standard version, best filter performance Voltage rating up to 300 VAC Features and Benefits Choice between 4 current ratings: 1 A, 2 A, 5 Very high differential mode attenuation A and 8 A Suitable for AC and DC applications Compact, space-saving design Offering a very high differential and common Cable outlets with enhanced length give mode performance in low profile housing freedom for flexible installation Easy installation with single strand wires Versions without X-capacitor available - Voltage rating according to high voltage LED FN2564 lighting market Typical Applications Lighting equipment LED driver and displays Street lamps and signage Industrial and architectural lighting Fluorescent ballasts Performance indicators Other applications with high demand for differential mode performance high very high standard Typical electrical schematic - FN2560 L1 L2 Rated current A Technical Specifications Typical electrical schematic - FN2564 (no X-cap) 300 VAC / 300 VDC Rated operating voltage 1 A, 2 A, 5 A and 8 A 60C Rated currents L1 L2 DC to 60 Hz Operating frequency -40C to 100C (40/100/21)* Temperature range (operation and storage) 40/100/21 Climatic class AN Cooling Plastic material: UL-94V-0 Flammability corresponding to Laces: UL94- VW1 P(DC+) > PE 3000 VDC for 2 sec High potential test voltage P(DC+) > N(DC-) 1500 VDC for 2 sec 2000m (above derating applies)* Altitude UL 60939-3, IEC/EN 60939-3, GB/T 15287 Certified to IEC 61347-1 - Lamp controlgear Design corresponding to IEC 61547 - Equipment for general lighting purposes IP20 Protection category 2 acc. IEC 60664-1 Pollution degree > 1.800.000 h MTBF 3M4 (operation) 2M2 (transport) acc. to IEC 60721-3-3 Vibration and shock IEC 60721-3-2 III acc. IEC 60664-1 Overvoltage category Single strand solid wires AWG16 / AWG18 Terminals/Housing * for dedicated requests exceeding this specification, please contact your local Schaffner sales office2 Standard Performance Single-Phase Filters Schaffner Group DATA SHEET 04. Jul 2022 Filter Selection Table Filter Rated current Rated current Leakage current* Inductance** Capacitance** Dis. Resistor** Weight Typ. Dissipation 60C 40C 300 VAC/60 Hz L1 L2 Cx Cy R m P A A mA mH uH F nF k g W FN2560-1-04-C00 1 1 0.0 4.0 198 0.470 - 1000 119 0.54 1 1 0.4 4.0 198 0.470 2 x 4.7 1000 119 0.54 FN2560-1-04-C11 FN2560-1-04-C16 1 1 3.1 4.0 198 0.470 2 x 33 1000 119 0.54 FN2560-2-04-C00 2 3 0.0 2.0 98 0.470 - 1000 125 1.52 2 3 0.4 2.0 98 0.470 2 x 4.7 1000 125 1.52 FN2560-2-04-C11 FN2560-2-04-C16 2 3 3.1 2.0 98 0.470 2 x 33 1000 125 1.52 FN2560-5-04-C00 5 6 0.0 1.0 51 0.470 - 1000 130 2.65 5 6 0.4 1.0 51 0.470 2 x 4.7 1000 130 2.65 FN2560-5-04-C11 FN2560-5-04-C16 5 6 3.1 1.0 51 0.470 2 x 33 1000 130 2.65 FN2560-8-04-C00 8 10 0.0 0.5 26 0.470 - 1000 135 3.45 8 10 0.4 0.5 26 0.470 2 x 4.7 1000 135 3.45 FN2560-8-04-C11 FN2560-8-04-C16 8 10 3.1 0.5 26 0.470 2 x 33 1000 135 3.45 * Maximum leakage under usual AC operating conditions (acc. IEC 60939-3), calculated at 50Hz. If the neutral line is interrupted, worst case leakage could reach twice this level. ** Tolerances apply: Inductance: -30/+50%, Capacitance: 20%, Resistance: 10% Performance Adaptations Available Series for reduced reactive currents: FN2564 All FN2560 designations can also be ordered without X-capacitor. For example: FN2564-1-04-C00 - Pro: Lower reactive currents P (DC+) and N(DC-) - Con: Lower differential mode attenuation performance Options with adapted leakage currents (on request) Additionally to the existing C00, C11 and C16 options, 10 other Y-capacitor options (0.47 - 22 nF) are available. For FN2560 and FN2564 series - Pro: Fine adaptation of leakage current between 0.00 mA and 3.11 mA - Con: - Mechanical Data 1 A - 5 A: Single strand solid wire 18 AWG 8 A : Single strand solid wire 16 AWG All dimensions in mm 1 inch = 25.4 mm Tolerances according: ISO 2768-m/EN 22768-m