FN282-10-06 Schaffner

DATASHEET IEC Inlet Filters FN 280 Compact filtered power entry module Complies with IEC/EN 60601-1 Approvals Rated currents up to 10 A Single or dual-fuse holder Fuses 5 x 20 mm 2-pole rocker switch General purpose application Optional earth line choke (E type) Optional medical versions (B type) (CQC except HI-types) The FN 280 power entry module combines an IEC inlet, a mains filter with single or dual- fuse holder and a 2-pole rocker switch in a small form factor. Choosing FN 280 product line brings you the rapid availability of a standard filter associated with the Performance indicators necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, fuse options, mounting possibilities and filters for medical applications are designed to offer you the desired solution. Features and benefits High conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior Technical specifications Rear/front or snap-in mounting Single or dual-fuse holder Maximum continuous operating voltage 250 V, 50/60 Hz 2-pole rocker switch DC to 400 Hz Operating frequency Custom-specific versions are available on request Rated currents 1 to 10 A 40C max. High potential test voltage P > PE 2000 VAC for 2 sec (standard types) P > PE 2500 VAC for 2 sec (B types) Typical applications P > N 760 VAC for 2 sec Portable electrical and electronic equipment Protection category IP 40 according to IEC 60529 -25C to +85C (25/85/21) Temperature range (operation and storage) Consumer goods Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 EDP and office equipment Flammability corresponding to UL 94 V-2 or better Single-phase power supplies, switch-mode power MTBF 40C/230 V (Mil-HB-217F) 1,500,000 hours supplies Fuse holder 1 or 2 fuses (5 x 20 mm) (certified to IEC 60127-6) Test and measurement equipment Power acceptance amb. temperature Medical equipment max. 250 V ~ (text is print. below fuse symbol) Marking Rocker switch description Typical electrical schematic Function 2-pole, dark not illuminated Marking I - 0 Electrical specifications Inrush current 82 A 6,000 on-off operations according to UL 1054, TV5 10,000 on-off operations according to ENEC Switch ratings USA (UL) and Canada (C-UL) 10 A, 125 VAC 10 A, 250 VAC 1/3 HP 10 A (4 A), 250 VAC* Europe (ENEC) Mechanical life 50,000 cycles * Value in () relates to the inductive current charge: cos = 0.652 EMC/EMI Products Schaffner Group Datasheets 15 Aug 2019 Filter selection table Filter Rated current Leakage current* Inductance** Capacitance** Resistance** Output Fuses*** Weight 40C (25C) 230 VAC/50 Hz L1 L2 Cx Cy R connections A A mH mH nF nF k Qty g FN 281-1-06 1 (1.2) 373 7.5 220 2.2 1000 -06 1 90 FN 281-2-06 2 (2.4) 373 2 220 2.2 1000 -06 1 90 FN 281-4-06 4 (4.8) 373 1 220 2.2 1000 -06 1 90 FN 281-6-06 6 (7.2) 373 0.45 220 2.2 1000 -06 1 90 FN 281-10-06 10 (11.6) 373 0.34 220 2.2 1000 -06 1 90 FN 282-1-06 1 (1.2) 373 7.5 220 2.2 1000 -06 2 90 FN 282-2-06 2 (2.4) 373 2 220 2.2 1000 -06 2 90 FN 282-4-06 4 (4.8) 373 1 220 2.2 1000 -06 2 90 FN 282-6-06 6 (7.2) 373 0.45 220 2.2 1000 -06 2 90 FN 282-10-06 10 (11.6) 373 0.34 220 2.2 1000 -06 2 90 FN 283-1-06 1 (1.2) 373 7.5 220 2.2 1000 -06 1 90 FN 283-2-06 2 (2.4) 373 2 220 2.2 1000 -06 1 90 FN 283-4-06 4 (4.8) 373 1 220 2.2 1000 -06 1 90 FN 283-6-06 6 (7.2) 373 0.45 220 2.2 1000 -06 1 90 FN 283-10-06 10 (11.6) 373 0.34 220 2.2 1000 -06 1 90 FN 284-1-06 1 (1.2) 373 7.5 220 2.2 1000 -06 2 90 FN 284-2-06 2 (2.4) 373 2 220 2.2 1000 -06 2 90 FN 284-4-06 4 (4.8) 373 1 220 2.2 1000 -06 2 90 FN 284-6-06 6 (7.2) 373 0.45 220 2.2 1000 -06 2 90 FN 284-10-06 10 (11.6) 373 0.34 220 2.2 1000 -06 2 90 FN 285-1-06 1 (1.2) 373 7.5 220 2.2 1000 -06 1 90 FN 285-2-06 2 (2.4) 373 2 220 2.2 1000 -06 1 90 FN 285-4-06 4 (4.8) 373 1 220 2.2 1000 -06 1 90 FN 285-6-06 6 (7.2) 373 0.45 220 2.2 1000 -06 1 90 FN 285-10-06 10 (11.6) 373 0.34 220 2.2 1000 -06 1 90 FN 286-1-06 1 (1.2) 373 7.5 220 2.2 1000 -06 2 90 FN 286-2-06 2 (2.4) 373 2 220 2.2 1000 -06 2 90 FN 286-4-06 4 (4.8) 373 1 220 2.2 1000 -06 2 90 FN 286-6-06 6 (7.2) 373 0.45 220 2.2 1000 -06 2 90 FN 286-10-06 10 (11.6) 373 0.34 220 2.2 1000 -06 2 90 FN 283 E-1-06 1 (1.2) 373 7.5 0.4 220 2.2 1000 -06 1 100 FN 283 E-2-06 2 (2.4) 373 2 0.4 220 2.2 1000 -06 1 100 FN 283 E-4-06 4 (4.8) 373 1 0.4 220 2.2 1000 -06 1 100 FN 283 E-6-06 6 (7.2) 373 0.45 0.4 220 2.2 1000 -06 1 100 FN 284 E-1-06 1 (1.2) 373 7.5 0.4 220 2.2 1000 -06 2 100 FN 284 E-2-06 2 (2.4) 373 2 0.4 220 2.2 1000 -06 2 100 FN 284 E-4-06 4 (4.8) 373 1 0.4 220 2.2 1000 -06 2 100 FN 284 E-6-06 6 (7.2) 373 0.45 0.4 220 2.2 1000 -06 2 100 FN 282 B-1-06 1 (1.2) 2 7.5 220 1000 -06 2 90 FN 282 B-2-06 2 (2.4) 2 2 220 1000 -06 2 90 FN 282 B-4-06 4 (4.8) 2 1 220 1000 -06 2 90 FN 282 B-6-06 6 (7.2) 2 0.45 220 1000 -06 2 90 FN 282 B-10-06 10 (11.6) 2 0.34 220 1000 -06 2 90 *** Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level. *** Tolerances apply: Inductance: -30/+50%, Capacitance: 20%, Resistance: 10% *** Filters are delivered without fuse.