FN388-2-21 Schaffner

DATASHEET IEC Inlet Filters FN 380 Versatile Filtered Power Entry Module Rated currents up to 6 A Approvals Single or dual-fuse holder Fuses 6.3 x 32 mm 5 x 20 mm 2-pole rocker switch General purpose application Optional medical versions (B type) The FN 380 power entry module combines an IEC inlet, a mains filter with asingle or dualfuse holder and a 2-pole rocker switch. Choosing FN 380 product line brings you the rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, fuse options, mounting possibilities and filters for medical applications are designed to offer you the desired solution. Features and benefits Good conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior Rear/front or snap-in mounting Single or dual-fuse holder USA 6.3 x 32 mm or EU 5 x 20 mm fuses 2-pole rocker switch Technical specifications Custom-specific versions are available on request Maximum continuous operating voltage 250 VAC, 50/60 Hz Typical applications Operating frequency 50 to 400 Hz Rated currents 2 to 6 A 40 C max. Portable electrical and electronic equipment High potential test voltage P > PE 2000 VAC for 2 sec (standard types) Consumer goods P > N 760 VAC for 2 sec EDP and office equipment P > PE 2500 VAC for 2 sec (B types) Single-phase power supplies, switch-mode power Protection category IP40 according to IEC 60529 supplies Temperature range (operation and storage) -25 C to +85 C (25/85/21) Test and measurement equipment Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 Medical equipment Flammability corresponding to UL 94 V-2 or better MTBF 40C/230V (Mil-HB-217F) 550,000 hours Rocker switch description Function 2-pole, dark not illuminated Marking I - 0 Electrical specifications Inrush current 51 A 6,000 on-off operations according to UL 1054, TV 5 10,000 on-off operations according to ENEC Mechanical life 50,000 cycles Switch ratings Europe (ENEC) 6 A (4 A), 250 VAC* USA (UL) 6A, 125 VAC 4 A, 250 VAC 1/10 HP Canada (CSA) 6 A, 125 VAC 4 A, 250 VAC 1/10 HP * Value in () relates to the inductive current charge: cos = 0.652 EMC/EMI Products Schaffner Group Datasheets 2014 Filter selection table Filter* Rated current Leakage current** Inductance Capacitance Resistance Output Fuses*** Weight 40 C (25 C) 230 VAC/50 Hz L Cx Cy R connections A A mH nF nF k Qty g FN 380-2-2. 2 (2.4) 373 0.70 47 2.2 13 1 55 FN 380-4-2. 4 (4.8) 373 0.30 47 2.2 13 1 55 FN 380-6-2. 6 (7.2) 373 0.18 47 2.2 13 1 55 FN 382-2-2. 2 (2.4) 373 0.70 47 2.2 13 2 55 FN 382-4-2. 4 (4.8) 373 0.30 47 2.2 13 2 55 FN 382-6-2. 6 (7.2) 373 0.18 47 2.2 13 2 55 FN 385-2-2. 2 (2.4) 373 2.00 47 2.2 13 2 65 FN 385-4-2. 4 (4.8) 373 0.80 47 2.2 13 2 65 FN 385-6-2. 6 (7.2) 373 0.50 47 2.2 13 2 65 FN 388-2-2. 2 (2.4) 373 0.70 47 2.2 13 2 60 FN 388-4-2. 4 (4.8) 373 0.30 47 2.2 13 2 60 FN 388-6-2. 6 (7.2) 373 0.18 47 2.2 13 2 60 FN 389-2-2. 2 (2.4) 373 2.00 47 2.2 13 2 70 FN 389-4-2. 4 (4.8) 373 0.80 47 2.2 13 2 70 FN 389-6-2. 6 (7.2) 373 0.50 47 2.2 13 2 70 FN 382B-2-2. 2 (2.4) 2 0.70 47 1000 13 2 55 FN 382B-4-2. 4 (4.8) 2 0.30 47 1000 13 2 55 FN 382B-6-2. 6 (7.2) 2 0.18 47 1000 13 2 55 FN 389B-2-2. 2 (2.4) 2 2.00 47 1000 13 2 70 FN 389B-4-2. 4 (4.8) 2 0.80 47 1000 13 2 70 FN 389B-6-2. 6 (7.2) 2 0.50 47 1000 13 2 70 * Select the requested fuse holder for fuse EUR-1 or USA-1. ** Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level. *** Filters are delivered without fuse. Product selector Typical electrical schematic FN 380 / FN 382 / FN 385