1-phase filters FN 680 Two-stage performance EMI filter n Rated currents from 1 to 10A Approvals n Very high differential and common-mode attenuation n Good low frequency attenuation Technical specifications Typical electrical schematic Cx R L L1 Cy Maximum continuous operating voltage: 250VAC, 50/60Hz P P Operating frequency: dc to 400Hz Rated currents: 1 to 10A 40C max. E High potential test voltage: P > E 2000VAC for 2 sec P > N 760VAC for 2 sec N N Temperature range (operation and storage): -25C to +100C (25/100/21) Line Load Flammability corresponding to: UL 94V-2 or better Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 MTBF 40C/230V (Mil-HB-217F): 1,400,000 hours Features and benefits Typical applications n FN 680 filters are designed for easy and n FN 680 two-stage filters are designed for n Electrical and electronical equipment fast chassis mounting. very high noise suppression and low n Consumer goods n FN 680 filters offer a perfect combination frequency attenuation. n Power supplies of performance/size ratio. n Faston terminal connection with additional n Building automation n FN 680 two-stage filters provide a very spade solder possibility or wire connection. n Elevators and cranes high differential and common-mode n Custom-specific versions on request. n Office automation equipment attenuation performance, based n Datacom equipment on chokes with high saturation resistance and excellent thermal behavior.> Components > FN 680 Filter selection table Filter* Rated current Leakage current** Inductance Capacitance Resistance Input/Output Weight 40C (25C) 230VAC/50Hz L L1 Cx Cy R connections -06 -07 A A mH mH nF nF k g g FN 680-1-.. 1 (1.2) 410 22.5 1.2 220 4.7 1000 -06 -07 120 130 FN 680-2.5-.. 2.5 (3) 410 16 0.27 220 4.7 1000 -06 -07 230 245 FN 682-4-.. 4 (4.8) 1900 8 0.08 1000 22 330 -06 -07 250 255 FN 682-6.5-.. 6.5 (7.8) 1900 4.1 0.055 470 22 470 -06 -07 590 600 FN 682-10-.. 10 (12) 1900 4 0.04 470 22 470 -06 -07 950 970 * To compile a complete part number, please replace the -.. with the required I/O connection style (e.g. FN 680-1-06, FN 682-10-07). ** Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level. Typical filter attenuation Per CISPR 17 A = 50/50 sym B = 50/50 asym C = 0.1/100 sym D = 100/0.1 sym 1A types 2.5A types 4A types 6.5 and 10A types