FN9222EU-1-06 Schaffner

DATASHEET IEC Inlet Filters FN 9222E General Performance EMC/EMI Filter with Earth Line Choke Rated currents up to 15 A Approvals Excellent performance/size ratio Integrated earth line choke Complies with IEC/EN 60601-1 Snap-in versions (S and S1 type) Optional wide mounting flanges (CQC except HI-types) The FN 9222E IEC inlet filter combines an IEC inlet and mains filter with excellent filter attenuation in a small form factor and integrated earth line choke. Choosing the FN 9222E product line brings you the rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution. Features and benefits Exceptional conducted attenuation performance, Technical specifications based on chokes with high saturation resistance and excellent thermal behavior Maximum continuous operating voltage 250 VAC, 50/60 Hz Rear/front or snap-in mounting Operating frequency dc to 400Hz Optional medical versions (B type) comply with the Rated currents 1 to 15 A @ 50 C max. requirements of IEC/EN 60601-1 for creepage and clearance, leakage current and high potential Approvals by rated current 1 to 10 A (ENEC, CQC) testing 1 to 15 A (UL, CSA) Wide mounting flanges available High potential test voltage P > PE 2000 VAC for 2 sec (standard types) P > PE 2500 VAC for 2 sec (B types) Different output connections offering maximum flexibility for assembly P > N 1000 VAC for 2 sec Protection category IP40 according to IEC 60529 Without earth line choke see FN 9222 data sheet Temperature range (operation and storage) -25 C to +85 C (25/85/21) Custom-specific versions are available on request Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 Flammability corresponding to UL 94 V-2 or better Typical electrical schematic MTBF @ 40C/230V (Mil-HB-217F) 1,610,000 hours Portable electrical and electronic equipment Small to medium-sized machines and household equipment Single-phase power supplies, switch-mode power supplies Test and measurement equipment Medical equipment Rack mounting equipment Typical electrical schematic2 EMC/EMI Products Schaffner Group Datasheets 2014 Filter selection table Filter Rated current Leakage current* Inductance Capacitance Resistance Output connections Weight @ 50 C (25 C) @ 250 VAC/50 Hz L1 L2 Cx Cy R [A] [A] [mH] [mH] [F] [nF] [k] [g] FN 9222Ex-1-06 1 (1.2) 373 12 0.4 0.1 2.2 -06 46 FN 9222Ex-3-06 3 (3.5) 373 2.5 0.4 0.1 2.2 -06 46 FN 9222Ex-6-06 6 (7.2) 373 0.78 0.4 0.1 2.2 -06 46 FN 9222Ex-8-06 8 (10.6) 373 0.5 0.4 0.1 2.2 -06 46 FN 9222Ex-10-06 10 (11.6) 373 0.225 0.1 0.1 2.2 -06 46 FN 9222Ex-12-06 12 (12) 373 0.11 0.1 0.1 2.2 -06 46 FN 9222Ex-15-06 15 (15) 373 0.075 0.1 0.1 2.2 -06 46 FN 9222Ex-12-06HI 12 (12) 373 0.11 0.1 0.1 2.2 -06 46 FN 9222Ex-15-06HI 15 (15) 373 0.075 0.1 0.1 2.2 -06 46 FN 9222ExR-1-06 1 (1.2) 373 12 0.4 0.1 2.2 1000 -06 46 FN 9222ExR-3-06 3 (3.5) 373 2.5 0.4 0.1 2.2 1000 -06 46 FN 9222ExR-6-06 6 (7.2) 373 0.78 0.4 0.1 2.2 1000 -06 46 FN 9222ExR-8-06 8 (10.6) 373 0.5 0.4 0.1 2.2 1000 -06 46 FN 9222ExR-10-06 10 (11.6) 373 0.225 0.1 0.1 2.2 1000 -06 46 FN 9222ExR-12-06 12 (12) 373 0.11 0.1 0.1 2.2 1000 -06 46 FN 9222ExR-15-06 15 (15) 373 0.075 0.1 0.1 2.2 1000 -06 46 FN 9222ExR-12-06HI 12 (12) 373 0.11 0.1 0.1 2.2 1000 -06 46 FN 9222ExR-15-06HI 15 (15) 373 0.075 0.1 0.1 2.2 1000 -06 46 FN 9222ExB-1-06 1 (1.2) 2 12 0.4 0.1 1000 -06 46 FN 9222ExB-3-06 3 (3.5) 2 2.5 0.4 0.1 1000 -06 46 FN 9222ExB-6-06 6 (7.2) 2 0.78 0.4 0.1 1000 -06 46 FN 9222ExB-8-06 8 (10.6) 2 0.5 0.4 0.1 1000 -06 46 FN 9222ExB-10-06 10 (11.6) 2 0.225 0.1 0.1 1000 -06 46 FN 9222ExB-12-06 12 (12) 2 0.11 0.1 0.1 1000 -06 46 FN 9222ExB-15-06 15 (15) 2 0.075 0.1 0.1 1000 -06 46 FN 9222ExB-12-06HI 12 (12) 2 0.11 0.1 0.1 1000 -06 46 FN 9222ExB-15-06HI 15 (15) 2 0.075 0.1 0.1 1000 -06 46 * Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level. Product selector