FN9222RB-20-06 Schaffner

DATASHEET IEC Inlet Filters FN 9222 General Performance IEC Inlet Filter Rated currents up to 20 A Approvals & Compliances Excellent performance/size ratio Optional medical versions (B type) according to IEC/EN 60601-1 Snap-in versions (S and S1 type) Hot inlet versions (HI type) Optional overvoltage protection (Z type) (CQC except HI-types) The FN 9222 IEC inlet filter combines an IEC inlet and mains filter with excellent filter attenuation in a small form factor. Choosing the FN 9222 product line Performance indicators brings you the rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution. Features and benefits Exceptional conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior Technical specifications Rear/front or snap-in mounting Wide mounting flanges available 250 VAC, 50/60 Hz Maximum continuous operating voltage FN 9222 B versions comply with the requirements of Operating frequency DC to 400 Hz 1MOP acc. to IEC/EN 60601-1 for creepage and Rated currents 1 to 20 A 50C clearance, leakage current and high potential Approvals by rated current 1 to 10 A (ENEC, CQC) testing 16 A (ENEC, CQC) for 16 and 20 A types 1 to 20 A (UL, CSA) 12 and 15 A types with hot inlet available High potential test voltage P > PE 2000 VAC for 2 sec (standard types) Optional surge pulse protection P > N 250 VAC for 2 sec (all Z types) Different output connections offering maximum P > N 1000 VAC for 2 sec (1 to 10 A types, not Z types) flexibility for assembly P > PE 2500 VAC for 2 sec (B types) P > N 1100 VDC for 2 sec (16 and 20 A types, not Z Custom-specific versions are available on request types) Protection category IP 40 according to IEC 60529 Typical applications Temperature range (operation and storage) -25C to +85C (25/85/21) Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 (X to XX A, Portable electrical and electronic equipment not Z types) Small to medium-sized machines and household Flammability corresponding to UL 94 V-2 or better equipment Surge pulse protection (Z type) Helps compliance to IEC61000-4-5 (Differential Mode Single-phase power supplies, switch-mode power only) supplies MTBF 40C/230 V (Mil-HB-217F) 15 A: 3,040,000 hours 16 A: 2,256,000 hours Test and measurement equipment Medical equipment Rack mounting equipment2 EMC/EMI Products Schaffner Group Datasheets 09 Feb 2021 Filter selection table Filter Rated current Leakage current* Inductance Capacitance Resistance Output connections Weight 50C (25C) 250 VAC/50 Hz L Cx Cy R ( 120 VAC/60 Hz) A mA mH F nF k g FN9222x-1-.. 1 (1.2) 0.31 (0.18) 12 0.1 2.2 -06 -07 40 FN9222x-3-.. 3 (3.5) 0.31 (0.18) 2.5 0.1 2.2 -06 -07 40 FN9222x-6-.. 6 (7.2) 0.31 (0.18) 0.78 0.1 2.2 -06 -07 40 FN9222x-8-.. 8 (10.6) 0.31 (0.18) 0.5 0.1 2.2 -06 -07 40 FN9222x-10-.. 10 (11.6) 0.31 (0.18) 0.225 0.1 2.2 -06 -07 40 FN9222x-12-.. 12 (12) 0.31 (0.18) 0.11 0.1 2.2 -06 -07 40 FN9222x-15-.. 15 (15) 0.31 (0.18) 0.075 0.1 2.2 -06 -07 40 FN9222x-12-..HI 12 (12) 0.31 (0.18) 0.11 0.1 2.2 -06 -07 40 FN9222x-15-..HI 15 (15) 0.31 (0.18) 0.075 0.1 2.2 -06 -07 40 FN9222xR-1-.. 1 (1.2) 0.31 (0.18) 12 0.1 2.2 1000 -06 -07 40 FN9222xR-3-.. 3 (3.5) 0.31 (0.18) 2.5 0.1 2.2 1000 -06 -07 40 FN9222xR-6-.. 6 (7.2) 0.31 (0.18) 0.78 0.1 2.2 1000 -06 -07 40 FN9222xR-8-.. 8 (10.6) 0.31 (0.18) 0.5 0.1 2.2 1000 -06 -07 40 FN9222xR-10-.. 10 (11.6) 0.31 (0.18) 0.225 0.1 2.2 1000 -06 -07 40 FN9222xR-12-.. 12 (12) 0.31 (0.18) 0.11 0.1 2.2 1000 -06 -07 40 FN9222xR-15-.. 15 (15) 0.31 (0.18) 0.075 0.1 2.2 1000 -06 -07 40 FN9222R-16-06 16 (18.5) 0.31 (0.18) 0.54 0.33 2.2 1000 -06 100 FN9222R-20-06 20 (23) 0.31 (0.18) 0.4 0.33 2.2 1000 -06 100 FN9222xR-12-..HI 12 (12) 0.31 (0.18) 0.11 0.1 2.2 1000 -06 -07 40 FN9222xR-15-..HI 15 (15) 0.31 (0.18) 0.075 0.1 2.2 1000 -06 -07 40 FN9222xB-1-.. 1 (1.2) 0.00 12 0.1 1000 -06 -07 40 FN9222xB-3-.. 3 (3.5) 0.00 2.5 0.1 1000 -06 -07 40 FN9222xB-6-.. 6 (7.2) 0.00 0.78 0.1 1000 -06 -07 40 FN9222xB-8-.. 8 (10.6) 0.00 0.5 0.1 1000 -06 -07 40 FN9222xB-10-.. 10 (11.6) 0.00 0.225 0.1 1000 -06 -07 40 FN9222xB-12-.. 12 (12) 0.00 0.11 0.1 1000 -06 -07 40 FN9222xB-15-.. 15 (15) 0.00 0.075 0.1 1000 -06 -07 40 FN9222RB-16-06 16 (18.5) 0.00 0.54 0.33 1000 -06 100 FN9222RB-20-06 20 (23) 0.00 0.4 0.33 1000 -06 100 FN9222xB-12-..HI 12 (12) 0.00 0.11 0.1 1000 -06 -07 40 FN9222xB-15-..HI 15 (15) 0.00 0.075 0.1 1000 -06 -07 40 FN9222UZ-1-06 1 (1.2) 0.31 (0.18) 12 0.1 2.2 -06 43 FN9222UZ-3-06 3 (3.5) 0.31 (0.18) 2.5 0.1 2.2 -06 43 FN9222UZ-6-06 6 (7.2) 0.31 (0.18) 0.78 0.1 2.2 -06 43 FN9222UZ-8-06 8 (10.6) 0.31 (0.18) 0.5 0.1 2.2 -06 43 FN9222UZ-10-06 10 (11.6) 0.31 (0.18) 0.225 0.1 2.2 -06 43 FN9222UZ-12-06 12 (12) 0.31 (0.18) 0.11 0.1 2.2 -06 43 FN9222UZ-15-06 15 (15) 0.31 (0.18) 0.075 0.1 2.2 -06 43 * Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level.