FN9222S1R-12-06 Schaffner

DATASHEET IEC Inlet Filters FN 9222 General Performance IEC Inlet Filter Rated currents up to 20 A Approvals Excellent performance/size ratio Optional medical versions (B type) according to IEC/EN 60601-1 Snap-in versions (S and S1 type) Hot inlet versions (HI type) Optional overvoltage protection (Z type) (CQC except HI-types) The FN 9222 IEC inlet filter combines an IEC inlet and mains filter with excellent filter attenuation in a small form factor. Choosing the FN 9222 product line brings you the rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution. Features and benefits Exceptional conducted attenuation performance, based on chokes with high saturation resistance Technical specifications and excellent thermal behavior Rear/front or snap-in mounting Maximum continuous operating voltage 250 VAC, 50/60 Hz Wide mounting flanges available Operating frequency dc to 400 Hz Optional medical versions (B type) comply with the Rated currents 1 to 20 A 50 C requirements of IEC/EN 60601-1 for creepage and Approvals by rated current 1 to 10 A (ENEC, CQC) clearance, leakage current and high potential 16 A (ENEC, CQC) for 16 and 20 A types testing 1 to 20 A (UL, CSA) 12 and 15 A types with hot inlet available High potential test voltage P > PE 2000 VAC for 2 sec (standard types) Optional surge pulse protection P > N 1100 VDC for 2 sec (16 and 20 A types, not Z Different output connections offering maximum types) flexibility for assembly P > N 250 VAC for 2 sec (all Z types) Custom-specific versions are available on request P > N 1000 VAC for 2 sec (1 to 10 A types, not Z types) P > PE 2500 VAC for 2 sec (B types) Typical applications Protection category IP40 according to IEC 60529 Portable electrical and electronic equipment Temperature range (operation and storage) -25 C to +85 C (25/85/21) Small to medium-sized machines and household Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 (X to XX equipment A, not Z types) Flammability corresponding to UL 94 V-2 or better Single-phase power supplies, switch-mode power supplies Surge pulse protection (optional) 2 kV, IEC 61000-4-5 Test and measurement equipment MTBF 40C/230V (Mil-HB-217F) 15 A: 3,040,000 hours 16 A: 2,256,000 hours Medical equipment Rack mounting equipment2 EMC/EMI Products Schaffner Group Datasheets 2014 Filter selection table Filter Rated current Leakage current* Inductance Capacitance Resistance Output connections Weight 50 C (25 C) 250 VAC/50 Hz L Cx Cy R A A mH F nF k g FN 9222x-1-.. 1 (1.2) 373 12 0.1 2.2 -06 -07 40 FN 9222x-3-.. 3 (3.5) 373 2.5 0.1 2.2 -06 -07 40 FN 9222x-6-.. 6 (7.2) 373 0.78 0.1 2.2 -06 -07 40 FN 9222x-8-.. 8 (10.6) 373 0.5 0.1 2.2 -06 -07 40 FN 9222x-10-.. 10 (11.6) 373 0.225 0.1 2.2 -06 -07 40 FN 9222x-12-.. 12 (12) 373 0.11 0.1 2.2 -06 -07 40 FN 9222x-15-.. 15 (15) 373 0.075 0.1 2.2 -06 -07 40 FN 9222x-12-..HI 12 (12) 373 0.11 0.1 2.2 -06 -07 40 FN 9222x-15-..HI 15 (15) 373 0.075 0.1 2.2 -06 -07 40 FN 9222xR-1-.. 1 (1.2) 373 12 0.1 2.2 1000 -06 -07 40 FN 9222xR-3-.. 3 (3.5) 373 2.5 0.1 2.2 1000 -06 -07 40 FN 9222xR-6-.. 6 (7.2) 373 0.78 0.1 2.2 1000 -06 -07 40 FN 9222xR-8-.. 8 (10.6) 373 0.5 0.1 2.2 1000 -06 -07 40 FN 9222xR-10-.. 10 (11.6) 373 0.225 0.1 2.2 1000 -06 -07 40 FN 9222xR-12-.. 12 (12) 373 0.11 0.1 2.2 1000 -06 -07 40 FN 9222xR-15-.. 15 (15) 373 0.075 0.1 2.2 1000 -06 -07 40 FN 9222R-16-06 16 (18.5) 373 0.54 0.33 2.2 1000 -06 100 FN 9222R-20-06 20 (23) 373 0.4 0.33 2.2 1000 -06 100 FN 9222xR-12-..HI 12 (12) 373 0.11 0.1 2.2 1000 -06 -07 40 FN 9222xR-15-..HI 15 (15) 373 0.075 0.1 2.2 1000 -06 -07 40 FN 9222xB-1-.. 1 (1.2) 2 12 0.1 1000 -06 -07 40 FN 9222xB-3-.. 3 (3.5) 2 2.5 0.1 1000 -06 -07 40 FN 9222xB-6-.. 6 (7.2) 2 0.78 0.1 1000 -06 -07 40 FN 9222xB-8-.. 8 (10.6) 2 0.5 0.1 1000 -06 -07 40 FN 9222xB-10-.. 10 (11.6) 2 0.225 0.1 1000 -06 -07 40 FN 9222xB-12-.. 12 (12) 2 0.11 0.1 1000 -06 -07 40 FN 9222xB-15-.. 15 (15) 2 0.075 0.1 1000 -06 -07 40 FN 9222RB-16-06 16 (18.5) 2 0.54 0.33 1000 -06 100 FN 9222RB-20-06 20 (23) 2 0.4 0.33 1000 -06 100 FN 9222xB-12-..HI 12 (12) 2 0.11 0.1 1000 -06 -07 40 FN 9222xB-15-..HI 15 (15) 2 0.075 0.1 1000 -06 -07 40 FN 9222UZ-1-06 1 (1.2) 373 12 0.1 2.2 -06 43 FN 9222UZ-3-06 3 (3.5) 373 2.5 0.1 2.2 -06 43 FN 9222UZ-6-06 6 (7.2) 373 0.78 0.1 2.2 -06 43 FN 9222UZ-8-06 8 (10.6) 373 0.5 0.1 2.2 -06 43 FN 9222UZ-10-06 10 (11.6) 373 0.225 0.1 2.2 -06 43 FN 9222UZ-12-06 12 (12) 373 0.11 0.1 2.2 -06 43 FN 9222UZ-15-06 15 (15) 373 0.075 0.1 2.2 -06 43 * Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level.