FN9233R-12-06 Schaffner

DATASHEET IEC Inlet Filters FN9233 High Performance EMC/EMI Filter Rated currents up to 15 A Approvals & Compliances Excellent attenuation performance Complies with IEC/EN 60601-1 Snap-in versions (S and S1 type) Hot inlet versions (HI type) (CQC except HI-types) The FN 9233 IEC inlet filter combines an excellent IEC Performance indicators inlet and mains filter with excellent filter attenuation in a small form factor. Choosing the FN 9233 product line brings you the rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution. For types with additional earth line choke please consult the FN 9233 E data sheet. Technical specifications Features and benefits Exceptional conducted attenuation performance, Maximum continuous operating voltage 250 VAC, 50/60 Hz based on chokes with high saturation resistance Operating frequency DC to 400 Hz and excellent thermal behavior Rated currents 1 to 15 A 50C Rear/front or snap-in mounting 1 to 10 A (ENEC, CQC) Approvals by rated current Optional earth line choke see FN 9233 E data sheet 1 to 15 A (UL, CSA) FN 9233 B versions comply with the requirements of High potential test voltage P > PE 2000 VAC for 2 sec (standard types) P > PE 2500 VAC for 2 sec (B types) 1MOP acc. to IEC/EN 60601-1 for creepage and P > N 1000 VAC for 2 sec clearance, leakage current and high potential Protection category IP 40 according to IEC 60529 testing Temperature range (operation and storage) -25C to +85C (25/85/21) Wide mounting flanges available Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 Different output connections offering maximum Flammability corresponding to UL 94 V-2 or better flexibility for assembly MTBF 40C/230 V (Mil-HB-217F) 2,540,000 hours Custom-specific versions are available on request Typical applications Portable electrical and electronic equipment Small to medium-sized machines and household equipment Single-phase power supplies, switch-mode power supplies Test and measurement equipment Medical equipment Rack mounting equipment2 EMC/EMI Products Schaffner Group Datasheets 05 Jan 2022 Filter selection table Filter Rated current Leakage current* Inductance Capacitance Resistance Output connections Weight 50C (25C) 250 VAC/50 Hz L Cx1 Cx2 Cy Cy ( 120 VAC/60 Hz) A mA mH F F nF k g FN 9233 x-1-06 1 (1.2) 0.31 (0.18) 22.5 0.1 2.2 -06 37 FN 9233 x-3-06 3 (3.5) 0.31 (0.18) 4.6 0.1 2.2 -06 37 FN 9233 x-6-06 6 (7.2) 0.31 (0.18) 1.6 0.1 2.2 -06 37 FN 9233 x-8-06 8 (10.6) 0.31 (0.18) 0.9 0.1 2.2 -06 37 FN 9233 x-10-06 10 (11.6) 0.31 (0.18) 0.45 0.1 2.2 -06 37 FN 9233 x-12-06 12 (12) 0.31 (0.18) 0.27 0.1 2.2 -06 37 FN 9233 x-15-06 15 (15) 0.31 (0.18) 0.2 0.1 2.2 -06 37 FN 9233 x-12-06HI 12 (12) 0.31 (0.18) 0.27 0.1 2.2 -06 37 FN 9233 x-15-06HI 15 (15) 0.31 (0.18) 0.2 0.1 2.2 -06 37 FN 9233 xR-1-06 1 (1.2) 0.31 (0.18) 22.5 0.1 2.2 1000 -06 37 FN 9233 xR-3-06 3 (3.5) 0.31 (0.18) 4.6 0.1 2.2 1000 -06 37 FN 9233 xR-6-06 6 (7.2) 0.31 (0.18) 1.6 0.1 2.2 1000 -06 37 FN 9233 xR-8-06 8 (10.6) 0.31 (0.18) 0.9 0.1 2.2 1000 -06 37 FN 9233 xR-10-06 10 (11.6) 0.31 (0.18) 0.45 0.1 2.2 1000 -06 37 FN 9233 xR-12-06 12 (12) 0.31 (0.18) 0.27 0.1 2.2 1000 -06 37 FN 9233 xR-15-06 15 (15) 0.31 (0.18) 0.2 0.1 2.2 1000 -06 37 FN 9233 xR-12-06HI 12 (12) 0.31 (0.18) 0.27 0.1 2.2 1000 -06 37 FN 9233 xR-15-06HI 15 (15) 0.31 (0.18) 0.2 0.1 2.2 1000 -06 37 FN 9233 xB-1-06 1 (1.2) 0.00 22.5 0.1 1000 -06 37 FN 9233 xB-3-06 3 (3.5) 0.00 4.6 0.1 1000 -06 37 FN 9233 xB-6-06 6 (7.2) 0.00 1.6 0.1 1000 -06 37 FN 9233 xB-8-06 8 (10.6) 0.00 0.9 0.1 1000 -06 37 FN 9233 xB-10-06 10 (11.6) 0.00 0.45 0.1 1000 -06 37 FN 9233 xB-12-06 12 (12) 0.00 0.27 0.1 1000 -06 37 FN 9233 xB-15-06 15 (15) 0.00 0.2 0.1 1000 -06 37 FN 9233 xB-12-06HI 12 (12) 0.00 0.27 0.1 1000 -06 37 FN 9233 xB-15-06HI 15 (15) 0.00 0.2 0.1 1000 -06 37 FN 9233 UF2-1-06 1 (1.2) 0.47 (0.27) 22.5 0.047 0.047 3.3 -06 46 FN 9233 UF2-3-06 3 (3.5) 4.6 0.047 0.047 3.3 -06 46 0.47 (0.27) FN 9233 UF2-6-06 6 (7.2) 1.6 0.047 0.047 3.3 -06 46 0.47 (0.27) FN 9233 UF2-8-06 8 (10.6) 0.9 0.047 0.047 3.3 -06 46 0.47 (0.27) FN 9233 UF2-10-06 10 (11.6) 0.45 0.047 0.047 3.3 -06 46 0.47 (0.27) FN 9233 UF2-12-06 12 (12) 0.27 0.047 0.047 3.3 -06 46 0.47 (0.27) FN 9233 UF2-15-06 15 (15) 0.2 0.047 0.047 3.3 -06 46 0.47 (0.27) * Maximum leakage under normal operating conditions (acc. to IEC60939-3). Note: if the neutral line is interrupted, worst case leakage could reach twice this level.