FN9263-2-06 Schaffner

DATASHEET IEC Inlet Filters FN 9263 General Purpose Power Entry Module with Mains Switch Rated currents up to 10A Approvals 1-pole rocker switch Snap-in versions (S and S1 type) Compact to fit 1U rack size (CQC except HI-types) The FN9263 power entry module combines an IEC inlet, mains filter with excellent filter attenuation and a mains switch in a small form factor. Choosing the FN9263 product line brings you the rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings and mounting possibilities are designed to offer you the desired solution. Features and benefits Exceptional conducted attenuation performance, Technical specifications based on chokes with high saturation resistance and excellent thermal behavior. Rear/front or snap-in mounting. Maximum continuous operating voltage 250 VAC, 50/6 0Hz Operating frequency 50 to 400 Hz Small compact housing fitting 1U rack applications. Rated currents 1 to 10 A 40 C max. Versions up to 10A are available with 1 pole rocker High potential test voltage for capacitors P > PE 2000 VAC for 2 sec switch. P > N 760 VAC for 2 sec Custom-specific versions are available on request. Protection category IP40 according to IEC 60529 Temperature range (operation and storage) -25 C to +85 C (25/85/21) Typical applications Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 Electrical and electronic equipment Flammability corresponding to UL 94 V-2 or better MTBF 40C/230V (Mil-HB-217F) 6,500,000 hours Consumer goods Rocker switch description Household equipment Function 1-pole, dark not illuminated Medical equipment Marking I - 0 Electronic data processing equipment Electrical specifications Inrush current 78 A Office automation and datacom equipment 10,000 on-off operations according to UL 1054, TV 5 Various noisy applications requiring high filter Switch ratings performance Europe (ENEC) 10 A (4 A), 250 VAC* USA (UL) 10 A, 125 VAC 8 A, 250 VAC 1/4 HP Typical electrical schematic Canada (CSA) 10 A, 250 VAC 1/4 HP * Value in () relates to the inductive current charge: cos = 0.65 EMC/EMI Products Schaffner Group Datasheets 2014 Filter selection table Filter Rated current Leakage current* Inductance Capacitance Resistance Output connections Weight 40 C (25 C) 230 VAC/50 Hz L Cx Cy R A A mH F nF k g FN9263x-1-06-y 1 (1.2) 373 5.3 0.1 2.2 1000 -06 55 FN9263x-2-06-y 2 (2.3) 373 2.7 0.1 2.2 1000 -06 55 FN9263x-3-06-y 3 (3.5) 373 2 0.1 2.2 1000 -06 55 FN9263x-4-06-y 4 (4.6) 373 1 0.1 2.2 1000 -06 55 FN9263x-6-06-y 6 (6.9) 373 0.3 0.1 2.2 1000 -06 55 FN9263x-8-06-y 8 (9.2) 373 0.25 0.1 2.2 1000 -06 55 FN9263x-10-06-y 10 (11.5) 373 0.2 0.1 2.2 1000 -06 55 * Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level. Product selector For example: FN 9263-1, FN 9263S-10-06-20, FN 9263S1-6-06-30 Typical filter attenuation Per CISPR 17 A = 50 /50 sym B = 50 /50 asym C = 0.1 /100 sym D = 100 /0.1 sym 1 to 4 A types 6 to 10 A types