FN9264S-2-06 Schaffner

DATASHEET IEC Inlet Filters FN 9264 General Purpose Power Entry Module with Switch Rated currents up to 10 A Approvals & Compliances High quality 2-pole rocker switch Optional reduced leakage current versions (A/B type) Complies with IEC/EN 60601-1 Snap-in versions (S type) Good attenuation performance Features and benefits Excellent conducted attenuation performance, based on chokes with high saturation resistance Performance indicators and good thermal behavior High quality 2-pole rocker switch for all-pole disconnection Faston terminals for easy assembly FN 9264 B versions comply with the requirements of 1MOP acc. to IEC/EN 60601-1 for creepage and clearance, leakage current and high potential testing As flange mount and snap-in types available Typical applications Portable electrical and electronic equipment Technical specifications EDP and office equipment Single-phase power supplies Maximum continuous operating voltage 250 VAC, 50/60 Hz Switch-mode power supplies DC to 400 Hz Operating frequency Test and measurement equipment Rated currents 1 to 10 A 40C max. High potential test voltage for capacitors P > PE 2000 VAC for 2 sec (Standard) Medical electrical devices (MD) and In-Vitro P > PE 2500 VAC for 2 sec (B-types) Diagnostic (IVD) medical devices P > N 760 VAC for 2 sec Protection category IP 40 according to IEC 60529 Typical electrical schematic Temperature range (operation and storage) -25C to +85C (25/85/21) -25C to +85C (25/85/21) Design corresponding to UL 60939-3, CSA Std C22.2 No. 8, IEC/EN 60939-3, GB/ T15287, GB/T15288 Flammability corresponding to UL 94 V-2 or better MTBF 40C/230 V (Mil-HB-217F) 616,000 hours Rocker switch description 2-pole, dark not illuminated Function Marking I 0 Electrical specifications Inrush current 100 A 50,000 on-off operations for 10 A according to EN 610581-1 Switch ratings Europe (ENEC) 10 A (4 A), 250 VAC* 5E4 16 A (4 A), 250 VAC* 1E4 USA (UL) 20 A, 125 VAC 1 HP 250 VAC 2 HP * Value in () relates to the inductive current charge: cos = 0.652 EMC/EMI Products Schaffner Group Datasheets 05 Jan 2022 Filter selection table Filter Rated current Leakage current* Inductance** Capacitance** Resistance** Output Weight 40C (25C) 250 VAC/50 Hz L Cx Cy R connections ( 120 VAC/60Hz) A mA mH F nF k g FN 9264xx-1-06-y 1 (1.2) 0.31 (0.18) 5.15 0.1 2.2 1000 -06 55 FN 9264xx-2-06-y 2 (2.3) 0.31 (0.18) 2.7 0.1 2.2 1000 -06 55 FN 9264xx-3-06-y 3 (3.6) 0.31 (0.18) 2 2.2 1000 -06 55 FN 9264xx-4-06-y 4 (4.6) 0.31 (0.18) 1 0.1 2.2 1000 -06 55 FN 9264xx-6-06-y 6 (6.9) 0.31 (0.18) 0.3 0.1 2.2 1000 -06 55 FN 9264xx-10-06-y 10 (11.5) 0.31 (0.18) 0.21 0.1 2.2 1000 -06 55 *** Leakage current under normal operating conditions (acc. to IEC60939-3). Note: if the neutral line is interrupted, worst case leakage could reach twice this level. *** Tolerances apply: Inductance: -30/+50%, Capacitance: 20%, Resistance: 10% Product selector For example: FN 9264-1-06, FN 9264 B-6-06, FN 9264 SB-4-06-30