FN9264SB-10-06 Schaffner

DATASHEET IEC Inlet Filters FN 9264 Compact filtered power entry module Compact size Approvals Rated currents up to 10 A Complies with IEC/EN 60601-1 High quality 2-pole rocker switch Good attenuation performance Snap-in versions (S type) (CQC except HI-types) Features and benefits Excellent conducted attenuation performance, based on chokes with high saturation resistance and good thermal behavior High quality 2-pole rocker switch for all-pole disconnection Faston terminals for easy assembly Medical version (B type) according IEC/EN60601-1 As flange mount and snap-in types available Typical applications Portable electrical and electronic equipment EDP and office equipment Technical specifications Single-phase power supplies Switch-mode power supplies Maximum continuous operating voltage 250 VAC, 50/60 Hz Test and measurement equipment Operating frequency 50 to 400 Hz Medical electrical devices (MD) and In-Vitro Rated currents 1 to 10 A 40 C max. Diagnostic (IVD) medical devices High potential test voltage for capacitors P > PE 2000 VAC for 2 sec (Standard) P > PE 2500 VAC for 2 sec (B-types) P > N 760 VAC for 2 sec Protection category IP40 according to IEC 60529 Temperature range (operation and storage) -25 C to +85 C (25/85/21) Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 Flammability corresponding to UL 94 V-2 or better MTBF 40C/230V (Mil-HB-217F) 616,000 hours Rocker switch description Function 2-pole, dark not illuminated Marking I 0 Electrical specifications Inrush current 100 A 50,000 on-off operations for 10 A according to EN 610581-1 Switch ratings Europe (ENEC) 10 A (4 A), 250 VAC* 5E4 USA (UL) 20 A, 125 VAC 1 HP 250 VAC 2 HP 16 A (4 A), 250 VAC* 1E4 * Value in () relates to the inductive current charge: cos = 0.652 EMC/EMI Products Schaffner Group Datasheets 2014 Filter selection table Filter Rated current Leakage current* Inductance Capacitance Resistance Output Weight 40C (25C) 250VAC/50Hz L Cx Cy** R connections A A mH F nF k g FN 9264-xx-1-06-y 1 (1.2) 373/2** 5.15 0.1 2.2 1000 -06 55 FN 9264-xx-2-06-y 2 (2.3) 373/2** 2.7 0.1 2.2 1000 -06 55 FN 9264-xx-4-06-y 4 (4.6) 373/2** 1 0.1 2.2 1000 -06 55 FN 9264-xx-6-06-y 6 (6.9) 373/2** 0.3 0.1 2.2 1000 -06 55 FN 9264-xx-10-06-y 10 (11.5) 373/2** 0.21 0.1 2.2 1000 -06 55 * Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level. ** B types without Y2-capacitors Product selector Typical electrical schematic For example: FN 9264-1-06, FN 9264B-6-06, FN 9264SB-4-06-30