IFSE-US3-H05-3100-WF-200 Schaffner

DATA SHEET Power Cords with EMC- Filter IF 13 Power Cord Input EMC Filter IF 13 High frequency attenuation Approvals & Compliances Shielding and ferrite cable Easy to integrate in any design Retrofit for any IEC C14 inlet Rated current up to 10A Various powerline plugs for international usage The IF13 power cord with integrated filter is the easiest way to integrate an EMC filter into a given design (with a power cord). The approach to incorparate the filter in an external cable can help to pass compliance testing at the end of the design phase. The performance of the filter is enhanced through the ferrite cable and shielding. With different versions of input and output connections the cord can be easily implemented. Complying with RoHS and REACH the power cords fulfill Technical Specifications worldwide environmental regulations. 250 VAC (120V for US plug version), 50/60 Hz Features and Benefits Maximum continuous operating voltage 10 A Rated currents Easy to implement, no redesign required IF13-SE: P -> N 1200 VDC (1 min) High potential test voltage EMC lifeline at last design stage P+N -> PE 2100 VDC (1 min) High performance in high frequency range IF13-SE: P+N -> PE 2100 VAC (1 min 50Hz) Retrofit for cord connected devices P -> N 2100 VDC (1 min) no space allocation required for filter IP 20 according IEC 60529 Protection category -25C to +70C Temperature range (operation and storage) Typical Applications IEC C13 according to IEC/EN 60320-2-2 stripped ends Connector (load side) Schuko Plug CEE7/VII Connector (line side) and cables All cord connected applications US NEMA5-15 plug standard Datacenter stripped ends Communication Technology Cable: UL VW-1 Flammability corresponding to Medical and Laboratory devices Security applications High frequency applications Applications with critical housing dimensions (cable is external)2 Power Cords with EMC- Filter Schaffner Group DATA SHEET 05. Jul 2022 Typical Electrical Schematics Schematic without ferrite cable (IF13-US3-SVT-3100-NF-ZZZ) Schematic with ferrite cable and Cy (IF13-US3/EU2-H05-3100-WF-ZZZ) Schematic of dual stage filter (IF13-SE-H05-3100-WF-XXX) Schematic with ferrite cable without Cy (IFSE-US3-H05-3100-WF-200) Filter Selection Table Rated current Leakage current** Inductance Capacitance Resistance Ferrite Input Output Weight Filter* 40C (25C) 250V AC/50 Hz L Cx Cy R Cable*** connection connection (200 cm) ( 120V AC/60 Hz) A mA mH F nF k g 10 0.31 (0.18) 0.8 0.1 2.2 no NEMA5-15 C13 240 IF13-US3-SVT-3100-NF-... 10 0.31 (0.18) 0.8 0.1 2.2 yes NEMA5-15 C13 340 IF13-US3-H05-3100-WF-... 10 0.31 (0.18) 0.8 0.1 2.2 yes CEE7/VII C13 360 IF13-EU2-H05-3100-WF-... 10 0.31 (0.18) 0.8 (2x) 0.1 2.2 1000 yes Stripped Ends C13 410 IF13-SE-H05-3100-WF-... 10 0 0.8 0.1 yes NEMA5-15 Stripped Ends 310 IFSE-US3-H05-3100-WF-... * To compile a complete part number, please replace the -.. with the required length. ** Maximum leakage under usual AC operating conditions (acc. IEC 60939-3). Note: if the neutral line is interrupted, worst case leakage could reach twice this level *** All cable is shielded Product selector IF 13