IL13+ REWIREABLE IEC LOCK Schaffner

DATASHEET Power Cords with Locking System IL 13P Rewireable IEC C13 Locking Connector IL 13P IEC C13 Rewireable Connectors with Locking System Approvals & Compliances Patents: EU Patent No. EP 14594121 Technical specifications Approvals by rated current 1 to 10 A (ENEC) 1 to 15 A (UL, CSA) High potential test voltage P> PE 2000 VAC (1min 50 Hz) P > N 2000 VAC (1min 50 Hz) 250 VAC, 50/60 Hz Maximum continuous operating voltage Protection category IP20 according IEC 60529 Rated currents 0 to 0 50C (480 V filters) Temperature range (operation and storage) -25 C to +70 C The locking system has a tensile force of typical 300N. It is recommended to use it with flange mount filters. Angled Version: For details refer to our Application NoteUsing IEC Lock Power Cords with IEC Inlets and Filter Schaffner power connector with IEC lock guard against accidental disconnection of all electrical appliances with an IEC inlet. No exchange or modification of the IEC inlet or IEC inlet filter system is needed. Easy retrofit for all electronic equipments and devices. Features and benefits Power cord connector with locking system for IEC inlets Suitable for use with any C14 IEC inlet Fits the complete Schaffner IEC inlet filter program with C14 IEC inlet Max. pin temperature 70 C Typical applications Data centers Industrial equipment Medical devices In-vitro diagnostic devices Broadcasting stations Mobile applications2 EMC/EMI Products Schaffner Group Datasheets 12 Dec 2019 There are different Versions available (straight and angled), please select the Ordercode in the table below: Straight Version Rewireable Connector (not PSE approved): 815763 Rewireable Connector (PSE approved): 816590 Angled Version Up/Down Angled Rewireable Connector: 820893 Left/Right Angled Rewireable Connector: 820892 The nominal torque value for the terminal screws is 0.4Nm. The strain relief clamping screws should be tightened with 0.3Nm. Additional instruction manual is available on request. Straight Rewirable IEC Lock+ Appliance Outlet Front Top Side Down (& Up) Angled Rewirable IEC Lock+ Appliance Outlet Front Back Top Side Right (& Left) Angled Rewirable IEC Lock+ Appliance Outlet Front Back Top Side All dimensions in mm 1 inch = 25.4 mm Tolerances according: ISO 2768-m/EN 22768-m