DATASHEET Common-mode Chokes RN series
Current-compensated Chokes
Rated currents from 0.3 to 10 A Approvals
DC to 400 Hz frequency
100 kHz to 3 MHz common-mode resonance
frequency
Dual-choke configurations
Multiple PCB-mounting options
RN chokes are attenuating common-mode or
asymmetric (P/N > E) interference signals, by being
connected in series with the phase and neutral lines
Performance indicators
of an AC powerline input. Symmetrical components
of the noise are also attenuated by the leakage
inductance (stray inductance) of the windings. These
chokes are typically used in conjunction with
suppression capacitors.
Features and benefits
High saturation resistance and excellent thermal
behavior
Through hole pin connections
Dual-choke configuration
Technical specifications
Small compact design
Multiple housing options
Operating voltage 300 VAC
Custom-specific versions are available on request
Operating frequency DC to 400 Hz
Higher temperature versions
Rated currents 0.3 to 10 A @ rated ambient temperature
Fully potted design usable for ruggedized
Rated inductance 0.4 to 100 mH
applications
Stray inductance Typically 1% of L
N
Inductance reduction (DC bias with IN) Less than 10% (25C)
Typical applications
High potential test voltage winding-to- 1500 VAC, 60 sec, guaranteed
1500 VAC, 2 sec, factory test
winding @ 25C
Switch-mode power applications
winding-to-housing @ 25C 4000 VAC, 60 sec, guaranteed
Suppressing common-mode interference levels
MTBF @ 40C/230 V (Mil-HB-217F) >5,000,000 hours
EMI input filters
Surge current @ 10 msec 20 x I @ 25C
N
For suppression-equipment with no earth
Temperature range (operation and storage) -40C to 100C (40/100/56)
connection
acc. IEC 60068-1
Phase-angle control circuits in combination with
Flammability corresponding to Potting compound UL 94V-0
saturating chokes
Housing UL 94V-0
Ringcore coating UL 94V-0
Design corresponding to UL 1283, IEC/EN 60938-1
Typical electrical schematic2 EMC/EMI Products Schaffner Group Datasheets 28 Jan 2020
Choke selection table
Choke Current @ ambient Inductance Resistance A B H Weight
(l )
N temperature (L ) (R )
N DC
[A] [C] [mH] [mOhm] [mm] [mm] [mm] (g)
RN 102-0.3-02-22M 0.3 40 22.0 1300 10.0 10.0 9.0 4 buy
RN 102-0.3-02-12M 0.3 40 12.0 1100 10.0 10.0 9.0 3 buy
RN 102-0.6-02-4M4 0.6 40 4.4 380 10.0 10.0 9.0 3
RN 102-1-02-3M0 1.0 40 3.0 210 10.0 10.0 9.0 3
RN 102-1.5-02-1M6 1.5 40 1.6 94 10.0 10.0 9.0 3
RN 102-2-02-1M1 2.0 40 1.1 70 10.0 10.0 9.0 3
RN 112-0.4-02-39M 0.4 40 39.0 1500 15.0 10.0 12.6 6
RN 112-0.4-02-27M 0.4 40 27.0 1400 15.0 10.0 12.6 6
RN 112-0.5-02-27M 0.5 40 27.0 1200 15.0 10.0 12.6 6
RN 112-0.5-02-18M 0.5 40 18.0 1100 15.0 10.0 12.6 6
RN 112-0.5-02-15M 0.5 40 15.0 700 15.0 10.0 12.6 6
RN 112-0.6-02-15M 0.6 40 15.0 490 15.0 10.0 12.6 6
RN 112-0.8-02-10M 0.8 40 10.0 380 15.0 10.0 12.6 6
RN 112-1.2-02-6M8 1.2 40 6.8 250 15.0 10.0 12.6 6
RN 112-1.5-02-3M3 1.5 40 3.3 102 15.0 10.0 12.6 6
RN 112-2-02-1M8 2.0 40 1.8 74 15.0 10.0 12.6 6
RN 112-2-02-1M0 2.0 40 1.0 70 15.0 10.0 12.6 6
RN 112-2.6-02-0M4 2.6 40 0.4 40 15.0 10.0 12.6 6
RN 112-3.6-02-0M4 3.6 40 0.4 27 15.0 10.0 12.6 6
RN 112-4-02-0M7 4.0 40 0.7 24 15.0 10.0 12.6 6
RN 114-0.3-02-47M 0.3 40 47.0 1700 20.1 12.5 13.2 10
RN 114-0.5-02-39M 0.5 40 39.0 830 20.1 12.5 13.2 11
RN 114-0.8-02-27M 0.8 40 27.0 500 20.1 12.5 13.2 11
RN 114-1-02-15M 1.0 40 15.0 370 20.1 12.5 13.2 10
RN 114-1.2-02-10M 1.2 40 10.0 195 20.1 12.5 13.2 10
RN 114-1.5-02-6M8 1.5 40 6.8 123 20.1 12.5 13.2 11
RN 114-2-02-4M2 2.0 40 4.2 100 20.1 12.5 13.2 11
RN 114-2.5-02-3M3 2.5 40 3.3 72 20.1 12.5 13.2 11
RN 114-3-02-2M0 3.0 40 2.0 52 20.1 12.5 13.2 10
RN 114-4-02-1M5 4.0 40 1.5 34 20.1 12.5 13.2 11
RN 116-0.5-02-47M 0.5 60 47.0 960 20.1 12.5 13.2 11
RN 116-0.5-02-39M 0.5 60 39.0 920 20.1 12.5 13.2 11
RN 116-0.5-02-27M 0.5 60 27.0 790 20.1 12.5 13.2 11
RN 116-0.8-02-27M 0.8 60 27.0 370 20.1 12.5 13.2 13
RN 116-1-02-15M 1.0 60 15.0 260 20.1 12.5 13.2 12
RN 116-1-02-10M 1.0 60 10.0 210 20.1 12.5 13.2 11
RN 116-1.3-02-6M8 1.3 60 6.8 140 20.1 12.5 13.2 12
RN 116-1.5-02-10M 1.5 60 10.0 148 20.1 12.5 13.2 12
RN 116-1.7-02-4M0 1.7 60 4.0 87 20.1 12.5 13.2 12
RN 116-2-02-3M3 2.0 60 3.3 70 20.1 12.5 13.2 12
RN 116-2-02-2M2 2.0 60 2.2 66 20.1 12.5 13.2 11
RN 122-0.5-02-56M 0.5 40 56.0 1800 25.0 15.0 16.5 20
RN 122-0.6-02-47M 0.6 40 47.0 1300 25.0 15.0 16.5 20
RN 122-0.8-02-39M 0.8 40 39.0 1000 25.0 15.0 16.5 20
RN 122-1-02-18M 1.0 40 18.0 630 25.0 15.0 16.5 19
RN 122-1-02-10M 1.0 40 10.0 560 25.0 15.0 16.5 19
RN 122-1.5-02-10M 1.5 40 10.0 250 25.0 15.0 16.5 20
RN 122-2-02-6M8 2.0 40 6.8 156 25.0 15.0 16.5 20
RN 122-2-02-5M0 2.0 40 5.0 140 25.0 15.0 16.5 21
RN 122-2.5-02-5M6 2.5 40 5.6 110 25.0 15.0 16.5 20
RN 122-3-02-4M5 3.0 40 4.5 80 25.0 15.0 16.5 21
RN 122-4-02-3M3 4.0 40 3.3 46 25.0 15.0 16.5 22
RN 122-4-02-1M8 4.0 40 1.8 42 25.0 15.0 16.5 22