RT8532-20-2M5 Schaffner

Common Mode Chokes RT series DATA SHEET Current-compensated Chokes Rated currents from 6 to 20 A Approvals & Compliances Up to 600 VAC and VDC 2- and 3-wire configurations Horizontal and vertical PCB mounting types Ruggedized saturation and thermal behavior RT common-mode chokes are mainly used to filter Open construction for forced and convection EMI noise on AC power lines up to 600 VAC. EMI cooling noise of electronic equipment can go to the power Straightforward pin-out for easy PCB design lines and disturb the proper function of other devices like communication devices or control logic of robotics. Thus noise generated by the equipment from switched power electronics or by high slew rates of controllers needs to be filtered. RT common-mode chokes are used to suppress EMI noise in PCB integrated filter designs with line bypass capacitors or in combination with single phase filters for extra low leakage filter designs. Performance indicators Features and Benefits Cost-effective PCB designs for up to 32 A with forced cooling * Compact size and light weight Low magnetic leakage flux Excellent winding insulation Standardized foot print Broad range of inductance ratings Custom-specific versions on request Typical Applications Technical Specifications AC and DC filtering for midsize power range drives, photovoltaic inverters, fast chargers, 600 VAC (3-line) and 300 VAC/425 VDC (2-line) Maximum continuous operating voltage charging stations, UPS and switch mode power dc to 400 Hz Operating frequency supplies 2500 VAC, 60 sec, guaranteed, 2 sec factory test High potential test voltage winding-to- Filter with low leakage current noise or improved winding 25C immunity against grid disturbances -40C to +100C (40/100/56) Temperature range (operation and storage) Electronic devices, automation and (industrial) UL 94 V-0 Flammability corresponding to LED lighting convection/forced cooling Cooling Communication devices >5,000,000 hours MTBF 40C/230 V (Mil-HB-217F) Medical and laboratory Equipment 6 to 20 A Converters Rated currents Typical electrical schematic2 Common Mode Chokes Schaffner Group DATA SHEET 15. Jun 2022 RT Series Buy convection *forced cooling Inductance **typ. Inductance Resistance Choke *** Pin Weight Selection table cooling nominal 3 m/s nominal Ln 25C Ls 25C R 25C current 60C current 60C 100kHz 100kHz 0.1 A A mH/path H/path m/path size P mm g 6 9.5 10 30 33 1 1.1 80 RT8122-6-10M0 8 12.5 8 24.8 21 1 1.3 80 RT8122-8-8M0 10 16 6 19.2 16 1 1.4 80 RT8122-10-6M0 12 19 5 20.5 14 2 1.5 100 RT8122-12-5M0 16 27 4 17.6 10 2 1.8 110 RT8122-16-4M0 20 32 3 13.5 7 3 2 160 RT8122-20-3M0 RT8522-6-10M0 6 9.5 10 31.5 33 4 1.1 70 8 12.5 8 24 21 4 1.3 80 RT8522-8-8M0 10 16 6 19.2 16 4 1.4 80 RT8522-10-6M0 12 19 5 23 14 5 1.5 90 RT8522-12-5M0 16 27 4 18.8 10 5 1.8 110 RT8522-16-4M0 RT8522-20-3M0 20 32 3 13.5 7 6 2.0 150 6 9.5 6 18 27 7 1.1 80 RT8132-6-6M0 8 12.5 4.8 14.9 17 7 1.3 90 RT8132-8-4M8 10 16 4 16 15 8 1.5 110 RT8132-10-4M0 12 19 3.6 14.4 12 8 1.6 120 RT8132-12-3M6 16 27 3 12 8 9 1.8 170 RT8132-16-3M0 20 32 2.5 10 7 9 2.1 190 RT8132-20-2M5 6 9.5 6 18 27 10 1.1 90 RT8532-6-6M0 8 12.5 4.8 13.9 17 10 1.3 90 RT8532-8-4M8 10 16 4 16 15 11 1.5 110 RT8532-10-4M0 RT8532-12-3M6 12 19 3.6 15.1 12 11 1.6 120 16 27 3 13.8 8 12 1.8 160 RT8532-16-3M0 20 32 2.5 10.8 7 12 2.1 190 RT8532-20-2M5 Test conditions: Inductance tolerance: +50%, 30% Resistance tolerance: +15% 25C Electrical characteristics 25C: 2C * typical current for forced cooling with 3 m/s. Due to the possible turbulences and degradation of the air stream within an equipment please consider thermal validation. ** typical stray inductance, max is 0.1% of Ln *** Length of pin (Dimension P) is always 5.5 mm 1 Product selector Examples: RT8532-16-3M0: Vertical 3-line choke for 16 A, with 3 mH RT8122-20-3M0: Horizontal 2-line choke for 20 A, with 3 mH