ABT7PDU010G Schneider

Product data sheet ABT7PDU010G Characteristics voltage transformer - 230..400 V - 2 x 115 V - 100 VA Main Range of product Phaseo Universal Product or component Safety and isolation transformer type Rated power in VA 100 VA Input voltage 230 V AC single phase , terminal(s): N-L1 400 V AC phase to phase , terminal(s): L1-L2 Output voltage 115/230 V AC Secondary winding Double Protective cover With Complementary Input voltage limits 207...253 V 360...440 V Network frequency limits 47...63 Hz Input voltage tolerance +/- 15 V Efficiency 86 % Power dissipation in W 16.3 W Voltage variation at nominal load 4 % at 230 V 4.17 % at 400 V Output sustained overvoltage 4.9 % (no load, hot state) Voltage drop at rated load 4.23 % No load losses 11.26 W Short-circuit voltage 6.20 % Output protection type Against overload , protection technology: external Against overvoltage , protection technology: external Against short-circuits , protection technology: external Connections - terminals Screw type terminals for input connection , connection capacity: 5 x 4 mm AWG gauge11 Screw type terminals for input ground connection , connection capacity: 1 x 4 mm AWG gauge11 Screw type terminals for output connection , connection capacity: 4 x 4 mm AWG gauge11 Marking CE Fixing mode By 4 screws , screw(s) = 5.5 mm on vertical panel , operating position: vertical By 4 screws , screw(s) = 5.5 mm on vertical panel , operating position: horizontal By 4 screws , screw(s) = 5.5 mm on horizontal panel with derating to 90 % By clips on 35 x 15 mm symmetrical DIN rail Output coupling Grounding of secondary Parallel Series by internal jumper Electrical insulation class Class B Status LED 1 LED orange for input voltage Product weight 2.86 kg 7/11/2011 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Environment Product certifications ENEC CURus IP degree of protection IP20 conforming to EN/IEC 60529 Ambient air temperature for operation -20...60 C Ambient air temperature for storage -40...80 C Relative humidity 0...95 % during operation Class of protection against electric shock Class I conforming to VDE 0106-1 Dielectric strength 3200 V between input and ground 3200 V between output and ground 5100 V between input and output RoHS EUR conformity date 0501 RoHS EUR status Compliant 2