Product data sheet ATV950D15N4 Characteristics variable speed drive - ATV950 - 15kW - 400/480V- with braking unit - IP55 Main Range of product Altivar Process ATV900 Product or component type Variable speed drive Device application Industrial application Device short name ATV950 Variant Standard version With braking chopper Product destination Asynchronous motors Synchronous motors Mounting mode Wall mount EMC filter Integrated conforming to EN/IEC 61800-3 category C2 with 50 m motor cable maxi Integrated conforming to EN/IEC 61800-3 category C3 with 150 m motor cable maxi IP degree of protection IP55 conforming to IEC 61800-5-1 IP55 conforming to IEC 60529 Type of cooling Forced convection Supply frequency 50...60 Hz (+/- 5 %) Network number of phases 3 phases Us rated supply voltage 380...480 V (- 15...10 %) Motor power kW 15 kW (normal duty) 11 kW (heavy duty) Motor power hp 20 hp (normal duty) 15 hp (heavy duty) Line current 27 A at 380 V (normal duty) 23.3 A at 480 V (normal duty) 20.6 A at 380 V (heavy duty) 18.1 A at 480 V (heavy duty) Prospective line Isc 50 kA Apparent power 19.4 kVA at 480 V (normal duty) 15 kVA at 480 V (heavy duty) Continuous output current 31.7 A at 4 kHz (normal duty) 23.5 A at 4 kHz (heavy duty) Maximum transient current 35.3 A during 60 s (heavy duty) 38 A during 60 s (normal duty) Asynchronous motor control profile Variable torque standard Optimized torque mode Constant torque standard Synchronous motor control profile Permanent magnet motor Dec 28, 2017 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applicationsSpeed drive output frequency 0.1...599 Hz Nominal switching frequency 4 kHz Switching frequency 2...16 kHz adjustable 4...16 kHz with derating factor Safety function STO (safe torque off) SIL 3 Discrete input logic 16 preset speeds Communication port protocol Ethernet/IP Modbus TCP Modbus serial Option card Slot A : communication module for Profibus DP V1 Slot A : communication module for Profinet Slot A : communication module for DeviceNet Slot A : communication module for CANopen daisy chain RJ45 Slot A : communication module for CANopen SUB-D 9 Slot A : communication module for CANopen screw terminals Slot A : communication module for EtherCAT Slot A/slot B/slot C : digital and analog I/O extension module Slot A/slot B/slot C : output relay extension module Slot B : 5/12 V digital encoder interface module Slot B : analog encoder interface module Slot B : resolver encoder interface module Complementary Output voltage <= power supply voltage Motor slip compensation Adjustable Not available in permanent magnet motor law Automatic whatever the load Can be suppressed Acceleration and deceleration ramps Linear adjustable separately from 0.01...9999 s Braking to standstill By DC injection Protection type Motor : thermal protection Motor : safe torque off Motor : motor phase break Drive : thermal protection Drive : safe torque off Drive : overheating Drive : overcurrent between output phases and earth Drive : overload of output voltage Drive : short-circuit protection Drive : motor phase break Drive : overvoltages on the DC bus Drive : line supply overvoltage Drive : line supply undervoltage Drive : line supply phase loss Drive : overspeed Drive : break on the control circuit Frequency resolution Display unit : 0.1 Hz Analog input : 0.012/50 Hz Electrical connection Line side, screw terminal : 10...16 mm (AWG 8...AWG 6) Motor, screw terminal : 10...16 mm (AWG 8...AWG 6) Control, screw terminal : 0.5...1.5 mm (AWG 20...AWG 16) DC bus, screw terminal : 10...16 mm (AWG 8...AWG 6) Connector type 2 RJ45 (on the control block) for Ethernet IP/Modbus TCP 1 RJ45 (on the control block) for Modbus serial Physical interface 2-wire RS 485 for Modbus serial Transmission frame RTU for Modbus serial Transmission rate 10/100 Mbit/s for Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial Exchange mode Half duplex, full duplex, autonegotiation for Ethernet IP/Modbus TCP Data format 8 bits, configurable odd, even or no parity for Modbus serial Type of polarization No impedance for Modbus serial Number of addresses 1...247 for Modbus serial Method of access Slave for Modbus TCP 2