BMXAMM0600 Schneider

Product data sheet BMXAMM0600 Characteristics analog I/O module M340 - 4 inputs - 2 outputs - high level Main Range of product Modicon M340 automation platform Product or component Mixed analog I/O module type Electrical connection 1 connector 20 ways Input output isolation Non isolated Input level High level Analogue input number 4 Analogue input type Voltage 1...5 V Voltage 0...5 V Voltage 0...10 V Voltage +/- 10 V Current 4...20 mA Current 0...20 mA Complementary Analogue input resolution 14 bits +/- 10 V 13 bits 0...10 V 12 bits 4...20 mA 12 bits 1...5 V 12 bits 0...5 V 12 bits 0...20 mA Permitted overload on inputs +/- 30 V 1...5 V +/- 30 V 0...5 V +/- 30 V 0...10 V +/- 30 V +/- 10 V +/- 30 mA 4...20 mA +/- 30 mA 0...20 mA Internal conversion resistor 250 Ohm Precision of internal conversion resistor 0.1 % - 15 ppm/C Type of filter First order digital filtering by firmware Fast read cycle time 1 ms + 1 ms x number of channels used Nominal read cycle time 5 ms for 4 channels Measurement error 0.35 % of full scale 4...20 mA 25 C 0.35 % of full scale 0...20 mA 25 C 0.25 % of full scale 1...5 V 25 C 0.25 % of full scale 0...5 V 25 C 0.25 % of full scale 0...10 V 25 C 0.25 % of full scale +/- 10 V +/- 10 V 25 C <= 0.6 % of full scale 4...20 mA 0...60 C <= 0.6 % of full scale 0...20 mA 0...60 C <= 0.6 % of full scale +/- 10 V 0...60 C <= 0.5 % of full scale 4...20 mA 0...60 C <= 0.5 % of full scale 0...20 mA 0...60 C <= 0.35 % of full scale 1...5 V 0...60 C <= 0.35 % of full scale 0...5 V 0...60 C <= 0.35 % of full scale 0...10 V 0...60 C <= 0.35 % of full scale +/- 10 V 0...60 C 0.25 % of full scale 4...20 mA 25 C 0.25 % of full scale 0...20 mA 25 C Temperature drift 50 ppm/C 4...20 mA 50 ppm/C 0...20 mA 30 ppm/C 1...5 V 30 ppm/C 0...5 V 30 ppm/C 0...10 V 30 ppm/C +/- 10 V 100 ppm/C 4...20 mA 100 ppm/C 0...20 mA 100 ppm/C +/- 10 V Recalibration Factory calibrated on outputs Internal on inputs Mar 9, 2013 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Isolation voltage 750 V DC between group of I/O channels 1400 V DC between channels and bus 1400 V DC between channels and ground Output level High level Analogue output number 2 Analogue output type Voltage +/- 10 V Current 4...20 mA Current 0...20 mA Analogue output resolution 12 bits +/- 10 V 11 bits 4...20 mA 11 bits 0...20 mA Conversion time <= 2 ms Maximum conversion value 0...30 mA 4...20 mA 0...30 mA 0...20 mA 0...24 mA 4...20 mA 0...24 mA 0...20 mA +/- 11.25 V 1...5 V +/- 11.25 V 0...5 V +/- 11.25 V 0...10 V +/- 11.25 V +/- 10 V +/- 10 V Fallback mode Configurable Predefined Status LED 1 LED red I/O 1 LED red ERR 1 LED per channel green channel diagnostic 1 LED green RUN Product weight 0.155 kg Current consumption 130 mA at 24 V DC 150 mA at 3.3 V DC Environment Ambient air temperature for operation 0...60 C Relative humidity 10...95 % without condensation IP degree of protection IP20 Protective treatment TC 2