Push Buttons and Operator Interface Specifiers Guide XVP Illuminated Indicating Banks Supplement Class 9001 CONTENTS Description Page XVP Characteristics 2 XVP Bank Components . 3 XVP Accessories 5 XVP Wiring Diagram 5 Schneider Electric Brands XVP Dimensions . 6XVP Illuminated Indicating Banks Characteristics CHARACTERISTICS Environment Product certifications UL Listed, CSA Certified File E164353 File LR 44087 File E164353 CCN NKCR Class 3211 03 CCN NKCR 2 Conforming to standards CE Marked IEC/EN 60947-5-1. UL 508 Protective Treatment TC Ambient Air Temperature (Storage) 40 to + 158 F 40 to +70 C Operation Illuminated lens unit, steady, 13 to +122 F (25 to +50 C) with LED or 7 W incandescent bulb Flashing Units with LED or 7 W incandescent bulb Units with Strobe Audible Sounder Units Electric Shock Protection Tube mounting Class 1 conforming to IEC 536 Direct mounting on base unit Class 2 Degree of Protection To IEC 60529 and NF C 20-010 IP 65 To UL 50 and CSA 22.2 No. 94 Type 1, 12, 13 Material Illuminated lens unit Polycarbonate Base unit and top cover ABS + Polycarbonate Ring on lens and base Polyamide Tube mounting Aluminum Tulip ABS + Polycarbonate Electrical Characteristics Rated Insulation Voltage (UL) Conforming to IEC 60947-1 250 Vac Consumption LED unit 24 Vac/Vdc: <60 mA 120230 Vac: <20 mA Steady Incandescent bulb 7W 24 Vac/Vdc: <300 mA 120230 Vac: 6535 mA Flashing 24 Vac or 24 Vdc <250 mA 120230 Vac < 30mA Unit with strobe (on energization) 24 Vdc: 0.3 Joules, 40 mA 120 Vac: 0.6 Joules, 20mA 230 Vac: 0.6 Joules, 11mA Audible sounder units 24 Vdc, 12 mA 120 Vac, 15 mA 230 Vac, 15 mA Rated Impulse withstand voltage Conforming to IEC 60947-1 U imp = 4 kV Bulb type Illuminated units, steady or flashing Bayonet type BA 15d 5 W minimum power 7 W maximum power Illuminating Power Strobe Units 0.3 Joules, 24 Vdc, 1.2 cd 0.6 Joules, 120 Vac, 5.0 cd 0.6 Joules, 230 Vac, 5.0 cd Audible sounder units Signal At one meter: 7585 dB Terminal marking Common 1 terminal marked /N Depending on type of units 1 to 5 terminals marked 1+/L to 5+/L Ground Marked with grounding symbol 2 Cable size Maximum wire size 2 x 16 AWG (1.5 mm ) with cable end Terminals Torque requirement Removable and captive screw terminals: 4.4 lb-in (0.5 Nm) Ring tongue connectors Burndy YAV14RL33 Wire: 2014 AWG Studs: 46 Width: 0.25 in. Frequency of Illuminated units Strobe Units 0.7 Hz2.0 Hz Specific Characteristics of Protected LED Bulbs Voltage limits Nominal voltage 24 V: 19.2 to 30 Vdc 21.6 to 24.6 Vac 120 V: 100 to 132 Vac 240 V: 200 to 264 Vac Current consumption Applicable to all colors 24 Vac/Vdc supply: 24 mA 120 Vac supply: 18 mA 240 Vac supply: 18 mA Service life At nominal voltage and at an ambient temperature of 77 F (25 C) 100,000 hours Surge withstand Conforming to IEC 61000-4-5 1 kV (differential) Resistance to fast transients Conforming to IEC 61000-4-4 2 kV Resistance to electromagnetic fields Conforming to IEC 61000-4-3 10 V/m Resistance to electrostatic discharges Conforming to IEC 61000-4-2 8/6 kV Electromagnetic emission Conforming to EN 55011 Class B 2 2001 Schneider Electric All Rights Reserved 11/01