Product data sheet HMISAC Characteristics Rear Module Controller panel - Dig 16 inputs/10 outputs Product availability: Non-Stock - Not normally stocked in distribution facility Main Range of product Magelis SCU Product or component Controller type Device presentation Basic element Complementary Supply External source Us rated supply voltage 24 V at 20.4...28.8 V DC Immunity to microbreaks <= 10 ms Inrush current <= 30 A Power consumption in W 15 W Local signalling No indicator Number of pages Limited by internal memory capacity Software designation SoMachine Operating system Magelis Processor name CPU RISC Processor frequency 333 MHz Memory description 128 MB flash memory, type: NAND 128 kB internal data storage memory, type: FRAM 128 MB application run memory, type: DRAM Integrated connection type 1 RJ45 connector serial link with RS232/RS485 interface at <= 115.2 kbits/s 1 RJ45 connector Ethernet TCP/IP 1 USB 2.0 type mini B 1 USB 2.0 type A SUB-D 9 connector CANopen master bus Realtime clock Built-in Downloadable protocols CANopen Modbus TCP/IP Modbus Fixing mode By 1 nut - diameter: 22 mm, mounting on: 1...6 mm thick panel Enclosure material PC/PBT Shock resistance 147 m/s (duration=11 ms) conforming to IEC 60068-2-27 on DIN rail 294 m/s (duration=6 ms) conforming to IEC 60068-2-27 on panel mounting Vibration resistance +/- 3.5 mm (f=5...9 Hz) conforming to IEC 60068-2-6 1 gn (f=9...150 Hz) conforming to IEC 60068-2-6 Aug 11, 2019 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Electromagnetic compatibility Electrostatic discharge immunity test - test level: 8 kV, air discharge conforming to IEC 61000-4-2 Electrostatic discharge immunity test - test level: 6 kV, contact discharge con- forming to IEC 61000-4-2 Susceptibility to electromagnetic fields - test level: 10 V/m, 80 MHz...3 GHz con- forming to IEC 61000-4-3 Electrical fast transient/burst immunity test - test level: 2 kV, power lines conform- ing to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 1 kV, between analogue I/ O and operating voltage conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 2 kV, relay wires conform- ing to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 1 kV, Ethernet line con- forming to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 1 kV, COM line conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 1 kV, CAN line conforming to IEC 61000-4-4 Surge immunity test - test level: 2 kV, power supply (common mode) conforming to IEC 61000-4-5 Surge immunity test - test level: 1 kV, power supply (differential mode) conform- ing to IEC 61000-4-5 Surge immunity test - test level: 1 kV common mode, digital I/O conforming to IEC 61000-4-5 Surge immunity test - test level: 0.5 kV differential mode, digital I/O conforming to IEC 61000-4-5 Conducted RF disturbances - test level: 10 V, 0.15...80 MHz conforming to IEC 61000-4-6 Conducted emission - test level: 150 kHz...30 MHz conforming to EN 55011 Radiated emission - test level: 30 MHz...1 GHz conforming to EN 55011 Discrete input number 2 fast input (normal mode) conforming to IEC 61131-2 Type 1 14 digital input conforming to IEC 61131-2 Type 1 Discrete input voltage 24 V DC discrete input logic:sink or source (positive/negative) Number of common point 1 fast input (HSC mode) 2 digital input Discrete input current 7.83 mA fast input 5 mA digital Input impedance 4.7 kOhm 2.81 kOhm Sensor power supply 15...28.8 V DC, voltage (state 1): >= 15 V, current (state 1): >= 5 mA, voltage (state 0): <= 5 V, current (state 0): <= 1.5 mA 15...28.8 V DC, voltage (state 1): >= 15 V, current (state 1): >= 2.5 mA, voltage (state 0): <= 5 V, current (state 0): <= 1 mA Configurable filtering time 0 ms no filter (none) 0.004...0.04 ms bounce filter (latch/event and cumulative filter by step Nx0.5ms (64>=N>=2)) 3...12 ms integrator (none/run/stop) Input frequency 100 kHz for fast input (encoder mode) - control type A/B 100 kHz for fast input - control type single phase 100 kHz for fast input - control type pulse/direction Cable distance between devices Shielded cable: 10 m for fast input Shielded cable: 100 m for digital input Unshielded cable: 50 m for digital input Connection pitch 0.14 in (3.5 mm) Overvoltage protection With Isolation between channels and internal logic 500 V DC Isolation between channels None Discrete output number 2 fast output (normal mode), output logic: source 8 digital output, output logic: source Discrete output voltage 24 V DC (voltage limit: 19.2...28.8 V) with transistor discrete output(s) 24 V DC (voltage limit: 5...30 V) with relay discrete output(s) 220 V AC (voltage limit: 100...250 V) with relay discrete output(s) Input/output number 2 fast input, terminal(s): FI0...FI1 14 digital input, terminal(s): DI0...DI13 2 fast output, terminal(s): FQ0...FQ1 8 digital output, terminal(s): DQ0...DQ7 Discrete output current 300 mA, response time 2 ms fast output (normal mode) 50 mA, response time 2 ms fast output (PWM or PTO mode) 2 A (current per output common:4 A), response time 5 ms with opening contact for digital output 2 A (current per output common:4 A), response time 2 ms with closing contact for digital output 2