LC1DT60AU7 Schneider

Product data sheet LC1DT60AU7 Characteristics TeSys D contactor - 4P(4 NO) - AC-1 - <= 440 V 60 A - 240 V AC 50/60 Hz coil Product availability : Non-Stock - Not normally stocked in distribution facility Main Range of product TeSys D Range TeSys Product name TeSys D Product or component type Contactor Device short name LC1D Contactor application Resistive load Utilisation category AC-1 Poles description 4P Pole contact composition 4 NO System Voltage <= 300 V DC power circuit <= 690 V AC 25...400 Hz power circuit Ie rated operational current 60 A (<= 140 F (60 C)) at <= 440 V AC AC-1 power circuit Control circuit type AC 50/60 Hz Uc control circuit voltage 240 V AC 50/60 Hz Auxiliary contact composition 1 NO + 1 NC Uimp rated impulse withstand voltage Conforming to IEC 60947 Overvoltage category III Ith conventional free air thermal 60 A at <= 140 F (60 C) power circuit current 10 A at <= 140 F (60 C) signalling circuit Irms rated making capacity 800 A at 440 V power circuit conforming to IEC 60947 140 A AC signalling circuit conforming to IEC 60947-5-1 250 A DC signalling circuit conforming to IEC 60947-5-1 Rated breaking capacity 800 A at 440 V power circuit conforming to IEC 60947 Icw rated short-time withstand current 100 A 1 s signalling circuit 120 A 500 ms signalling circuit 140 A 100 ms signalling circuit 320 A <= 104 F (40 C) 10 s power circuit 720 A <= 104 F (40 C) 1 s power circuit 72 A <= 104 F (40 C) 10 min power circuit 165 A <= 104 F (40 C) 1 min power circuit Associated fuse rating 80 A gG at <= 690 V coordination type 1 power circuit 80 A gG at <= 690 V coordination type 2 power circuit 10 A gG signalling circuit conforming to IEC 60947-5-1 Average impedance 1.6 mOhm at 50 Hz - Ith 60 A power circuit Mar 14, 2018 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Ui rated insulation voltage 600 V power circuit certifications CSA 600 V power circuit certifications UL 690 V power circuit conforming to IEC 60947-4-1 690 V signalling circuit conforming to IEC 60947-1 600 V signalling circuit certifications CSA 600 V signalling circuit certifications UL Electrical durability 1.4 Mcycles 60 A AC-1 at Ue <= 440 V Power dissipation per pole 5.8 W AC-1 Protective cover With Mounting support Rail Plate Standards CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 Product certifications GL CSA DNV LROS (Lloyds register of shipping) BV UL CCC GOST RINA Connections - terminals Control circuit: screw clamp terminals 2 cable(s) 0...0 in (1...2.5 mm) - cable stiffness: flexible - with cable end Control circuit: screw clamp terminals 1 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: flexible - without cable end Control circuit: screw clamp terminals 2 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: flexible - without cable end Control circuit: screw clamp terminals 1 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: flexible - with cable end Control circuit: screw clamp terminals 1 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: solid - without cable end Control circuit: screw clamp terminals 2 cable(s) 0...0.01 in (1...4 mm) - cable stiffness: solid - without cable end Power circuit : screw clamp terminal 1 cable(s) 1...35 mm - cable stiffness: solid - without cable end Power circuit : screw clamp terminal 1 cable(s) 1...35 mm - cable stiffness: flexible - without cable end Power circuit : screw clamp terminal 1 cable(s) 1...35 mm - cable stiffness: flexible - with cable end Power circuit : screw clamp terminal 2 cable(s) 1...25 mm - cable stiffness: flexible - with cable end Power circuit : screw clamp terminal 2 cable(s) 1...25 mm - cable stiffness: solid - without cable end Power circuit : screw clamp terminal 2 cable(s) 1...25 mm - cable stiffness: flexible - without cable end Tightening torque Control circuit: 15.04 lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver flat 6 mm Control circuit: 15.04 lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver Philips No 2 Power circuit: 70.8 lbf.in (8 N.m) - on screw clamp terminals - cable 0.04...0.05 in (25...35 mm) hexagonal 0.16 in (4 mm) Power circuit : 5 N.m - on screw clamp terminals - cable 1...25 mm hexagonal 4 mm Operating time 12...26 ms closing 4...19 ms opening Safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 Mechanical durability 6 Mcycles Operating rate 3600 cyc/h at <= 140 F (60 C) Complementary Coil technology Without built-in suppressor module Control circuit voltage limits 0.3...0.6 Uc drop-out at 140 F (60 C), AC 50/60 Hz 0.8...1.1 Uc operational at 140 F (60 C), AC 50 Hz 0.85...1.1 Uc operational at 140 F (60 C), AC 60 Hz Inrush power in VA 140 VA at 68 F (20 C) (cos 0.75) 60 Hz 160 VA at 68 F (20 C) (cos 0.75) 50 Hz Hold-in power consumption in VA 13 VA at 68 F (20 C) (cos 0.3) 60 Hz 15 VA at 68 F (20 C) (cos 0.3) 50 Hz 2