LC2D32F7 Schneider

Product data sheet LC2D32F7 Characteristics TeSys D reversing contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A - 110 V AC coil Main Commercial Status Commercialised Range of product TeSys D Product or component Reversing contactor type Device short name LC2D Contactor application Motor control Resistive load Utilisation category AC-1 AC-3 Device presentation Preassembled with reversing power busbar Poles description 3P Power pole contact 3 NO composition Ue rated operational <= 300 V DC for power circuit voltage <= 690 V AC 25...400 Hz for power circuit Ie rated operational 50 A (<= 60 C) at <= 440 V AC AC-1 for power cir- current cuit 32 A (<= 60 C) at <= 440 V AC AC-3 for power cir- cuit Motor power kW 18.5 kW at 660...690 V AC 50/60 Hz 18.5 kW at 500 V AC 50/60 Hz 15 kW at 415...440 V AC 50/60 Hz 15 kW at 380...400 V AC 50/60 Hz 7.5 kW at 220...230 V AC 50/60 Hz Motor power HP (UL / 30 hp at 575/600 V AC 50/60 Hz for 3 phases mo- CSA) tors 20 hp at 460/480 V AC 50/60 Hz for 3 phases mo- tors 10 hp at 230/240 V AC 50/60 Hz for 3 phases mo- tors 7.5 hp at 200/208 V AC 50/60 Hz for 3 phases mo- tors 5 hp at 230/240 V AC 50/60 Hz for 1 phase motors 2 hp at 115 V AC 50/60 Hz for 1 phase motors Control circuit type AC 50/60 Hz Control circuit voltage 110 V AC 50/60 Hz Auxiliary contact com- 1 NO + 1 NC position Uimp rated impulse 6 kV conforming to IEC 60947 withstand voltage Overvoltage category III Ith conventional free 50 A at <= 60 C for power circuit air thermal current 10 A at <= 60 C for signalling circuit Irms rated making ca- 550 A at 440 V for power circuit conforming to IEC pacity 60947 250 A DC for signalling circuit conforming to IEC 60947-5-1 140 A AC for signalling circuit conforming to IEC 60947-5-1 Rated breaking capac- 550 A at 440 V for power circuit conforming to IEC ity 60947 Icw rated short-time 430 A <= 40 C 1 s power circuit withstand current 260 A <= 40 C 10 s power circuit 138 A <= 40 C 1 min power circuit 60 A <= 40 C 10 min power circuit 140 A 100 ms signalling circuit 120 A 500 ms signalling circuit 100 A 1 s signalling circuit Jul 5, 2013 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Associated fuse rating 63 A gG at <= 690 V coordination type 2 for power circuit 63 A gG at <= 690 V coordination type 1 for power circuit 10 A gG for signalling circuit conforming to IEC 60947-5-1 Average impedance 2 mOhm at 50 Hz - Ith 50 A for power circuit Ui rated insulation 600 V for signalling circuit certifications UL voltage 600 V for signalling circuit certifications CSA 690 V for signalling circuit conforming to IEC 60947-1 600 V for power circuit certifications UL 600 V for power circuit certifications CSA 690 V for power circuit conforming to IEC 60947-4-1 Electrical durability 1.4 Mcycles 50 A AC-1 at Ue <= 440 V 1.65 Mcycles 32 A AC-3 at Ue <= 440 V Power dissipation per 5 W AC-1 pole 2 W AC-3 Safety cover With Interlocking type Mechanical Mounting support Plate Rail Standards EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 CSA C22.2 No 14 Product certifications BV CCC CSA DNV GL GOST RINA UL LROS Connections - terminals Power circuit: screw clamp terminals 2 cable(s) 2.5...10 mm - cable stiffness: solid - without cable end Power circuit: screw clamp terminals 1 cable(s) 1.5...10 mm - cable stiffness: solid - without cable end Power circuit: screw clamp terminals 2 cable(s) 1.5...6 mm - cable stiffness: flexible - with cable end Power circuit: screw clamp terminals 1 cable(s) 1...10 mm - cable stiffness: flexible - with cable end Power circuit: screw clamp terminals 2 cable(s) 2.5...10 mm - cable stiffness: flexible - without cable end Power circuit: screw clamp terminals 1 cable(s) 2.5...10 mm - cable stiffness: flexible - without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm - cable stiffness: solid - without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: solid - without cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm - cable stiffness: flexible - with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: flexible - with cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm - cable stiffness: flexible - without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: flexible - without cable end Tightening torque Power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver Philips No 2 Power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver flat 6 mm Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat 6 mm 2