LP1D80008BW Schneider

Product data sheet LP1D80008BW Characteristics TeSys D contactor - 4P(2 NO + 2 NC) - AC-1 - <= 440 V 125 A - 24 V DC coil Main Range TeSys Product name TeSys D Product or component type Contactor Device short name LP1D Contactor application Resistive load Utilisation category AC-1 Poles description 4P Pole contact composition 2 NO + 2 NC Ue rated operational voltage <= 300 V DC for power circuit <= 1000 V AC 25...400 Hz for power circuit Ie rated operational current 125 A (<= 60 C) at <= 440 V AC AC-1 for power circuit Uc control circuit voltage 24 V DC Coil type Wide range Uimp rated impulse withstand voltage 8 kV conforming to IEC 60947 Overvoltage category III Ith conventional free air thermal 125 A at <= 60 C for power circuit current Irms rated making capacity 1100 A at 440 V for power circuit conforming to IEC 60947 Rated breaking capacity 1100 A at 440 V for power circuit conforming to IEC 60947 Icw rated short-time withstand current 135 A <= 40 C 10 min power circuit 640 A <= 40 C 10 s power circuit 990 A <= 40 C 1 s power circuit 320 A <= 40 C 1 min power circuit Associated fuse rating 160 A gG at <= 690 V coordination type 2 for power circuit 200 A gG at <= 690 V coordination type 1 for power circuit Average impedance 0.8 mOhm at 50 Hz - Ith 125 A for power circuit Ui rated insulation voltage 1000 V for power circuit conforming to IEC 60947-4-1 600 V for power circuit certifications CSA 600 V for power circuit certifications UL Electrical durability 0.8 Mcycles 125 A AC-1 at Ue <= 440 V Power dissipation per pole 12.5 W AC-1 Protective cover Without Mounting support Plate Rail Dec 28, 2017 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applicationsStandards CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 Product certifications UL CSA CCC EAC GL BV DNV LROS (Lloyds register of shipping) Connections - terminals Control circuit : screw clamp terminals 2 cable(s) 1...2.5 mm - cable stiffness: flexible - with cable end Control circuit : screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: flexible - without cable end Control circuit : screw clamp terminals 2 cable(s) 1...4 mm - cable stiffness: flexible - without cable end Control circuit : screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: solid - without cable end Control circuit : screw clamp terminals 2 cable(s) 1...4 mm - cable stiffness: solid - without cable end Control circuit : screw clamp terminals 1 cable(s) 1...2.5 mm - cable stiffness: flexible - with cable end Power circuit : connector 1 cable(s) 4...50 mm - cable stiffness: flexible - without cable end Power circuit : connector 2 cable(s) 4...25 mm - cable stiffness: flexible - without cable end Power circuit : connector 1 cable(s) 4...50 mm - cable stiffness: flexible - with cable end Power circuit : connector 2 cable(s) 4...16 mm - cable stiffness: flexible - with cable end Power circuit : connector 1 cable(s) 4...50 mm - cable stiffness: solid - without cable end Power circuit : connector 2 cable(s) 4...25 mm - cable stiffness: solid - without cable end Tightening torque Control circuit : 1.7 N.m - on screw clamp terminals - with screwdriver flat 6 mm Control circuit : 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 Power circuit : 9 N.m - on connector - with screwdriver flat 6 to 8 mm Power circuit : 9 N.m - on connector hexagonal 4 mm Operating time 20...35 ms closing 6...20 ms opening Safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 Mechanical durability 4 Mcycles Operating rate 3600 cyc/h at <= 60 C Complementary Coil technology Without built-in suppressor module Control circuit voltage limits 0.75...1.2 Uc operational at 55 C, DC 0.1...0.3 Uc drop-out at 55 C, DC Time constant 75 ms Inrush power in W 22 W at 20 C Hold-in power consumption in W 22 W at 20 C Environment IP degree of protection IP20 front face conforming to IEC 60529 Protective treatment TH conforming to IEC 60068-2-30 Pollution degree 3 Ambient air temperature for operation -5...60 C Ambient air temperature for storage -60...80 C Permissible ambient air temperature -40...70 C at Uc around the device Operating altitude 3000 m without derating in temperature Fire resistance 850 C conforming to IEC 60695-2-1 Flame retardance V1 conforming to UL 94 Mechanical robustness Vibrations contactor open 2 Gn, 5...300 Hz Shocks contactor open 8 Gn for 11 ms Vibrations contactor closed 3 Gn, 5...300 Hz 2