NSYCVF38M230PF Schneider

Product data sheet NSYCVF38M230PF Characteristics ClimaSys forced vent. IP54, 38m3/h, 230V, with outlet grille and filter G2 Main Range ClimaSys CV Category Fan Type of filter Standard Flow rate Free flow rate with standard filter : 39 m3/h at 60 Hz Free flow rate with standard filter : 38 m3/h at 50 Hz Us rated supply volt- 150...250 V age Input voltage 230 V 50/60 Hz Complementary Absorbed power 4.8 W 60 Hz 4.5 W 50 Hz In rated current 0.17 A 60 Hz 0.16 A 50 Hz Noise level < at 40...41 dB Bearing type Ball Height External : 137 mm Width External : 117 mm Depth External : 49 mm Cut-out dimensions 92 x 92 mm Product weight 0.22 kg Material Injected thermoplastic (ASA PC) for outlet grille Colour Outlet grille : grey RAL 7035 Ambient air temperature for operation -10...70 C Ambient air temperature for storage -40...70 C Maximum pressure 29 Pa flow rate 0 m/h Connections - terminals Cable IP degree of protection IP54 Device composition 1 cut-out template 1 outlet grille front 1 filter front of axial motor 2 protective grille on the front and rear surfaces 1 axial motor Condition of use Outside temperature must be 5 C lower than inside temperature Filter must be cleaned and replaced regularly Surrounding environment must be relatively clean Overfrequent filter replacement should be avoided Flow rates depends on the work point, see ProClima software Additional information -MUST NOT be connected to a power conversion module, an inverter or UPS type of power supply Jun 16, 2015 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Offer Sustainability Sustainable offer status Green Premium product RoHS (date code: YYWW) Compliant - since 0940 - Schneider Electric declaration of conformity REACh Reference not containing SVHC above the threshold Product environmental profile Available Download Product Environmental Product end of life instructions Need no specific recycling operations 2